I am going to send a v3 patch with the redundant mtd-mac-address removed in a few minutes, hopefully in-reply-to this thread if I can manage to do it right.
On Thu, May 27, 2021 at 3:01 PM Adrian Schmutzler <m...@adrianschmutzler.de> wrote: > > Hi, > > > -----Original Message----- > > From: openwrt-devel [mailto:openwrt-devel-boun...@lists.openwrt.org] > > On Behalf Of Vincent Wiemann > > Sent: Sonntag, 23. Mai 2021 14:20 > > To: Russell Senior <russ...@personaltelco.net>; openwrt- > > de...@lists.openwrt.org > > Subject: Re: [PATCH v2] ath79: add support for Ubiquiti PowerBeam M (XW) > > > > Just as a side-note: > > There are 5 different versions of the PowerBeam with different device IDs... > > > > Source: > > https://github.com/freifunk-gluon/gluon/issues/94#issuecomment- > > 510831878 > > -- PowerBeam M5 > > -- ERP 26 dBm according to datasheet > > 'e3e5' = { -- PBE-M5-300 > > pa_gain = 4 > > ant_gain = 22 > > }, > > 'e4e5' = { -- PBE-M5-400 > > pa_gain = 4 > > ant_gain = 25 > > }, > > 'e6e5' = { -- PBE-M5-400 ISO!! > > pa_gain = 4 > > ant_gain = 25 > > }, > > 'e885' = { -- PBE-M5-620 > > pa_gain = 4 > > ant_gain = 29 > > }, > > > > -- Powerbeam M2 400? > > -- ERP 28 dBm according to datasheet > > 'e6c2' = { -- PBE-M2-400 > > pa_gain = 6 > > ant_gain = 18 dBi > > }, > > > > While I think there shouldn't be different DTS files for them, there is a > > script > > missing that respects the antenna and external PA gain of these devices. > > So far, we have not cared about this at device-support level (at all) as far > as I remember. > I'm not sure whether we apply antenna gain for ath79 Ubiquiti _at all_ by > default. (From what I remember we don't). > > So, I tend to not care about this for this particular PR. > > Best > > Adrian > > > > > Best, > > > > Vincent > > > > > > > > On 5/23/21 1:59 PM, Russell Senior wrote: > > > This patch adds support for the Ubiquiti PowerBeam M (XW), e.g. > > > PBE-M5-400, a 802.11n wireless with a feed+dish form factor. This > > > device was previously supported by the ar71xx loco-m-xw firmware. > > > > > > Specifications: > > > - Atheros AR9342 SoC > > > - 64 MB RAM > > > - 8 MB SPI flash > > > - 1x 10/100 Mbps Ethernet port, 24 Vdc PoE-in > > > - Power and LAN green LEDs > > > - 4x RSSI LEDs (red, orange, green, green) > > > - UART (115200 8N1) > > > > > > Flashing via stock GUI: > > > - WARNING: flashing OpenWrt from AirOS v5.6 or newer will brick your > > > device! Read the wiki for more info. > > > - Downgrade to AirOS v5.5.x (latest available is 5.5.10-u2) first. > > > - Upload the factory image via AirOS web GUI. > > > > > > Flashing via TFTP: > > > - WARNING: flashing OpenWrt from AirOS v5.6 or newer will brick your > > > device! Read the wiki for more info. > > > - Downgrade to AirOS v5.5.x (latest available is 5.5.10-u2) first. > > > - Use a pointy tool (e.g., unbent paperclip) to keep the > > > reset button pressed. > > > - Power on the device (keep reset button pressed). > > > - Keep pressing until LEDs flash alternatively LED1+LED3 => > > > LED2+LED4 => LED1+LED3, etc. > > > - Release reset button. > > > - The device starts a TFTP server at 192.168.1.20. > > > - Set a static IP on the computer (e.g., 192.168.1.21/24). > > > - Upload via tftp the factory image: > > > $ tftp 192.168.1.20 > > > tftp> bin > > > tftp> trace > > > tftp> put > > > openwrt-ath79-generic-xxxxx-ubnt_powerbeam-m-xw-squashfs- > > factory.bin > > > > > > WARNING: so far, no non-destructive method has been discovered for > > > opening the enclosure to reach the serial console. Internal photos are > > > available here: https://fcc.io/SWX-NBM5HP > > > > > > Changes since v1: > > > * renamed from ubnt,powerbeam-m to ubnt,powerbeam-m-xw > > > > > > Signed-off-by: Russell Senior <russ...@personaltelco.net> > > > --- > > > .../ath79/dts/ar9342_ubnt_powerbeam-m-xw.dts | 36 > > +++++++++++++++++++ > > > .../generic/base-files/etc/board.d/01_leds | 1 + > > > .../generic/base-files/etc/board.d/02_network | 1 + > > > target/linux/ath79/image/generic-ubnt.mk | 8 +++++ > > > 4 files changed, 46 insertions(+) > > > create mode 100644 > > > target/linux/ath79/dts/ar9342_ubnt_powerbeam-m-xw.dts > > > > > > diff --git a/target/linux/ath79/dts/ar9342_ubnt_powerbeam-m-xw.dts > > > b/target/linux/ath79/dts/ar9342_ubnt_powerbeam-m-xw.dts > > > new file mode 100644 > > > index 0000000000..edcb06acef > > > --- /dev/null > > > +++ b/target/linux/ath79/dts/ar9342_ubnt_powerbeam-m-xw.dts > > > @@ -0,0 +1,36 @@ > > > +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT > > > + > > > +#include "ar9342_ubnt_xw.dtsi" > > > + > > > +/ { > > > + compatible = "ubnt,powerbeam-m-xw", "ubnt,xw", "qca,ar9342"; > > > + model = "Ubiquiti PowerBeam M (XW)"; }; > > > + > > > +&mdio0 { > > > + status = "okay"; > > > + > > > + phy-mask = <4>; > > > + > > > + phy4: ethernet-phy@4 { > > > + reg = <4>; > > > + }; > > > +}; > > > + > > > +ð0 { > > > + status = "okay"; > > > + > > > + /* default for ar934x, except for 1000M and 10M */ > > > + pll-data = <0x02000000 0x00000101 0x00001313>; > > > + > > > + mtd-mac-address = <&art 0x0>; > > > + > > > + phy-mode = "rgmii-id"; > > > + phy-handle = <&phy4>; > > > + > > > + gmac-config { > > > + device = <&gmac>; > > > + rxd-delay = <3>; > > > + rxdv-delay = <3>; > > > + }; > > > +}; > > > diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds > > > b/target/linux/ath79/generic/base-files/etc/board.d/01_leds > > > index 1990353394..35ce90aeb4 100644 > > > --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds > > > +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds > > > @@ -383,6 +383,7 @@ ubnt,nanostation-loco-m-xw|\ > > > ubnt,nanostation-m|\ > > > ubnt,nanostation-m-xw|\ > > > ubnt,picostation-m|\ > > > +ubnt,powerbeam-m-xw|\ > > > ubnt,powerbridge-m|\ > > > ubnt,rocket-m) > > > ucidef_set_rssimon "wlan0" "200000" "1" > > > diff --git > > > a/target/linux/ath79/generic/base-files/etc/board.d/02_network > > > b/target/linux/ath79/generic/base-files/etc/board.d/02_network > > > index 4133b9d7d3..6e31cdac69 100644 > > > --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network > > > +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network > > > @@ -85,6 +85,7 @@ ath79_setup_interfaces() > > > ubnt,picostation-m|\ > > > ubnt,powerbeam-5ac-500|\ > > > ubnt,powerbeam-5ac-gen2|\ > > > + ubnt,powerbeam-m-xw|\ > > > ubnt,powerbridge-m|\ > > > ubnt,rocket-m|\ > > > ubnt,unifiac-lite|\ > > > diff --git a/target/linux/ath79/image/generic-ubnt.mk > > > b/target/linux/ath79/image/generic-ubnt.mk > > > index 733d803d7a..5948e059e8 100644 > > > --- a/target/linux/ath79/image/generic-ubnt.mk > > > +++ b/target/linux/ath79/image/generic-ubnt.mk > > > @@ -328,6 +328,14 @@ define Device/ubnt_powerbeam-5ac-gen2 > > > endef > > > TARGET_DEVICES += ubnt_powerbeam-5ac-gen2 > > > > > > +define Device/ubnt_powerbeam-m-xw > > > + $(Device/ubnt-xw) > > > + DEVICE_MODEL := PowerBeam M > > > + DEVICE_PACKAGES += rssileds > > > + SUPPORTED_DEVICES += loco-m-xw > > > +endef > > > +TARGET_DEVICES += ubnt_powerbeam-m-xw > > > + > > > define Device/ubnt_powerbridge-m > > > $(Device/ubnt-xm) > > > SOC := ar7241 > > > > > > > -- > > ************************************************* > > The information contained in this message and any attachments may be > > privileged, confidential, propietary, protected by copyright law or by any > > other means protected from disclosure and must therefore not be publicly > > disclosed without prior written consent. > > > > _o) Follow the penguin! > > //\ Vincent Wiemann <v...@derowe.com> > > V_/_ +49-511-582974 > > ************************************************* > > > > _______________________________________________ > > openwrt-devel mailing list > > openwrt-devel@lists.openwrt.org > > https://lists.openwrt.org/mailman/listinfo/openwrt-devel _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
