--- Begin Message ---
Bump at91 targets to kernel v5.10. With this, patches and files for
wb45n and wb50n were removed as they are now included in upstream
kernel.
Signed-off-by: Claudiu Beznea <claudiu.bez...@microchip.com>
---
target/linux/at91/Makefile | 2 +-
.../at91/files/arch/arm/boot/dts/wb45n.dts | 220 ------------------
.../at91/files/arch/arm/boot/dts/wb50n.dts | 113 ---------
.../at91/files/arch/arm/boot/dts/wb50n.dtsi | 205 ----------------
target/linux/at91/image/sam9x.mk | 1 +
target/linux/at91/image/sama5.mk | 1 +
.../101-ARM-at91-build-dtb-for-q5xr5.patch | 10 +
.../101-ARM-at91-build-dtb-for-q5xr5.patch | 10 -
.../102-ARM-at91-build-dtb-for-wb45n.patch | 12 -
...2-ARM-at91-wb45n-fix-duplicate-label.patch | 20 --
.../103-ARM-at91-build-dtb-for-wb50n.patch | 12 -
...3-ARM-at91-wb50n-fix-duplicate-label.patch | 39 ----
12 files changed, 13 insertions(+), 632 deletions(-)
delete mode 100644 target/linux/at91/files/arch/arm/boot/dts/wb45n.dts
delete mode 100644 target/linux/at91/files/arch/arm/boot/dts/wb50n.dts
delete mode 100644 target/linux/at91/files/arch/arm/boot/dts/wb50n.dtsi
create mode 040000 target/linux/at91/patches-5.10
create mode 100644
target/linux/at91/patches-5.10/101-ARM-at91-build-dtb-for-q5xr5.patch
delete mode 040000 target/linux/at91/patches-5.4
delete mode 100644
target/linux/at91/patches-5.4/101-ARM-at91-build-dtb-for-q5xr5.patch
delete mode 100644
target/linux/at91/patches-5.4/102-ARM-at91-build-dtb-for-wb45n.patch
delete mode 100644
target/linux/at91/patches-5.4/102-ARM-at91-wb45n-fix-duplicate-label.patch
delete mode 100644
target/linux/at91/patches-5.4/103-ARM-at91-build-dtb-for-wb50n.patch
delete mode 100644
target/linux/at91/patches-5.4/103-ARM-at91-wb50n-fix-duplicate-label.patch
diff --git a/target/linux/at91/Makefile b/target/linux/at91/Makefile
index fe6a93244a5f..e4da7fb7e7da 100644
--- a/target/linux/at91/Makefile
+++ b/target/linux/at91/Makefile
@@ -10,7 +10,7 @@ BOARDNAME:=Microchip (Atmel AT91)
FEATURES:=ext4 squashfs targz usb usbgadget ubifs
SUBTARGETS:=sama5 sam9x
-KERNEL_PATCHVER:=5.4
+KERNEL_PATCHVER:=5.10
include $(INCLUDE_DIR)/target.mk
diff --git a/target/linux/at91/files/arch/arm/boot/dts/wb45n.dts
b/target/linux/at91/files/arch/arm/boot/dts/wb45n.dts
deleted file mode 100644
index fd9d260f2ab5..000000000000
--- a/target/linux/at91/files/arch/arm/boot/dts/wb45n.dts
+++ /dev/null
@@ -1,220 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * wb45n.dts - Device Tree file for WB45NBT board
- *
- * Copyright (C) 2015 Laird
- */
-
-/dts-v1/;
-#include "at91sam9g25.dtsi"
-
-/ {
- model = "Laird Workgroup Bridge 45N - Atmel AT91SAM (dt)";
- compatible = "laird,wb45n", "laird,wbxx", "atmel,at91sam9x5",
"atmel,at91sam9";
-
- chosen {
- bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw
rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
- };
-
- memory {
- reg = <0x20000000 0x4000000>;
- };
-
- clocks {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- main_clock: clock@0 {
- compatible = "atmel,osc", "fixed-clock";
- clock-frequency = <12000000>;
- };
-
- slow_xtal {
- clock-frequency = <32768>;
- };
-
- main_xtal {
- clock-frequency = <12000000>;
- };
- };
-
- ahb {
- apb {
-
- rstc@fffffe00 {
- compatible = "atmel,sama5d3-rstc";
- };
-
- pinctrl@fffff400 {
- nand {
- pinctrl_nand: nand-0 {
- atmel,pins =
- <AT91_PIOD 0
AT91_PERIPH_A AT91_PINCTRL_NONE /* PD0 periph A Read Enable */
- AT91_PIOD 1
AT91_PERIPH_A AT91_PINCTRL_NONE /* PD1 periph A Write Enable */
- AT91_PIOD 2
AT91_PERIPH_A AT91_PINCTRL_NONE /* PD2 periph A Address Latch Enable */
- AT91_PIOD 3
AT91_PERIPH_A AT91_PINCTRL_NONE /* PD3 periph A Command Latch Enable */
- AT91_PIOD 4
AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP /* PD4 gpio Chip Enable pin pull_up
*/
- AT91_PIOD 5
AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PD5 gpio RDY/BUSY pin pull_up */
- };
- };
-
- usb2 {
- pinctrl_board_usb2: usb2-board {
- atmel,pins =
- <AT91_PIOB 11
AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PB11 gpio vbus sense,
deglitch */
- };
- };
- };
-
- dbgu: serial@fffff200 {
- status = "okay";
- };
-
- usart0: serial@f801c000 {
- status = "okay";
- };
-
- usart3: serial@f8028000 {
- status = "okay";
- };
-
- spi0: spi@f0000000 {
- status = "okay";
- cs-gpios = <&pioA 14 0>, <&pioA 7 0>, <0>, <0>;
- };
-
- mmc0: mmc@f0008000 {
- pinctrl-0 = <
- &pinctrl_mmc0_slot0_clk_cmd_dat0
- &pinctrl_mmc0_slot0_dat1_3>;
- status = "okay";
- /delete-property/dmas;
- /delete-property/dma-names;
- slot@0 {
- reg = <0>;
- bus-width = <4>;
- };
- };
-
- macb0: ethernet@f802c000 {
- phy-mode = "rmii";
- status = "okay";
- };
-
- usb2: gadget@f803c000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_board_usb2>;
- atmel,vbus-gpio = <&pioB 11 GPIO_ACTIVE_HIGH>;
- status = "okay";
- };
-
- i2c1: i2c@f8014000 {
- status = "okay";
- };
-
- watchdog@fffffe40 {
- status = "okay";
- };
-
- shdwc@fffffe10 {
- atmel,wakeup-mode = "low";
- };
-
- rtc@fffffeb0 {
- status = "okay";
- };
- };
-
- usb0: ohci@00600000 {
- status = "okay";
- num-ports = <2>;
- atmel,vbus-gpio = <
- &pioB 12 GPIO_ACTIVE_HIGH
- &pioA 31 GPIO_ACTIVE_HIGH
- >;
- atmel,oc-gpio = <&pioB 13 GPIO_ACTIVE_LOW>;
- };
-
- usb1: ehci@00700000 {
- status = "okay";
- };
-
- nand0: nand@40000000 {
- nand-bus-width = <8>;
- nand-ecc-mode = "hw";
- atmel,has-pmecc; /* Enable PMECC */
- atmel,pmecc-cap = <4>;
- atmel,pmecc-sector-size = <512>;
- nand-on-flash-bbt;
- status = "okay";
-
- at91bootstrap@0 {
- label = "at91bs";
- reg = <0x0 0x20000>;
- };
-
- uboot@20000 {
- label = "u-boot";
- reg = <0x20000 0x80000>;
- };
-
- ubootenv@a0000 {
- label = "u-boot-env";
- reg = <0xa0000 0x20000>;
- };
-
- ubootenv@c0000 {
- label = "redund-env";
- reg = <0xc0000 0x20000>;
- };
-
- kernel-a@e0000 {
- label = "kernel-a";
- reg = <0xe0000 0x280000>;
- };
-
- kernel-b@360000 {
- label = "kernel-b";
- reg = <0x360000 0x280000>;
- };
-
- rootfs-a@5e0000 {
- label = "rootfs-a";
- reg = <0x5e0000 0x2600000>;
- };
-
- rootfs-b@2be0000 {
- label = "rootfs-b";
- reg = <0x2be0000 0x2600000>;
- };
-
- user@51e0000 {
- label = "user";
- reg = <0x51e0000 0x2dc0000>;
- };
-
- logs@7fa0000 {
- label = "logs";
- reg = <0x7fa0000 0x60000>;
- };
- };
- };
-
- atheros {
- compatible = "atheros,ath6kl";
- atheros,board-id = "SD32";
- };
-
- keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- irqbtn@pb18 {
- label = "IRQBTN";
- linux,code = <99>;
- gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
- gpio-key,wakeup = <1>;
- };
- };
-};
diff --git a/target/linux/at91/files/arch/arm/boot/dts/wb50n.dts
b/target/linux/at91/files/arch/arm/boot/dts/wb50n.dts
deleted file mode 100644
index 15b10a8b06c9..000000000000
--- a/target/linux/at91/files/arch/arm/boot/dts/wb50n.dts
+++ /dev/null
@@ -1,113 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * wb50n.dts - Device Tree file for wb50n board
- *
- * Copyright (C) 2015 Laird
- */
-
-/dts-v1/;
-#include "wb50n.dtsi"
-
-/ {
- model = "Laird Workgroup Bridge 50N - Atmel SAMA5D";
- compatible = "laird,wb50n", "atmel,sama5d31ek", "atmel,sama5d3xmb",
"atmel,sama5d3xcm", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
-
- chosen {
- bootargs = "console=ttyS0,115200 earlyprintk loglevel=4
mem=64M";
- };
-
- ahb {
-
- apb {
- mmc0: mmc@f0000000 {
- status = "okay";
- };
-
- macb1: ethernet@f802c000 {
- status = "okay";
- };
-
- dbgu: serial@ffffee00 {
- status = "okay";
- };
-
- /* On BB40 this port is labeled UART1 */
- usart0: serial@f001c000 {
- status = "okay";
- };
-
- /* On BB40 this port is labeled UART0 */
- usart1: serial@f0020000 {
- status = "okay";
- };
-
- i2c0: i2c@f0014000 {
- status = "okay";
- };
-
- spi1: spi@f8008000 {
- status = "okay";
-
- spidev@0 {
- compatible = "spidev";
- reg = <0>;
- spi-max-frequency = <8000000>;
- };
- };
-
- watchdog@fffffe40 {
- status = "okay";
- };
- };
-
- usb0: gadget@00500000 {
- status = "okay";
- };
-
- usb1: ohci@00600000 {
- status = "okay";
- };
-
- usb2: ehci@00700000 {
- status = "okay";
- };
- };
-
- keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- btn0@pa10 {
- label = "BTNESC";
- linux,code = <1>; /* ESC button */
- gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
- gpio-key,wakeup = <1>;
- };
-
- irqbtn@pe31 {
- label = "IRQBTN";
- linux,code = <99>; /* SysReq button */
- gpios = <&pioE 31 GPIO_ACTIVE_LOW>;
- gpio-key,wakeup = <1>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- led0 {
- label = "wb50n:blue:led0";
- gpios = <&pioA 12 GPIO_ACTIVE_LOW>;
- };
-
- led1 {
- label = "wb50n:green:led1";
- gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
- };
-
- led2 {
- label = "wb50n:red:led2";
- gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
- };
- };
-};
diff --git a/target/linux/at91/files/arch/arm/boot/dts/wb50n.dtsi
b/target/linux/at91/files/arch/arm/boot/dts/wb50n.dtsi
deleted file mode 100644
index 936cce39ed7f..000000000000
--- a/target/linux/at91/files/arch/arm/boot/dts/wb50n.dtsi
+++ /dev/null
@@ -1,205 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * wb50n.dts - Device Tree file for wb50n board
- *
- * Copyright (C) 2015 Laird
- */
-
-#include "sama5d31.dtsi"
-
-/ {
- model = "Laird Workgroup Bridge 50N - Atmel SAMA5D";
- compatible = "laird,wb50n", "atmel,sama5d31ek", "atmel,sama5d3xmb",
"atmel,sama5d3xcm", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
-
- chosen {
- bootargs = "console=ttyS0,115200 earlyprintk loglevel=4
mem=64M";
- };
-
- memory {
- reg = <0x20000000 0x4000000>;
- };
-
- clocks {
- slow_xtal {
- clock-frequency = <32768>;
- };
-
- main_xtal {
- clock-frequency = <12000000>;
- };
- };
-
- ahb {
-
- apb {
- pmc: pmc@fffffc00 {
- main: mainck {
- clock-frequency = <12000000>;
- };
-
- periphck {
- usart1_clk: usart1_clk {
- #clock-cells = <0>;
- reg = <13>;
- atmel,clk-output-range = <0
132000000>;
- };
- };
- };
-
- pinctrl@fffff200 {
- board {
- pinctrl_mmc0_cd: mmc0_cd {
- atmel,pins =
- <AT91_PIOC 26
AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PC26 GPIO with pullup
deglitch */
- };
-
- pinctrl_usba_vbus: usba_vbus {
- atmel,pins =
- <AT91_PIOB 13
AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PB13 GPIO with deglitch */
- };
- };
- };
-
- mmc0: mmc@f0000000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0
&pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
- cd-gpios = <&pioC 26 GPIO_ACTIVE_LOW>;
- slot@0 {
- reg = <0>;
- bus-width = <4>;
- };
- };
-
- mmc1: mmc@f8000000 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0
&pinctrl_mmc1_dat1_3>;
- status = "okay";
- slot@0 {
- reg = <0>;
- bus-width = <4>;
- };
- };
-
- macb1: ethernet@f802c000 {
- phy-mode = "rmii";
- };
-
-
- dbgu: serial@ffffee00 {
- dmas = <0>, <0>; /* Do not use DMA for
dbgu */
- };
-
- /* On BB40 this port is labeled UART1 */
- usart0: serial@f001c000 {
- atmel,use-dma-rx;
- atmel,use-dma-tx;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usart0
&pinctrl_usart0_rts_cts>;
- };
-
- /* On BB40 this port is labeled UART0 */
- usart1: serial@f0020000 {
- atmel,use-dma-rx;
- atmel,use-dma-tx;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usart1
&pinctrl_usart1_rts_cts>;
- dtr-gpios = <&pioD 13 GPIO_ACTIVE_LOW>;
- dsr-gpios = <&pioD 11 GPIO_ACTIVE_LOW>;
- dcd-gpios = <&pioD 7 GPIO_ACTIVE_LOW>;
- rng-gpios = <&pioD 8 GPIO_ACTIVE_LOW>;
- };
-
- /* USART3 is direct-connect to the Bluetooth UART on
the radio SIP */
- usart3: serial@f8024000 {
- atmel,use-dma-rx;
- atmel,use-dma-tx;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usart3
&pinctrl_usart3_rts_cts>;
- status = "okay";
- };
-
- spi1: spi@f8008000 {
- cs-gpios = <&pioC 25 0>, <0>, <0>, <0>;
- };
-
- sckc@fffffe50 {
- slow_osc: slow_osc {
- atmel,osc-bypass;
- };
- };
- };
-
- nand0: nand@60000000 {
- nand-bus-width = <8>;
- nand-ecc-mode = "hw";
- atmel,has-pmecc;
- atmel,pmecc-cap = <8>;
- atmel,pmecc-sector-size = <512>;
- nand-on-flash-bbt;
- status = "okay";
-
- at91bootstrap@0 {
- label = "at91bs";
- reg = <0x0 0x20000>;
- };
-
- uboot@20000 {
- label = "u-boot";
- reg = <0x20000 0x80000>;
- };
-
- ubootenv@a0000 {
- label = "u-boot-env";
- reg = <0xa0000 0x20000>;
- };
-
- ubootenv@c0000 {
- label = "u-boot-env";
- reg = <0xc0000 0x20000>;
- };
-
- kernel-a@e0000 {
- label = "kernel-a";
- reg = <0xe0000 0x500000>;
- };
-
- kernel-b@5e0000 {
- label = "kernel-b";
- reg = <0x5e0000 0x500000>;
- };
-
- rootfs-a@ae0000 {
- label = "rootfs-a";
- reg = <0xae0000 0x3000000>;
- };
-
- rootfs-b@3ae0000 {
- label = "rootfs-b";
- reg = <0x3ae0000 0x3000000>;
- };
-
- user@6ae0000 {
- label = "user";
- reg = <0x6ae0000 0x14e0000>;
- };
-
- };
-
- usb0: gadget@00500000 {
- atmel,vbus-gpio = <&pioB 13 GPIO_ACTIVE_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usba_vbus>;
- };
-
- usb1: ohci@00600000 {
- num-ports = <3>;
- atmel,vbus-gpio = <&pioA 2 GPIO_ACTIVE_LOW>;
- atmel,oc-gpio = <&pioA 4 GPIO_ACTIVE_LOW>;
- };
- };
-
- atheros {
- compatible = "atheros,ath6kl";
- atheros,board-id = "SD32";
- };
-};
diff --git a/target/linux/at91/image/sam9x.mk b/target/linux/at91/image/sam9x.mk
index 1a036e493ffa..6f10123bbaae 100644
--- a/target/linux/at91/image/sam9x.mk
+++ b/target/linux/at91/image/sam9x.mk
@@ -194,6 +194,7 @@ define Device/laird_wb45n
$(Device/evaluation-fit)
DEVICE_VENDOR := Laird
DEVICE_MODEL := WB45N
+ DEVICE_DTS := at91-wb45n
DEVICE_PACKAGES := \
kmod-mmc-at91 kmod-ath6kl-sdio ath6k-firmware \
kmod-usb-storage kmod-fs-vfat kmod-fs-msdos \
diff --git a/target/linux/at91/image/sama5.mk b/target/linux/at91/image/sama5.mk
index d644f89266d1..f8e05aae9343 100644
--- a/target/linux/at91/image/sama5.mk
+++ b/target/linux/at91/image/sama5.mk
@@ -104,6 +104,7 @@ ifeq ($(strip $(CONFIG_EXTERNAL_KERNEL_TREE)),"")
$(Device/evaluation-fit)
DEVICE_VENDOR := Laird
DEVICE_MODEL := WB50N
+ DEVICE_DTS := at91-wb50n
DEVICE_PACKAGES := \
kmod-mmc-at91 kmod-ath6kl-sdio ath6k-firmware \
kmod-usb-storage kmod-fs-vfat kmod-fs-msdos \
diff --git
a/target/linux/at91/patches-5.10/101-ARM-at91-build-dtb-for-q5xr5.patch
b/target/linux/at91/patches-5.10/101-ARM-at91-build-dtb-for-q5xr5.patch
new file mode 100644
index 000000000000..2bf8ca52ec0b
--- /dev/null
+++ b/target/linux/at91/patches-5.10/101-ARM-at91-build-dtb-for-q5xr5.patch
@@ -0,0 +1,10 @@
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -41,6 +41,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
+ at91-kizboxmini-mb.dtb \
+ at91-kizboxmini-rd.dtb \
+ at91-smartkiz.dtb \
++ at91-q5xr5.dtb \
+ at91-wb45n.dtb \
+ at91sam9g15ek.dtb \
+ at91sam9g25-gardena-smart-gateway.dtb \
diff --git
a/target/linux/at91/patches-5.4/101-ARM-at91-build-dtb-for-q5xr5.patch
b/target/linux/at91/patches-5.4/101-ARM-at91-build-dtb-for-q5xr5.patch
deleted file mode 100644
index b736b99f7fb1..000000000000
--- a/target/linux/at91/patches-5.4/101-ARM-at91-build-dtb-for-q5xr5.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -38,6 +38,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
- at91-ariettag25.dtb \
- at91-cosino_mega2560.dtb \
- at91-kizboxmini.dtb \
-+ at91-q5xr5.dtb \
- at91-wb45n.dtb \
- at91sam9g15ek.dtb \
- at91sam9g25ek.dtb \
diff --git
a/target/linux/at91/patches-5.4/102-ARM-at91-build-dtb-for-wb45n.patch
b/target/linux/at91/patches-5.4/102-ARM-at91-build-dtb-for-wb45n.patch
deleted file mode 100644
index c35ecc510a23..000000000000
--- a/target/linux/at91/patches-5.4/102-ARM-at91-build-dtb-for-wb45n.patch
+++ /dev/null
@@ -1,12 +0,0 @@
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -44,7 +44,8 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
- at91sam9g25ek.dtb \
- at91sam9g35ek.dtb \
- at91sam9x25ek.dtb \
-- at91sam9x35ek.dtb
-+ at91sam9x35ek.dtb \
-+ wb45n.dtb
- dtb-$(CONFIG_SOC_SAM_V7) += \
- at91-kizbox2.dtb \
- at91-nattis-2-natte-2.dtb \
diff --git
a/target/linux/at91/patches-5.4/102-ARM-at91-wb45n-fix-duplicate-label.patch
b/target/linux/at91/patches-5.4/102-ARM-at91-wb45n-fix-duplicate-label.patch
deleted file mode 100644
index 9d060426ec0f..000000000000
--- a/target/linux/at91/patches-5.4/102-ARM-at91-wb45n-fix-duplicate-label.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/arch/arm/boot/dts/wb45n.dts
-+++ b/arch/arm/boot/dts/wb45n.dts
-@@ -126,7 +126,7 @@
- };
- };
-
-- usb0: ohci@00600000 {
-+ usb0: ohci@600000 {
- status = "okay";
- num-ports = <2>;
- atmel,vbus-gpio = <
-@@ -136,7 +136,7 @@
- atmel,oc-gpio = <&pioB 13 GPIO_ACTIVE_LOW>;
- };
-
-- usb1: ehci@00700000 {
-+ usb1: ehci@700000 {
- status = "okay";
- };
-
diff --git
a/target/linux/at91/patches-5.4/103-ARM-at91-build-dtb-for-wb50n.patch
b/target/linux/at91/patches-5.4/103-ARM-at91-build-dtb-for-wb50n.patch
deleted file mode 100644
index ab5d7afcbbbf..000000000000
--- a/target/linux/at91/patches-5.4/103-ARM-at91-build-dtb-for-wb50n.patch
+++ /dev/null
@@ -1,12 +0,0 @@
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -66,7 +66,8 @@ dtb-$(CONFIG_SOC_SAM_V7) += \
- at91-sama5d4_ma5d4evk.dtb \
- at91-sama5d4_xplained.dtb \
- at91-sama5d4ek.dtb \
-- at91-vinco.dtb
-+ at91-vinco.dtb \
-+ wb50n.dtb
- dtb-$(CONFIG_ARCH_ATLAS6) += \
- atlas6-evb.dtb
- dtb-$(CONFIG_ARCH_ATLAS7) += \
diff --git
a/target/linux/at91/patches-5.4/103-ARM-at91-wb50n-fix-duplicate-label.patch
b/target/linux/at91/patches-5.4/103-ARM-at91-wb50n-fix-duplicate-label.patch
deleted file mode 100644
index bfe6e5a9baaa..000000000000
--- a/target/linux/at91/patches-5.4/103-ARM-at91-wb50n-fix-duplicate-label.patch
+++ /dev/null
@@ -1,39 +0,0 @@
---- a/arch/arm/boot/dts/wb50n.dts
-+++ b/arch/arm/boot/dts/wb50n.dts
-@@ -60,15 +60,15 @@
- };
- };
-
-- usb0: gadget@00500000 {
-+ usb0: gadget@500000 {
- status = "okay";
- };
-
-- usb1: ohci@00600000 {
-+ usb1: ohci@600000 {
- status = "okay";
- };
-
-- usb2: ehci@00700000 {
-+ usb2: ehci@700000 {
- status = "okay";
- };
- };
---- a/arch/arm/boot/dts/wb50n.dtsi
-+++ b/arch/arm/boot/dts/wb50n.dtsi
-@@ -185,13 +185,13 @@
-
- };
-
-- usb0: gadget@00500000 {
-+ usb0: gadget@500000 {
- atmel,vbus-gpio = <&pioB 13 GPIO_ACTIVE_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usba_vbus>;
- };
-
-- usb1: ohci@00600000 {
-+ usb1: ohci@600000 {
- num-ports = <3>;
- atmel,vbus-gpio = <&pioA 2 GPIO_ACTIVE_LOW>;
- atmel,oc-gpio = <&pioA 4 GPIO_ACTIVE_LOW>;
--
2.23.0
--- End Message ---
