Hello,
Thank you for your comments, they are very much appreciated!
On 12/24/20 04:09, Chuanhong Guo wrote:
Hi!
On Thu, Dec 24, 2020 at 12:51 AM Rafaël Carré <fun...@videolan.org> wrote:
Add Linksys WAP300N target
+ ethernet: ethernet@50000{
+ compatible = "ralink,rt6855-eth";
This doesn't match your compatible string choice in the ethernet driver.
Indeed.
As I said in an earlier mail, I did not find yet how the OpenWrt .dts
takes precedence over the in-tree one.
All the needed declarations are in the in-tree .dts, including
OpenWrt-specific ones.
I will look at this before sending another patch.
diff --git a/target/linux/ramips/dts/rt6855a_linksys_wap300n.dts
b/target/linux/ramips/dts/rt6855a_linksys_wap300n.dts
new file mode 100644
index 0000000000..d923946c4a
--- /dev/null
+++ b/target/linux/ramips/dts/rt6855a_linksys_wap300n.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+/include/ "rt6855.dtsi"
+
+/ {
+ compatible = "ralink,rt6855-soc";
+ model = "Linksys WAP300n";
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x20000 0x3fe0000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ };
+};
Seems incomplete?
It's quite possible some things need to move from rt6855a.dtsi into this
file. Will look at this as well.
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
