On 2022-02-02 11:39, Torsten Duwe wrote:
Enable the USB_XHCI_PCI_RENESAS config option on lantiq and note the
usb3 dependency. The XHCI host controller requires a firmware blob,
see https://forum.openwrt.org/t/2071
Signed-off-by: Torsten Duwe <d...@lst.de>
---
package/kernel/linux/modules/usb.mk | 1 +
target/linux/lantiq/config-5.10 | 2 ++
2 files changed, 3 insertions(+)
diff --git a/package/kernel/linux/modules/usb.mk
b/package/kernel/linux/modules/usb.mk
index f74c02a99f..72bdce4bd8 100644
--- a/package/kernel/linux/modules/usb.mk
+++ b/package/kernel/linux/modules/usb.mk
@@ -1713,6 +1713,7 @@ define KernelPackage/usb3
+TARGET_bcm53xx:kmod-phy-bcm-ns-usb3 \
+TARGET_ramips_mt7621:kmod-usb-xhci-mtk \
+(TARGET_apm821xx_nand&&LINUX_5_10):kmod-usb-xhci-pci-renesas \
+ +TARGET_lantiq:kmod-usb-xhci-pci-renesas \
+TARGET_mvebu_cortexa9:kmod-usb-xhci-pci-renesas
KCONFIG:= \
CONFIG_USB_PCI=y \
diff --git a/target/linux/lantiq/config-5.10
b/target/linux/lantiq/config-5.10
index a830689e23..9e7874bd5d 100644
--- a/target/linux/lantiq/config-5.10
+++ b/target/linux/lantiq/config-5.10
@@ -220,5 +220,7 @@ CONFIG_SYS_SUPPORTS_VPE_LOADER=y
CONFIG_TARGET_ISA_REV=2
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_TINY_SRCU=y
+CONFIG_USB_XHCI_PCI=y
+CONFIG_USB_XHCI_PCI_RENESAS=y
That would switch on the driver for all lantiq SOC.
Doesn't that only make sense for the xrx200?
CONFIG_USE_OF=y
CONFIG_WATCHDOG_CORE=y
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
