Hi, I tested the series on a Mikrotik LHG 2.
# cat /proc/mtd dev: size erasesize name mtd0: 00020000 00010000 "RouterBoot" mtd1: 0000e000 00010000 "bootloader1" mtd2: 00001000 00010000 "hard_config" mtd3: 00001000 00010000 "bios" mtd4: 0000f000 00010000 "bootloader2" mtd5: 00001000 00001000 "soft_config" mtd6: 00fe0000 00010000 "firmware" mtd7: 00290000 00010000 "kernel" mtd8: 00d50000 00010000 "rootfs" mtd9: 009e0000 00010000 "rootfs_data" => erasesize of soft_config is smaller # cat /sys/firmware/mikrotik/soft_config/boot_proto [bootp] dhcp # echo dhcp > /sys/firmware/mikrotik/soft_config/boot_proto # cat /sys/firmware/mikrotik/soft_config/commit dirty # echo 1 > /sys/firmware/mikrotik/soft_config/commit # cat /sys/firmware/mikrotik/soft_config/boot_proto bootp [dhcp] # cat /sys/firmware/mikrotik/soft_config/commit clean => No error, change is written to flash sysupgrade is also ok, configuration ist saved. Tested-by: Stefan Hellermann <ste...@the2masters.de> _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
