On Wed, Feb 24, 2021 at 09:10:39PM +0200, Oskari Lemmela wrote: > bananapi r64 uses mediatek,mt753x gsw switch device. > configure network defaults accordingly. > > Signed-off-by: Oskari Lemmela <osk...@lemmela.net> > --- > target/linux/mediatek/image/mt7622.mk | 6 ++++-- > .../linux/mediatek/mt7622/base-files/etc/board.d/02_network | 3 ++- > 2 files changed, 6 insertions(+), 3 deletions(-) > > diff --git a/target/linux/mediatek/image/mt7622.mk > b/target/linux/mediatek/image/mt7622.mk > index 1d1c2f8a80..50d319ba5c 100644 > --- a/target/linux/mediatek/image/mt7622.mk > +++ b/target/linux/mediatek/image/mt7622.mk > @@ -6,7 +6,8 @@ define Device/bpi_bananapi-r64 > DEVICE_MODEL := Banana Pi R64 > DEVICE_DTS := mt7622-bananapi-bpi-r64 > SUPPORTED_DEVICES := bananapi,bpi-r64 > - DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-usb3 kmod-ata-ahci-mtk > + DEVICE_PACKAGES := kmod-usb-ohci kmod-usb2 kmod-usb3 kmod-ata-ahci-mtk \ > + swconfig
This will be obsolete with 5.10 and using DSA where the previous defaults are just fine. Let's not introduce swconfig now just to drop it again in a few days when Linux 5.10 support will be in openwrt.git as well. The other 4 patches look good, I'll merge them after a round of testing. > endef > TARGET_DEVICES += bpi_bananapi-r64 > > @@ -17,7 +18,8 @@ define Device/bpi_bananapi-r64-rootdisk > DEVICE_DTS_DIR := ../dts > SUPPORTED_DEVICES := bananapi,bpi-r64 > DEVICE_PACKAGES := kmod-fs-vfat kmod-nls-cp437 kmod-nls-iso8859-1 \ > - mkf2fs e2fsprogs kmod-usb-ohci kmod-usb2 kmod-usb3 kmod-ata-ahci-mtk > + mkf2fs e2fsprogs kmod-usb-ohci kmod-usb2 kmod-usb3 kmod-ata-ahci-mtk \ > + swconfig > IMAGES := sysupgrade-emmc.bin.gz > IMAGE/sysupgrade-emmc.bin.gz := sysupgrade-emmc | gzip | append-metadata > endef > diff --git a/target/linux/mediatek/mt7622/base-files/etc/board.d/02_network > b/target/linux/mediatek/mt7622/base-files/etc/board.d/02_network > index 3a409c8ec9..88a22dfb74 100755 > --- a/target/linux/mediatek/mt7622/base-files/etc/board.d/02_network > +++ b/target/linux/mediatek/mt7622/base-files/etc/board.d/02_network > @@ -11,7 +11,8 @@ mediatek_setup_interfaces() > case $board in > bananapi,bpi-r64-rootdisk|\ > bananapi,bpi-r64) > - ucidef_set_interfaces_lan_wan "lan0 lan1 lan2 lan3" wan > + ucidef_add_switch "switch0" \ > + "1:lan" "2:lan" "3:lan" "4:lan" "6u@eth0" > "0:wan" "5u@eth1" > ;; > mediatek,mt7622-rfb1) > ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" wan > -- > 2.25.1 > > > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/mailman/listinfo/openwrt-devel _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
