Hi Adrian, Thanks for testing
On Tue, Oct 5, 2021 at 5:57 PM Adrian Schmutzler <m...@adrianschmutzler.de> wrote: > Won't build for me (with build bot settings and all packages installed): I usually build a minimal configuration with a couple of extra packages that I need as building all of them is not feasible on my current development environment. >From looking at the log snippet on your e-mail, it seems to be failing to build mac80211 or one of its components / drivers. My current build configuration does not include this, that's probably the reason I didn't catch it. A also looked at the log of the build bots and there seems to be something odd going on even on kernel 5.4. I'll investigate the error and attempt to fix it for 5.10 so the build is clean. A couple of messages from the build bots on kernel 5.4: > ERROR: module > '/builder/shared-workdir/build/build_dir/target-arm_cortex-a9+neon_musl_eabi/linux-zynq/backports-5.10.68-1/drivers/net/wireless/intersil/orinoco/orinoco.ko' > is missing. > make[2]: *** [Makefile:564: > /builder/shared-workdir/build/bin/targets/zynq/generic/packages/kmod-hermes_5.4.150+5.10.68-1-1_arm_cortex-a9_neon.ipk] > Error 1 > make[2]: Leaving directory > '/builder/shared-workdir/build/package/kernel/mac80211' > time: package/kernel/mac80211/compile#830.81#47.71#222.36 > ERROR: package/kernel/mac80211 failed to build. But then the mac80211 package is available for download at the snapshot directory. Regards, Luis Araneda. _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
