> > > On 19/09/2020 15:06, Paul Oranje wrote: > > See below, regards, > > Paul > > > > > >> Op 15 sep. 2020, om 21:56 heeft jacekow...@jacekowski.org het volgende > >> geschreven: > > The subject does not to comply with the rules for that, it should at least > > start with the target, better would be: > > ipq806x: fix tx-queue-size on NBG6817 > > I was not aware of that. > > >> From: Jacek Milewicz <jacekow...@jacekowski.org> > >> > >> Fixes FS#3285 for NBG6817 only. > > Why is that ? > > Because on IPQ806x SoC it is impossible to detect correct value, > therefore it has to be set for each device in device tree (which is what > this patch is doing). > > On most IPQ806x devices correct value has to be determined manually by > trying few most common values and seeing what works (4k seems to be most > common). >
Can I ask you how you found out and how to check if a bad value is set? Is this set by default on the OEM firmware? Any test or something? _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
