Hi! On Tue, Sep 29, 2020 at 2:00 AM Todor Colov <todorco...@abv.bg> wrote: > --- a/target/linux/ipq806x/image/Makefile > +++ b/target/linux/ipq806x/image/Makefile > @@ -13,6 +13,17 @@ define Build/buffalo-rootfs-cksum > ) >> $@ > endef > > +# tune addpattern for Linksys E8350-V1 fw pattern generation > +define Build/linksys-bin > + $(STAGING_DIR_HOST)/bin/addpattern -p $(FW_DEVICE_ID) -v > $(FW_VERSION) $(if $(SERIAL),-s $(SERIAL)) -i $@ -o $@.new > + mv $@.new $@ > +endef > +# Use Linksys fw header generator to upgrade openwrt factory image over the > native Linksys WEB interface > +define Build/linksys-addfwhdr > + -$(STAGING_DIR_HOST)/bin/addfwhdr -i $@ -o $@.new \ > + ;mv "$@.new" "$@" > +endef > + > define Device/Default > PROFILES := Default > KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts) > @@ -122,6 +133,24 @@ define Device/edgecore_ecw5410 > endef > TARGET_DEVICES += edgecore_ecw5410 > > +define Device/linksys_e8350-v1 > + $(call Device/LegacyImage) > + DEVICE_VENDOR := Linksys > + DEVICE_MODEL := E8350 > + DEVICE_VARIANT := v1 > + SOC := qcom-ipq8064 > + FW_VERSION := v1.0.03.003 > + FW_DEVICE_ID := 8350 > + PAGESIZE := 2048 > + BLOCKSIZE := 128k > + KERNEL_IN_UBI := 1 > + IMAGES = factory.bin sysupgrade.ubi > + IMAGE/sysupgrade.ubi := append-ubi | check-size 0x04000000 | > append-metadata
Could you try the tar sysupgrade package instead? Replace this line with: IMAGE/sysupgrade.bin = sysupgrade-tar | append-metadata The resulting sysupgrade.bin should work without other changes. When ubi image is used for sysupgrade, the entire ubi partition is reformatted, which is suboptimal. -- Regards, Chuanhong Guo _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
