Use the bad block parser introduced in 77692d6112 for the NETGEAR R6800
and its clones: R6700 v2, R6900 v2, R7200 and R7450. Tested on a R6800.
Signed-off-by: Stijn Segers <f...@volatilesystems.org>
---
target/linux/ramips/dts/mt7621_netgear_sercomm_bzv.dtsi | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/target/linux/ramips/dts/mt7621_netgear_sercomm_bzv.dtsi
b/target/linux/ramips/dts/mt7621_netgear_sercomm_bzv.dtsi
index 2be3f87869..87b4872d33 100644
--- a/target/linux/ramips/dts/mt7621_netgear_sercomm_bzv.dtsi
+++ b/target/linux/ramips/dts/mt7621_netgear_sercomm_bzv.dtsi
@@ -215,47 +215,54 @@
status = "okay";
partitions {
- compatible = "fixed-partitions";
+ compatible = "sercomm,sc-partitions", "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x100000>;
+ sercomm,scpart-id = <0>;
read-only;
};
partition@100000 {
label = "SC PART_MAP";
reg = <0x100000 0x100000>;
+ sercomm,scpart-id = <1>;
read-only;
};
partition@200000 {
label = "kernel";
reg = <0x200000 0x400000>;
+ sercomm,scpart-id = <2>;
};
partition@600000 {
label = "ubi";
reg = <0x600000 0x2800000>;
+ sercomm,scpart-id = <3>;
};
partition@2e00000 {
label = "reserved0";
reg = <0x2e00000 0x1800000>;
+ sercomm,scpart-id = <4>;
read-only;
};
factory: partition@4600000 {
label = "factory";
reg = <0x4600000 0x200000>;
+ sercomm,scpart-id = <5>;
read-only;
};
partition@4800000 {
label = "reserved1";
reg = <0x4800000 0x3800000>;
+ sercomm,scpart-id = <6>;
read-only;
};
};
--
2.36.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
