Hi,
I planned to refresh the support of a rt305x SunValley Filehub device: HooToo HT-TM02. I wanted to follow Adrian's and Russel's work for HooToo HT-TM05 and RAVPower RP-WD03 in mt7620 [0]. I toought disabling the image generation would be easy, as binwalk showed an oversized kernel: "image size: 1624829 bytes", so it won't boot anyway. DECIMAL HEXADECIMAL DESCRIPTION -------------------------------------------------------------------------------- 0 0x0 uImage header, header size: 64 bytes, header CRC: 0xCB63E9C7, created: 2020-12-06 08:18:07, image size: 1624829 bytes, Data Address: 0x80000000, Entry Point: 0x80000000, data CRC: 0x10379393, OS: Linux, CPU: MIPS, image type: OS Kernel Image, compression type: lzma, image name: "MIPS OpenWrt Linux-5.4.81" 64 0x40 LZMA compressed data, properties: 0x6D, dictionary size: 8388608 bytes, uncompressed size: 5182719 bytes 549311 0x861BF Cisco IOS microcode, for "" But I was unable to verify this because of the following: - wingspinner's uboot [1],[2],[3] reads successfully the whole kernel, but throws "LZMA ERROR 1 - must RESET board to recover" - which is maybe fixable by $(Device/uimage-lzma-loader) - original u-boot loads and boots nicely the oversized kernel And all compatible rt305x devices (HT-TM02, HT-TM01, RP-WD02 and maybe RP-WD01) uses wingspinner's image, as it is installable through the OEM web interface. And it comes with he's custom uboot. What should I write in the commit description now? My plans on refreshing have bad times too as the OKLI Loader is unable to find the "OKLI" magic as the device doesn't map the flash to any memory address. While David ported official U-Boot to ramips target already with the RAVPower RP-WD009 support, I'm little bit afraid of my success porting it to rt305x as U-Boot doesn't have "rt5350.dtsi" to start with. May I ask for help not just for commit description but for creating a second stage loader for ramips/rt305x too? Thanks, Szabolcs [0]: https://git.openwrt.org/?p=openwrt/openwrt.git;a=log;h=c4110a524e9a026cf570b6dadf325c037b7527d0 [1]: https://openwrt.org/toh/hootoo/tripmate-nano#supported_versions [2]: https://forum.archive.openwrt.org/viewtopic.php?id=53014 [3]: https://github.com/wingspinner/HooToo-Tripmate-HT-TM02-OpenWRT/tree/master/uboot _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
