Hi, > --- a/target/linux/sunxi/image/cortexa7.mk > +++ b/target/linux/sunxi/image/cortexa7.mk > @@ -64,7 +64,10 @@ TARGET_DEVICES += friendlyarm_zeropi define > Device/lamobo_lamobo-r1 > DEVICE_VENDOR := Lamobo > DEVICE_MODEL := Lamobo R1 > - DEVICE_PACKAGES:=kmod-ata-sunxi kmod-rtl8192cu swconfig wpad-basic- > wolfssl > + DEVICE_ALT0_VENDOR := Bananapi > + DEVICE_ALT0_MODEL := BPi-R1 > + DEVICE_PACKAGES := kmod-ata-sunxi kmod-rtl8192cu wpad-basic-wolfssl > + DEVICE_COMPAT_VERSION := 2.0
compat_version needs to be set in two places. First for the image, which you did here, and second for the config, which you seem to miss (board.d or uci-default, depending on what kind of change you do). Apart from that, note that changing the major version means that upgrade is not possible at all (even without saving config), and factory flashing is required. I would rather have expected version 1.1 here, since your change should be covered by an update without keeping config (sysupgrade -n)? Apart from that, adding a proper message would help. You should get an overview of all the necessary changes here: https://github.com/openwrt/openwrt/commit/494f12c52df6767ec0fabf2b2fac8f4533 23a4c5 For a single device, you would probably not need the separate Device/dsa-migration definition, though, but could just add the two variables to the device. Best Adrian > SOC := sun7i-a20 > endef > TARGET_DEVICES += lamobo_lamobo-r1 > -- > 2.33.0 > > > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/mailman/listinfo/openwrt-devel _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
