Hello!
Well, looking at the wiki page I haven't found these informations - and then I
was interested to know if there was a way to do it with cURL and maybe someone
had a device around to help me out.
May you point me to the relevant text ?
Thanks!
Enrico
On Fri, 6 May 2022, tmo wrote:
Date: Fri, 6 May 2022 12:21:37
From: tmo <tm...@gmx.de>
To: Enrico Mioso <mrkiko...@gmail.com>,
OpenWrt Development List <openwrt-devel@lists.openwrt.org>
Cc: Rustam Gaptulin <rasc...@gmail.com>, John Crispin <j...@openwrt.org>,
Dominik Menke <d...@digineo.de>, Mathias Kresin <d...@kresin.me>,
Felix Fietkau <n...@nbd.name>, Andreas Ziegler <d...@andreas-ziegler.de>
Subject: Re: Installing OpenWRt on the ZBT WG3526
Am 6. Mai 2022 11:30:29 MESZ schrieb Enrico Mioso <mrkiko...@gmail.com>:
Hello!!
In the next days i will install OpenWRt on a new ZBT WG3526 device. I used one
in the past, but don't remember how the initial installation had to be
performed.
Furthermore, at that time I had "sighed" assistance - that I might not have
today.
My questions are:
1) What's the best course of action to switch from stock OpenWrt-based firmware
to OpenWrt?
Should I use sysupgrade with -F -n or is another procedure recommended? Of
course, before I would take backup of flash.
2) If I should use bootloader to do this, may someone help me out extracting a
curl command that would upload the firmware?
Or is the bootloader working with lynx for upload? I know this is pretty much a
matter of luck, and things can change in case-by-case basis.
Thanks a lot,
Enrico
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
Have you checked the installation instructions on the WG3526 devicepage in the
OpenWrt wiki?
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
