Hi, > -----Original Message----- > From: openwrt-devel [mailto:openwrt-devel-boun...@lists.openwrt.org] > On Behalf Of Russell Senior > Sent: Sonntag, 23. Mai 2021 07:24 > To: openwrt-devel@lists.openwrt.org > Cc: Russell Senior <russ...@personaltelco.net> > Subject: [PATCH] ath79: add support for Ubiquiti PowerBeam M (XW) > > This patch adds support for the Ubiquiti PowerBeam M (XW), e.g. PBE-M5- > 400, a 802.11n wireless with a feed+dish form factor. This device was > previously supported by the ar71xx loco-m-xw firmware.
this looks good in general. Somebody else should have a look at the network config, as this is the first non-wa ubnt device set up with rgmii-id. Apart from that, please use "ubnt-powerbeam-m-xw" for the compatible. This is in line with the other xw devices, and actually it would have been better for the xm devices as well in the first place, so I don't count "There is no 'xm' powerbeam" as an argument :-) Best Adrian > > Specifications: > - Atheros AR9342 SoC > - 64 MB RAM > - 8 MB SPI flash > - 1x 10/100 Mbps Ethernet port, 24 Vdc PoE-in > - Power and LAN green LEDs > - 4x RSSI LEDs (red, orange, green, green) > - UART (115200 8N1) > > Flashing via stock GUI: > - WARNING: flashing OpenWrt from AirOS v5.6 or newer will brick your > device! Read the wiki for more info. > - Downgrade to AirOS v5.5.x (latest available is 5.5.10-u2) first. > - Upload the factory image via AirOS web GUI. > > Flashing via TFTP: > - WARNING: flashing OpenWrt from AirOS v5.6 or newer will brick your > device! Read the wiki for more info. > - Downgrade to AirOS v5.5.x (latest available is 5.5.10-u2) first. > - Use a pointy tool (e.g., unbent paperclip) to keep the > reset button pressed. > - Power on the device (keep reset button pressed). > - Keep pressing until LEDs flash alternatively LED1+LED3 => > LED2+LED4 => LED1+LED3, etc. > - Release reset button. > - The device starts a TFTP server at 192.168.1.20. > - Set a static IP on the computer (e.g., 192.168.1.21/24). > - Upload via tftp the factory image: > $ tftp 192.168.1.20 > tftp> bin > tftp> trace > tftp> put openwrt-ath79-generic-xxxxx-ubnt_powerbeam-m-squashfs- > factory.bin > > WARNING: so far, no non-destructive method has been discovered for > opening the enclosure to reach the serial console. Internal photos are > available here: https://fcc.io/SWX-NBM5HP > > Signed-off-by: Russell Senior <russ...@personaltelco.net> > --- > .../ath79/dts/ar9342_ubnt_powerbeam-m.dts | 36 > +++++++++++++++++++ > .../generic/base-files/etc/board.d/01_leds | 1 + > .../generic/base-files/etc/board.d/02_network | 1 + > target/linux/ath79/image/generic-ubnt.mk | 8 +++++ > 4 files changed, 46 insertions(+) > create mode 100644 target/linux/ath79/dts/ar9342_ubnt_powerbeam- > m.dts > > diff --git a/target/linux/ath79/dts/ar9342_ubnt_powerbeam-m.dts > b/target/linux/ath79/dts/ar9342_ubnt_powerbeam-m.dts > new file mode 100644 > index 0000000000..1a2ce428f2 > --- /dev/null > +++ b/target/linux/ath79/dts/ar9342_ubnt_powerbeam-m.dts > @@ -0,0 +1,36 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT > + > +#include "ar9342_ubnt_xw.dtsi" > + > +/ { > + compatible = "ubnt,powerbeam-m", "ubnt,xw", "qca,ar9342"; > + model = "Ubiquiti PowerBeam M (XW)"; > +}; > + > +&mdio0 { > + status = "okay"; > + > + phy-mask = <4>; > + > + phy4: ethernet-phy@4 { > + reg = <4>; > + }; > +}; > + > +ð0 { > + status = "okay"; > + > + /* default for ar934x, except for 1000M and 10M */ > + pll-data = <0x02000000 0x00000101 0x00001313>; > + > + mtd-mac-address = <&art 0x0>; > + > + phy-mode = "rgmii-id"; > + phy-handle = <&phy4>; > + > + gmac-config { > + device = <&gmac>; > + rxd-delay = <3>; > + rxdv-delay = <3>; > + }; > +}; > diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds > b/target/linux/ath79/generic/base-files/etc/board.d/01_leds > index 1990353394..3bf120b92b 100644 > --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds > +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds > @@ -383,6 +383,7 @@ ubnt,nanostation-loco-m-xw|\ ubnt,nanostation- > m|\ ubnt,nanostation-m-xw|\ ubnt,picostation-m|\ > +ubnt,powerbeam-m|\ > ubnt,powerbridge-m|\ > ubnt,rocket-m) > ucidef_set_rssimon "wlan0" "200000" "1" > diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network > b/target/linux/ath79/generic/base-files/etc/board.d/02_network > index 4133b9d7d3..2b4ab946e1 100644 > --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network > +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network > @@ -85,6 +85,7 @@ ath79_setup_interfaces() > ubnt,picostation-m|\ > ubnt,powerbeam-5ac-500|\ > ubnt,powerbeam-5ac-gen2|\ > + ubnt,powerbeam-m|\ > ubnt,powerbridge-m|\ > ubnt,rocket-m|\ > ubnt,unifiac-lite|\ > diff --git a/target/linux/ath79/image/generic-ubnt.mk > b/target/linux/ath79/image/generic-ubnt.mk > index 733d803d7a..5f403984be 100644 > --- a/target/linux/ath79/image/generic-ubnt.mk > +++ b/target/linux/ath79/image/generic-ubnt.mk > @@ -328,6 +328,14 @@ define Device/ubnt_powerbeam-5ac-gen2 endef > TARGET_DEVICES += ubnt_powerbeam-5ac-gen2 > > +define Device/ubnt_powerbeam-m > + $(Device/ubnt-xw) > + DEVICE_MODEL := PowerBeam M > + DEVICE_PACKAGES += rssileds > + SUPPORTED_DEVICES += loco-m-xw > +endef > +TARGET_DEVICES += ubnt_powerbeam-m > + > define Device/ubnt_powerbridge-m > $(Device/ubnt-xm) > SOC := ar7241 > -- > 2.31.1 > > > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/mailman/listinfo/openwrt-devel
openpgp-digital-signature.asc
Description: PGP signature
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
