> Subject: [PATCH v2] ath79: add support for Ubiquiti PowerBeam M (XW) > Message-ID: <20210523115946.711907-1-russ...@personaltelco.net> > > This patch adds support for the Ubiquiti PowerBeam M (XW), e.g. PBE-M5-400, > a 802.11n wireless with a feed+dish form factor. This device was previously > supported by the ar71xx loco-m-xw firmware. > > Specifications: > - Atheros AR9342 SoC > - 64 MB RAM > - 8 MB SPI flash > - 1x 10/100 Mbps Ethernet port, 24 Vdc PoE-in > - Power and LAN green LEDs > - 4x RSSI LEDs (red, orange, green, green) > - UART (115200 8N1) > > Flashing via stock GUI: > - WARNING: flashing OpenWrt from AirOS v5.6 or newer will brick your
This was resolved by the following commit and has not been an issue for some time: https://github.com/openwrt/openwrt/commit/076d58d3440f382c536ea8874f58b0df23c263bc > device! Read the wiki for more info. > - Downgrade to AirOS v5.5.x (latest available is 5.5.10-u2) first. > - Upload the factory image via AirOS web GUI. > > Flashing via TFTP: > - WARNING: flashing OpenWrt from AirOS v5.6 or newer will brick your > device! Read the wiki for more info. > - Downgrade to AirOS v5.5.x (latest available is 5.5.10-u2) first. > - Use a pointy tool (e.g., unbent paperclip) to keep the > reset button pressed. > - Power on the device (keep reset button pressed). > - Keep pressing until LEDs flash alternatively LED1+LED3 => > LED2+LED4 => LED1+LED3, etc. > - Release reset button. > - The device starts a TFTP server at 192.168.1.20. > - Set a static IP on the computer (e.g., 192.168.1.21/24). > - Upload via tftp the factory image: > $ tftp 192.168.1.20 > tftp> bin > tftp> trace > tftp> put > openwrt-ath79-generic-xxxxx-ubnt_powerbeam-m-xw-squashfs-factory.bin > _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
