Building master (182eaa4916) with kernel 5.10 and booting, I get:
[...] [ 0.706515] spi-nor spi0.0: mx25l12805d (16384 Kbytes) [ 0.716193] spi-nor spi0.1: unrecognized JEDEC id bytes: 20 18 c2 20 18 c2 [ 0.723165] spi-nor: probe of spi0.1 failed with error -2 [ 0.730576] libphy: Fixed MDIO Bus: probed [ 0.737716] ag71xx 19000000.eth: invalid MAC address, using random address [ 1.062573] libphy: ag71xx_mdio: probed [ 1.069024] switch0: Atheros AR8316 rev. 1 switch registered on mdio.0 [ 1.077657] ag71xx 19000000.eth: connected to PHY at fixed-0:00 [uid=00000000, driver=Generic PHY] [ 1.087283] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: rgmii [ 1.093851] ag71xx 1a000000.eth: invalid MAC address, using random address [ 1.164292] random: fast init done [ 1.417471] ar8316: Using port 4 as PHY [ 2.470428] ag71xx 1a000000.eth: connected to PHY at mdio.0:04 [uid=004dd041, driver=Atheros AR8216/AR8236/AR8316] [ 2.481391] eth1: Atheros AG71xx at 0xba000000, irq 5, mode: rgmii [ 2.487813] i2c /dev entries driver [ 2.492936] NET: Registered protocol family 10 [ 2.502467] Segment Routing with IPv6 [ 2.506307] NET: Registered protocol family 17 [ 2.510841] 8021q: 802.1Q VLAN Support v1.8 [ 2.518597] /dev/root: Can't open blockdev [ 2.522754] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6 [ 2.530242] Please append a correct "root=" boot option; here are the available partitions: [ 2.538600] 1f00 16384 mtdblock0 [ 2.538604] (driver?) [ 2.545140] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 2.553386] Rebooting in 1 seconds.. Reverting 2683eeb627 lets it work again. -- Russell Senior, President russ...@personaltelco.net _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
