The sender domain has a DMARC Reject/Quarantine policy which disallows
sending mailing list messages using the original "From" header.
To mitigate this problem, the original message has been wrapped
automatically by the mailing list software.
--- Begin Message ---
Tested-by: Sannihith Kinnera <digisla...@protonmail.com>
I have tested the provided snapshot builds, and find everything working as
expected. Thank you!
Sent with ProtonMail Secure Email.
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Tuesday, June 8th, 2021 at 3:15 PM, Petr Štetiar <yn...@true.cz> wrote:
> From: Aashish Kulkarni aashish...@gmail.com
>
> This submission relied heavily on the work of Linksys EA7300 v1/ v2.
>
> Specifications:
>
> - SoC: MediaTek MT7621A (880 MHz 2c/4t)
> - RAM: 128M DDR3-1600
> - Flash: 128M NAND
> - Eth: MediaTek MT7621A (10/100/1000 Mbps x5)
> - Radio: MT7603E/MT7613BE (2.4 GHz & 5 GHz)
> - Antennae: 2 internal fixed in the casing and 2 on the PCB
> - LEDs: Blue (x4 Ethernet)
>
> Blue+Orange (x2 Power + WPS and Internet)
> - Buttons: Reset (x1)
>
> WPS (x1)
>
> Installation:
>
> Flash factory image through GUI.
>
> This device has 2 partitions for the firmware called firmware and
>
> alt_firmware. To successfully flash and boot the device, the device
>
> should have been running from alt_firmware partition. To get the device
>
> booted through alt_firmware partition, download the OEM firmware from
>
> Linksys website and upgrade the firmware from web GUI. Once this is done,
>
> flash the OpenWrt Factory firmware from web GUI.
>
> Reverting to factory firmware:
>
> 1. Boot to 'alt_firmware'(where stock firmware resides) by doing one of
>
> the following:
>
> Press the "wps" button as soon as power LED turns on when booting.
>
> (OR) Hard-reset the router consecutively three times to force it to
>
> boot from 'alt_firmware'.
> 2. To remove any traces of OpenWRT from your router simply flash the OEM
>
> image at this point.
>
> Signed-off-by: Aashish Kulkarni aashish...@gmail.com
>
> [fix hanging indents and wrap to 74 characters per line,
>
> add kmod-mt7663-firmware-sta package for 5GHz STA mode to work,
>
> remove sysupgrade.bin and concatenate IMAGES instead in mt7621.mk,
>
> set default-state "on" for power LED]
>
> Signed-off-by: Sannihith Kinnera digisla...@protonmail.com
>
> [move check-size before append-metadata, remove trailing whitespace]
>
> Signed-off-by: Adrian Schmutzler freif...@adrianschmutzler.de
>
> (cherry picked from commit 251c995cbb1ea5ad1de14775312c2bd19ed10439)
> --------------------------------------------------------------------
>
> .../linux/ramips/dts/mt7621_linksys_e5600.dts | 182 ++++++++++++++++++
>
> target/linux/ramips/image/mt7621.mk | 23 +++
>
> .../mt7621/base-files/etc/board.d/01_leds | 3 +
>
> .../mt7621/base-files/etc/board.d/02_network | 1 +
>
> .../etc/hotplug.d/ieee80211/10_fix_wifi_mac | 1 +
>
> .../mt7621/base-files/etc/init.d/bootcount | 1 +
>
> .../mt7621/base-files/lib/upgrade/platform.sh | 1 +
>
> 7 files changed, 212 insertions(+)
>
> create mode 100644 target/linux/ramips/dts/mt7621_linksys_e5600.dts
>
> diff --git a/target/linux/ramips/dts/mt7621_linksys_e5600.dts
> b/target/linux/ramips/dts/mt7621_linksys_e5600.dts
>
> new file mode 100644
>
> index 000000000000..91db315914e4
>
> --- /dev/null
>
> +++ b/target/linux/ramips/dts/mt7621_linksys_e5600.dts
>
> @@ -0,0 +1,182 @@
>
> +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
>
> +
>
> +#include "mt7621.dtsi"
>
> +
>
> +#include <dt-bindings/gpio/gpio.h>
>
> +#include <dt-bindings/input/input.h>
>
> +/ {
>
> - compatible = "linksys,e5600", "mediatek,mt7621-soc";
>
> - model = "Linksys E5600";
>
>
> - aliases {
>
> - led-boot = &led_power;
>
>
> - led-failsafe = &led_power;
>
>
> - led-running = &led_power;
>
>
> - led-upgrade = &led_power;
>
>
> - };
>
>
> - chosen {
>
> - bootargs = "console=ttyS0,115200";
>
>
> - };
>
>
> - keys {
>
> - compatible = "gpio-keys";
>
>
>
> - reset {
>
>
> - label = "reset";
>
>
> - gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
>
>
> - linux,code = <KEY_RESTART>;
>
>
> - };
>
>
>
> - wps {
>
>
> - label = "wps";
>
>
> - gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
>
>
> - linux,code = <KEY_WPS_BUTTON>;
>
>
> - };
>
>
> - };
>
>
> - leds {
>
> - compatible = "gpio-leds";
>
>
>
> - wps {
>
>
> - label = "amber:wps";
>
>
> - gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
>
>
> - };
>
>
>
> - led_power: power {
>
>
> - label = "blue:power";
>
>
> - gpios = <&gpio 10 GPIO_ACTIVE_HIGH>;
>
>
> - default-state = "on";
>
>
> - };
>
>
>
> - wan_amber {
>
>
> - label = "amber:wan";
>
>
> - gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
>
>
> - };
>
>
>
> - wan_blue {
>
>
> - label = "blue:wan";
>
>
> - gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
>
>
> - };
>
>
> - };
>
> +};
>
>
> +&nand {
>
> - status = "okay";
>
>
> - partitions {
>
> - compatible = "fixed-partitions";
>
>
> - #address-cells = <1>;
>
>
> - #size-cells = <1>;
>
>
>
> - partition@0 {
>
>
> - label = "boot";
>
>
> - reg = <0x0 0x80000>;
>
>
> - read-only;
>
>
> - };
>
>
>
> - partition@80000 {
>
>
> - label = "u_env";
>
>
> - reg = <0x80000 0x40000>;
>
>
> - read-only;
>
>
> - };
>
>
>
> - factory: partition@c0000 {
>
>
> - label = "factory";
>
>
> - reg = <0xc0000 0x40000>;
>
>
> - read-only;
>
>
> - };
>
>
>
> - partition@100000 {
>
>
> - label = "s_env";
>
>
> - reg = <0x100000 0x40000>;
>
>
> - };
>
>
>
> - partition@140000 {
>
>
> - label = "devinfo";
>
>
> - reg = <0x140000 0x40000>;
>
>
> - read-only;
>
>
> - };
>
>
>
> - partition@180000 {
>
>
> - label = "kernel";
>
>
> - reg = <0x180000 0x400000>;
>
>
> - };
>
>
>
> - partition@580000 {
>
>
> - label = "ubi";
>
>
> - reg = <0x580000 0x1a00000>;
>
>
> - };
>
>
>
> - partition@1f80000 {
>
>
> - label = "alt_firmware";
>
>
> - reg = <0x1f80000 0x1e00000>;
>
>
> - };
>
>
>
> - partition@3d80000 {
>
>
> - label = "gdata";
>
>
> - reg = <0x3d80000 0x4200000>;
>
>
> - };
>
>
> - };
>
> +};
>
>
> +&state_default {
>
> - gpio {
> - groups = "uart2", "uart3", "jtag";
>
>
> - function = "gpio";
>
>
> - };
>
> +};
>
> +&pcie {
>
> - status = "okay";
>
> +};
>
> +&pcie0 {
>
> - mt76@0,0 {
>
> - compatible = "mediatek,mt76";
>
>
> - reg = <0x0000 0 0 0 0>;
>
>
> - mediatek,mtd-eeprom = <&factory 0x0000>;
>
>
> - };
>
> +};
>
>
> +&pcie1 {
>
> - mt76@0,0 {
>
> - compatible = "mediatek,mt76";
>
>
> - reg = <0x0000 0 0 0 0>;
>
>
> - mediatek,mtd-eeprom = <&factory 0x8000>;
>
>
> - };
>
> +};
>
>
> +&switch0 {
>
> - ports {
> - port@0 {
>
>
> - status = "okay";
>
>
> - label = "lan1";
>
>
> - };
>
>
>
> - port@1 {
>
>
> - status = "okay";
>
>
> - label = "lan2";
>
>
> - };
>
>
>
> - port@2 {
>
>
> - status = "okay";
>
>
> - label = "lan3";
>
>
> - };
>
>
>
> - port@3 {
>
>
> - status = "okay";
>
>
> - label = "lan4";
>
>
> - };
>
>
>
> - port@4 {
>
>
> - status = "okay";
>
>
> - label = "wan";
>
>
> - };
>
>
> - };
>
> +};
>
> +&xhci {
>
> - status = "disabled";
>
> +};
>
> diff --git a/target/linux/ramips/image/mt7621.mk
> b/target/linux/ramips/image/mt7621.mk
>
> index 6edf6c0cd6a7..44170b4c1a30 100644
>
> --- a/target/linux/ramips/image/mt7621.mk
>
> +++ b/target/linux/ramips/image/mt7621.mk
>
> @@ -22,6 +22,10 @@ define Build/elecom-wrc-gs-factory
>
> mv $@.new $@
>
> endef
>
> +define Build/gemtek-trailer
> - printf "%s%08X" ".GEMTEK." "$$(cksum $@ | cut -d ' ' -f1)" >> $@
>
> +endef
>
> +
>
> define Build/iodata-factory
>
> $(eval fw_size=$(word 1,$(1)))
>
> $(eval fw_type=$(word 2,$(1)))
>
> @@ -762,6 +766,25 @@ define Device/lenovo_newifi-d1
>
> endef
>
> TARGET_DEVICES += lenovo_newifi-d1
>
> +define Device/linksys_e5600
>
> - $(Device/dsa-migration)
> - $(Device/uimage-lzma-loader)
> - BLOCKSIZE := 128k
> - PAGESIZE := 2048
> - KERNEL_SIZE := 4096k
> - IMAGE_SIZE := 26624k
> - DEVICE_VENDOR := Linksys
> - DEVICE_MODEL := E5600
> - DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap \
> - kmod-mt7663-firmware-sta uboot-envtools
> - UBINIZE_OPTS := -E 5
> - IMAGES += factory.bin
> - IMAGE/sysupgrade.bin := sysupgrade-tar | check-size | append-metadata
> - IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
> - append-ubi | check-size | gemtek-trailer
>
> +endef
>
> +TARGET_DEVICES += linksys_e5600
>
> define Device/linksys_ea7xxx
>
> $(Device/dsa-migration)
>
> $(Device/uimage-lzma-loader)
>
> diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
> b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
>
> index 2e280442bf1b..89a56dff2a48 100755
>
> --- a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
>
> +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
>
> @@ -47,6 +47,9 @@ gnubee,gb-pc2)
>
> ucidef_set_led_netdev "lan1" "lan1" "green:lan1" "lan1"
>
> ucidef_set_led_netdev "lan2" "lan2" "green:lan2" "lan2"
>
> ;;
>
> +linksys,e5600)
>
> - ucidef_set_led_netdev "wan" "wan link" "blue:wan" "wan" "link"
>
> - ;;
>
> linksys,ea7300-v1|\
>
> linksys,ea7300-v2|\
>
> linksys,ea7500-v2)
>
> diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
> b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
>
> index f5b075f1f4a8..40f1bfaecd58 100755
>
> --- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
>
> +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network
>
> @@ -128,6 +128,7 @@ ramips_setup_macs()
>
> zbtlink,zbt-wg3526-32m)
>
> label_mac=$(mtd_get_mac_binary factory 0x4)
>
> ;;
>
> - linksys,e5600|\
>
> linksys,ea7300-v1|\
>
> linksys,ea7300-v2|\
>
> linksys,ea7500-v2)
>
> diff --git
> a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
>
> b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
>
> index 427bde4e38f7..49b7f23ce914 100644
>
> ---
> a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
>
> +++
> b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
>
> @@ -18,6 +18,7 @@ case "$board" in
>
> [ "$PHYNBR" = "1" ] && \
>
> macaddr_setbit_la "$(mtd_get_mac_binary Factory 0x4)" >
> /sys${DEVPATH}/macaddress
>
> ;;
>
>
> - linksys,e5600|\
>
> linksys,ea7300-v1|\
>
> linksys,ea7300-v2|\
>
> linksys,ea7500-v2)
>
> diff --git a/target/linux/ramips/mt7621/base-files/etc/init.d/bootcount
> b/target/linux/ramips/mt7621/base-files/etc/init.d/bootcount
>
> index a155458d3f23..cfaa62485cea 100755
>
> --- a/target/linux/ramips/mt7621/base-files/etc/init.d/bootcount
>
> +++ b/target/linux/ramips/mt7621/base-files/etc/init.d/bootcount
>
> @@ -8,6 +8,7 @@ boot() {
>
> [ -n "$(fw_printenv bootcount bootchanged 2>/dev/null)" ] &&\
>
> echo -e "bootcount\\nbootchanged\\n" | /usr/sbin/fw_setenv -s -
> ;;
>
>
> - linksys,e5600|\
>
> linksys,ea7300-v1|\
>
> linksys,ea7300-v2|\
>
> linksys,ea7500-v2)
>
> diff --git
> a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
> b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
>
> index 98e429fdbf42..7b57ee7776c5 100755
>
> --- a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
>
> +++ b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh
>
> @@ -50,6 +50,7 @@ platform_do_upgrade() {
>
> dlink,dir-2660-a1|\
>
> hiwifi,hc5962|\
>
> jcg,q20|\
>
> - linksys,e5600|\
>
> linksys,ea7300-v1|\
>
> linksys,ea7300-v2|\
>
> linksys,ea7500-v2|\
>
--- End Message ---
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
