On Tue, Nov 16, 2021 at 3:40 PM Enrico Mioso <mrkiko...@gmail.com> wrote: > Does the device use ZLoader?
If you mean Zyxel bootloader, then no. The board utilizes U-boot with some PandoraBox patches according to the logo printed to the serial console. > Is a recovery mode available? (maybe document it in the commit) Vendor does not mention any recovery mode in the documentation. You could connect to the serial console and use regular U-boot commandы to recover the firmware. > Does it require LZMA loader for 5.10? Did not test with the 5.10 kernel, but looks like it should run smoothly on the board. What are the specific requirements for LZMA loader usage besides the kernel size limitation? 5.10 is not smaller than 5.4. So, if the 5.4 based firmware requires the LZMA loader to boot with a typical MT7621 U-boot, then 5.10 will require it too. -- Sergey _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
