> -----Original Message----- > From: openwrt-devel [mailto:openwrt-devel-boun...@lists.openwrt.org] > On Behalf Of Alexandra Alth > Sent: Freitag, 4. Dezember 2020 13:59 > To: Tomasz Maciej Nowak <tmn...@gmail.com> > Cc: openwrt-devel@lists.openwrt.org > Subject: Re: [PATCH] mvebu: macchiatobin-singleshot: enable heartbeat LED > > Is this now approved and integrated in the nightly? tnx alexandra
Did anyone say so? > > > Am 25.11.2020 um 17:53 schrieb Tomasz Maciej Nowak > <tmn...@gmail.com>: > > > > With board revision 1.3, SolidRun moved the power LED to the middle of > > the board. In old place of power LED a GPIO controllable heartbeat LED > > was added. This commit touches only Single Shot variant, because all > > have revision 1.3. Some boards could be placed in an enclosure, > > therefore the LED0 is enabled by default, since that'll be the only > > visible indicator that the board is operating. > > > > Ref: > > http://wiki.macchiatobin.net/tiki-index.php?page=Schematics#Revision1. > > 3_Electrical_Design_Changes > > Ref: > > http://macchiatobin.net/wp-content/uploads/2017/11/MACCHIATOBin- > rev-1_ > > 3.pdf > > > > Reported-by: Alexandra Alth <alexan...@alth.de> > > Signed-off-by: Tomasz Maciej Nowak <tmn...@gmail.com> > > --- > > target/linux/mvebu/image/cortexa72.mk | 2 +- > > ...s-mcbin-singleshot-add-heartbeat-LED.patch | 59 > +++++++++++++++++++ > > 2 files changed, 60 insertions(+), 1 deletion(-) create mode 100644 > > target/linux/mvebu/patches-5.4/100-arm64-dts-mcbin-singleshot-add- > hear > > tbeat-LED.patch > > > > diff --git a/target/linux/mvebu/image/cortexa72.mk > > b/target/linux/mvebu/image/cortexa72.mk > > index 1440c07a0b5f..8bd4581766c2 100644 > > --- a/target/linux/mvebu/image/cortexa72.mk > > +++ b/target/linux/mvebu/image/cortexa72.mk > > @@ -38,7 +38,7 @@ define Device/marvell_macchiatobin-singleshot > > DEVICE_ALT0_VENDOR := SolidRun > > DEVICE_ALT0_MODEL := Armada 8040 Community Board > > DEVICE_ALT0_VARIANT := Single Shot > > - DEVICE_PACKAGES += kmod-i2c-mux-pca954x > > + DEVICE_PACKAGES += kmod-i2c-mux-pca954x kmod-ledtrig-heartbeat > > DEVICE_DTS := armada-8040-mcbin-singleshot > > SUPPORTED_DEVICES := marvell,armada8040-mcbin-singleshot > > endef > > diff --git > > a/target/linux/mvebu/patches-5.4/100-arm64-dts-mcbin-singleshot-add- > he > > artbeat-LED.patch > > b/target/linux/mvebu/patches-5.4/100-arm64-dts-mcbin-singleshot-add- > he > > artbeat-LED.patch > > new file mode 100644 > > index 000000000000..a5f37461360b > > --- /dev/null > > +++ b/target/linux/mvebu/patches-5.4/100-arm64-dts-mcbin-singleshot- > ad > > +++ d-heartbeat-LED.patch > > @@ -0,0 +1,59 @@ > > +From 310b7883b64993da355ad5cc3e45f515ac2bef2f Mon Sep 17 00:00:00 > > +2001 > > +From: Tomasz Maciej Nowak <tmn...@gmail.com> > > +Date: Sat, 17 Oct 2020 16:53:20 +0200 > > +Subject: [PATCH] arm64: dts: mcbin-singleshot: add heartbeat LED > > + > > +With board revision 1.3, SolidRun moved the power LED to the middle > > +of the board. In old place of power LED a GPIO controllable heartbeat > > +LED was added. This commit only touches Single Shot variant, since > > +only this variant is all revision 1.3. > > + > > +Reported-by: Alexandra Alth <alexan...@alth.de> > > +Signed-off-by: Tomasz Maciej Nowak <tmn...@gmail.com> > > +--- > > + .../marvell/armada-8040-mcbin-singleshot.dts | 22 > > ++++++++++++++++++++ > > + 1 file changed, 22 insertions(+) > > + > > +--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts > > ++++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts > > +@@ -5,6 +5,8 @@ > > + * Device Tree file for MACCHIATOBin Armada 8040 community board > > +platform > > + */ > > + > > ++#include <dt-bindings/leds/common.h> > > ++ > > + #include "armada-8040-mcbin.dtsi" > > + > > + / { > > +@@ -12,6 +14,20 @@ > > + compatible = "marvell,armada8040-mcbin-singleshot", > > + "marvell,armada8040-mcbin", "marvell,armada8040", > > + "marvell,armada-ap806-quad", "marvell,armada- > ap806"; > > ++ > > ++ leds { > > ++ compatible = "gpio-leds"; > > ++ pinctrl-0 = <&cp0_led18_pins>; > > ++ pinctrl-names = "default"; > > ++ > > ++ led18 { > > ++ gpios = <&cp0_gpio2 1 GPIO_ACTIVE_LOW>; > > ++ function = LED_FUNCTION_HEARTBEAT; > > ++ color = <LED_COLOR_ID_GREEN>; > > ++ linux,default-trigger = "heartbeat"; > > ++ default-state = "on"; > > ++ }; > > ++ }; > > + }; > > + > > + &cp0_eth0 { > > +@@ -27,3 +43,10 @@ > > + managed = "in-band-status"; > > + sfp = <&sfp_eth1>; > > + }; > > ++ > > ++&cp0_pinctrl { > > ++ cp0_led18_pins: led18-pins { > > ++ marvell,pins = "mpp33"; > > ++ marvell,function = "gpio"; > > ++ }; > > ++}; > > -- > > 2.29.2 > > > > > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/mailman/listinfo/openwrt-devel
openpgp-digital-signature.asc
Description: PGP signature
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
