Felix Fietkau <n...@nbd.name> wrote:
> On 2020-10-29 13:11, Koen Vandeputte wrote:
> >
> > On 29.10.20 11:37, Andrey Jr. Melnikov wrote:
> >> Koen Vandeputte <koen.vandepu...@ncentric.com> wrote:
> >>
> >>> On 03.10.20 17:11, Vincent Wiemann wrote:
> >>>> Hi folks,
> >>>>
> >>>> is anybody working on 5.9, already?
> >>>> I'd like to do some testing with io_uring on ath79 devices,
> >>>> but the features needed require a version > 5.7.
> >>>> Please let me know!
> >>> Not yet currently as I'm pretty occupied with AI stuff, but I might give
> >>> it a try within 1 .. 2 weeks.
> >> before you start - in 5.8 kernel build process slightly changed, so openwrt
> >> "build module first, kernel last" not working, vmlinux must be build before
> >> modules now.
> >> mtd subsystem partition code massive changed - mtdsplit drivers need
> >> rewrite.
> >
> > Thanks,
> >
> > I'll take a look at it.
> > I did encounter the mtdsplit stuff you mention.
> >
> > Just swapped to 5.10-rc1 as it will be the next LTS.
> I have 5.9 working on the mediatek target in my staging tree:
> https://git.openwrt.org/?p=openwrt/staging/nbd.git;a=summary
patch target/linux/generic/pending-5.9/306-mips_mem_functions_performance.patch
cause this:
--- cut ---
In file included from ./include/linux/string.h:20,
from ./include/linux/uuid.h:12,
from ./include/linux/mod_devicetable.h:13,
from scripts/mod/devicetable-offsets.c:3:
./arch/mips/include/asm/string.h:24:2: error: expected identifier or '(' before
'{' token
24 | ({ \
| ^
./include/linux/string.h:384:24: note: in expansion of macro 'memset'
384 | __FORTIFY_INLINE void *memset(void *p, int c, __kernel_size_t size)
| ^~~~~~
./arch/mips/include/asm/string.h:35:2: error: expected identifier or '(' before
'{' token
35 | ({ \
| ^
./include/linux/string.h:394:24: note: in expansion of macro 'memcpy'
394 | __FORTIFY_INLINE void *memcpy(void *p, const void *q, __kernel_size_t
size)
| ^~~~~~
./arch/mips/include/asm/string.h:46:2: error: expected identifier or '(' before
'{' token
46 | ({ \
| ^
./include/linux/string.h:409:24: note: in expansion of macro 'memmove'
409 | __FORTIFY_INLINE void *memmove(void *p, const void *q, __kernel_size_t
size)
| ^~~~~~~
./arch/mips/include/asm/string.h:57:50: error: expected declaration specifiers
or '...' before '(' token
57 | #define memcmp(src1, src2, len) __builtin_memcmp((src1), (src2), (len))
| ^
./include/linux/string.h:435:22: note: in expansion of macro 'memcmp'
435 | __FORTIFY_INLINE int memcmp(const void *p, const void *q,
__kernel_size_t size)
| ^~~~~~
./arch/mips/include/asm/string.h:57:58: error: expected declaration specifiers
or '...' before '(' token
57 | #define memcmp(src1, src2, len) __builtin_memcmp((src1), (src2), (len))
| ^
./include/linux/string.h:435:22: note: in expansion of macro 'memcmp'
435 | __FORTIFY_INLINE int memcmp(const void *p, const void *q,
__kernel_size_t size)
| ^~~~~~
./arch/mips/include/asm/string.h:57:66: error: expected declaration specifiers
or '...' before '(' token
57 | #define memcmp(src1, src2, len) __builtin_memcmp((src1), (src2), (len))
| ^
./include/linux/string.h:435:22: note: in expansion of macro 'memcmp'
435 | __FORTIFY_INLINE int memcmp(const void *p, const void *q,
__kernel_size_t size)
| ^~~~~~
--- cut ---
Dropping this patch, adjusting mtk7621 nand driver and it success boot on
mt7621.
And yes, DSA interfaces come up faster:
--- 5.8.16 ---
[ 23.378250] mtk_soc_eth 1e100000.ethernet eth0: Link is Down
[ 23.394552] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii
link mode
[ 23.403086] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full -
flow control rx/tx
[ 23.412139] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 23.423265] device eth0 entered promiscuous mode
[ 23.600168] mt7530 mdio-bus:1f lan1: configuring for phy/gmii link mode
[ 23.650656] 8021q: adding VLAN 0 to HW filter on device lan1
[ 24.460634] br-lan: port 1(lan1) entered blocking state
[ 24.465865] br-lan: port 1(lan1) entered disabled state
[ 24.530026] device lan1 entered promiscuous mode
[ 25.670004] mt7530 mdio-bus:1f lan2: configuring for phy/gmii link mode
[ 25.740319] 8021q: adding VLAN 0 to HW filter on device lan2
[ 26.610853] br-lan: port 2(lan2) entered blocking state
[ 26.616128] br-lan: port 2(lan2) entered disabled state
[ 26.740081] device lan2 entered promiscuous mode
[ 27.750001] mt7530 mdio-bus:1f lan3: configuring for phy/gmii link mode
[ 27.860316] 8021q: adding VLAN 0 to HW filter on device lan3
[ 28.870141] br-lan: port 3(lan3) entered blocking state
[ 28.875367] br-lan: port 3(lan3) entered disabled state
[ 29.060023] device lan3 entered promiscuous mode
[ 30.289991] mt7530 mdio-bus:1f lan4: configuring for phy/gmii link mode
[ 30.380314] 8021q: adding VLAN 0 to HW filter on device lan4
[ 31.300600] br-lan: port 4(lan4) entered blocking state
[ 31.305821] br-lan: port 4(lan4) entered disabled state
[ 31.580013] device lan4 entered promiscuous mode
[ 32.820014] mt7530 mdio-bus:1f lan0: configuring for phy/gmii link mode
[ 32.950310] 8021q: adding VLAN 0 to HW filter on device lan0
[ 35.820007] mt7530 mdio-bus:1f lan0: Link is Up - 1Gbps/Full - flow control
off
[ 35.827350] IPv6: ADDRCONF(NETDEV_CHANGE): lan0: link becomes ready
--- 5.9.1 ---
[ 36.410583] mtk_soc_eth 1e100000.ethernet eth0: Link is Down
[ 36.417543] mtk_soc_eth 1e100000.ethernet: PPE table busy
[ 36.442444] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii
link mode
[ 36.450958] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full -
flow control rx/tx
[ 36.459831] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 36.469886] device eth0 entered promiscuous mode
[ 36.475362] mt7530 mdio-bus:1f lan1: configuring for phy/gmii link mode
[ 36.482770] 8021q: adding VLAN 0 to HW filter on device lan1
[ 36.492117] br-lan: port 1(lan1) entered blocking state
[ 36.497483] br-lan: port 1(lan1) entered disabled state
[ 36.504203] device lan1 entered promiscuous mode
[ 36.538089] mt7530 mdio-bus:1f lan2: configuring for phy/gmii link mode
[ 36.545568] 8021q: adding VLAN 0 to HW filter on device lan2
[ 36.554971] br-lan: port 2(lan2) entered blocking state
[ 36.560304] br-lan: port 2(lan2) entered disabled state
[ 36.567270] device lan2 entered promiscuous mode
[ 36.583029] mt7530 mdio-bus:1f lan3: configuring for phy/gmii link mode
[ 36.590376] 8021q: adding VLAN 0 to HW filter on device lan3
[ 36.599536] br-lan: port 3(lan3) entered blocking state
[ 36.604799] br-lan: port 3(lan3) entered disabled state
[ 36.611677] device lan3 entered promiscuous mode
[ 36.629413] mt7530 mdio-bus:1f lan4: configuring for phy/gmii link mode
[ 36.637127] 8021q: adding VLAN 0 to HW filter on device lan4
[ 36.647103] br-lan: port 4(lan4) entered blocking state
[ 36.652481] br-lan: port 4(lan4) entered disabled state
[ 36.659662] device lan4 entered promiscuous mode
[ 36.687630] mt7530 mdio-bus:1f lan0: configuring for phy/gmii link mode
[ 36.695271] 8021q: adding VLAN 0 to HW filter on device lan0
[ 39.782183] mt7530 mdio-bus:1f lan0: Link is Up - 1Gbps/Full - flow control
off
[ 39.789556] IPv6: ADDRCONF(NETDEV_CHANGE): lan0: link becomes ready
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
