devices can not boot properly during SPL stage by
using microSD card which model is SDSQUNC-032G-ZN6MA.
U-Boot SPL 2021.04 (Jul 02 2021 - 19:50:12 +0000)
Trying to boot from MMC1
mmc_load_image_raw_sector: mmc block read error
SPL: failed to boot from all boot devices
change dts and config to support booting from ultra
high speed microSD card on nanopi-r2s.
Signed-off-by: Jason Lee <jason416...@gmail.com>
---
Changes for v2:
- fix signed-off-by format
.../103-nanopi-r2s-support-UHS-card.patch | 43 +++++++++++++++++++
1 file changed, 43 insertions(+)
create mode 100644
package/boot/uboot-rockchip/patches/103-nanopi-r2s-support-UHS-card.patch
diff --git
a/package/boot/uboot-rockchip/patches/103-nanopi-r2s-support-UHS-card.patch
b/package/boot/uboot-rockchip/patches/103-nanopi-r2s-support-UHS-card.patch
new file mode 100644
index 0000000000..ad32e64c7a
--- /dev/null
+++ b/package/boot/uboot-rockchip/patches/103-nanopi-r2s-support-UHS-card.patch
@@ -0,0 +1,43 @@
+diff --git a/arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi
b/arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi
+index 9e2ced1..d546974 100644
+--- a/arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi
++++ b/arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi
+@@ -33,6 +33,10 @@
+ u-boot,dm-spl;
+ };
+
++&vcc_io_sdio {
++ u-boot,dm-spl;
++};
++
+ &gmac2io {
+ snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+diff --git a/arch/arm/dts/rk3328-nanopi-r2s.dts
b/arch/arm/dts/rk3328-nanopi-r2s.dts
+index 5445c5c..452e476 100644
+--- a/arch/arm/dts/rk3328-nanopi-r2s.dts
++++ b/arch/arm/dts/rk3328-nanopi-r2s.dts
+@@ -323,7 +323,7 @@
+ bus-width = <4>;
+ cap-sd-highspeed;
+ disable-wp;
+- pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>,
<&sdmmc0_bus4>;
++ pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>,
<&sdmmc0_bus4>, <&sdmmc0m1_gpio>;
+ pinctrl-names = "default";
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+diff --git a/configs/nanopi-r2s-rk3328_defconfig
b/configs/nanopi-r2s-rk3328_defconfig
+index 2f67439..43fd536 100644
+--- a/configs/nanopi-r2s-rk3328_defconfig
++++ b/configs/nanopi-r2s-rk3328_defconfig
+@@ -57,6 +57,10 @@ CONFIG_FASTBOOT_BUF_ADDR=0x800800
+ CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
+ CONFIG_ROCKCHIP_GPIO=y
+ CONFIG_SYS_I2C_ROCKCHIP=y
++CONFIG_MMC_IO_VOLTAGE=y
++CONFIG_SPL_MMC_IO_VOLTAGE=y
++CONFIG_MMC_UHS_SUPPORT=y
++CONFIG_SPL_MMC_UHS_SUPPORT=y
+ CONFIG_MMC_DW=y
+ CONFIG_MMC_DW_ROCKCHIP=y
+ CONFIG_SF_DEFAULT_SPEED=20000000
--
2.25.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
