Hi, The OpenWrt community is proud to announce the seventh service release of OpenWrt 19.07. It fixes security issues, improves device support, and brings a few bug fixes.
The main changes from OpenWrt 19.07.6 are: Security fixes ============== * Security Advisory 2021-02-02-1 - netifd and odhcp6c routing loop on IPv6 point to point links (CVE-2021-22161) * Security Advisory 2021-02-02-2 - wolfSSL heap buffer overflow in RsaPad_PSS (CVE-2020-36177) Major bug fixes =============== * Fix dnsmasq error messages such as "failed to send packet: Network unreachable" or "failed to send packet: Address family not supported by protocol" that could be filling up logs. This was a regression caused by the dnsmasq update in 19.07.6. * Fix opkg so that it purges obsolete packages from its local cache. This fixes a long-standing issue in the ImageBuilder where a manual cleanup was needed before rebuilding. Device support ============== * Improve stability of mediatek Ethernet switch (affects many mt7621 devices) * Fix Wi-Fi band detection on some Broadcom-based devices * Fix poor 2.4 GHz Wi-Fi performance on TP-Link Archer C50 v4 due to a missing EEPROM chip ID * Make initramfs image usable out-of-the-box on Turris Omnia * Use full flash size on Nucom R5010UN v2 * Fix support for TP-Link TL-WR810N v1 in ath79 * Remove broken factory image for TP-Link Archer C2 v1 * Fix unintended failsafe mode during boot on Netgear EX6150 Various fixes and improvements ============================== * The ImageBuilder no longer requires compilers (gcc, g++) and libncurses-dev. This was partially implemented in 19.07.6 but one part was missing to make it actually work. * Update to a new major version of ksmbd to fix several bugs. This breaks compatibility with previous versions of OpenWrt (19.07.0 to 19.07.6): it is no longer possible to install a working version of ksmbd-tools on previous versions of OpenWrt. Existing installations will keep working, but ksmbd-tools should not be upgraded with opkg. Unfortunately, this ksmbd update introduced a regression: the kernel module package for ksmbd depends on the non-existant kmod-crypto-arc4. If you are affected by this issue, see https://openwrt.org/releases/19.07/notes-19.07.7#regressions for a workaround. LuCI web interface ================== * Fix array sorting on Chrome * Add nextdns.io and quad 101 providers to luci-app-https-dns-proxy package Core components =============== * Update Linux kernel from 4.14.215 to 4.14.221 * Update wolfssl from 4.5.0 to 4.6.0 Full release notes and upgrade instructions are available at https://openwrt.org/releases/19.07/notes-19.07.7 In particular, make sure to read the regressions and known issues before upgrading: https://openwrt.org/releases/19.07/notes-19.07.7#regressions For a very detailed list of all changes since 19.07.6, refer to https://openwrt.org/releases/19.07/changelog-19.07.7 For latest information about the 19.07 series, refer to the wiki at: https://openwrt.org/releases/19.07/ To download a OpenWrt 19.07.7 firmware image for your device, head to the Table of Hardware: https://openwrt.org/toh/start Or use the new firmware selector: https://firmware-selector.openwrt.org/ You can also navigate directly in the list of firmware images: https://downloads.openwrt.org/releases/19.07.6/targets/ As always, a big thank you goes to all our active package maintainers, testers, documenters, and supporters. Have fun! The OpenWrt Community --- To stay informed of new OpenWrt releases and security advisories, there are new channels available: * a low-volume mailing list for important announcements: https://lists.openwrt.org/mailman/listinfo/openwrt-announce * a dedicated "announcements" section in the forum: https://forum.openwrt.org/c/announcements/14 * other announcement channels (such as RSS feeds) might be added in the future, they will be listed at https://openwrt.org/contact
signature.asc
Description: PGP signature
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
