Based on the commit of Santiago Rodruquez-Papa, for a Linksys EA7300 V1, I purchased a factory recertified EA7300 - version was not advertised. On arrival, it was a version 2.
I researched and V2 is almost the same as V1 except it has 7603/7615 radios instead of a pair of 7615s. The memory/flash is the same size but from different manufactures. I posted the details, with wikidevi links, and the modifications I made to the code in the OpenWrt forum. It built fine but I'm looking for some reassurance before flashing. I understand the case is difficult to pry open and I'd like to avoid the possibility of soldering/serial console. Any comments or suggestions appreciated. If it works, I intend to submit a patch. Also have a question on the description. I could copy/paste Santiago's description with 4 small edits or link/reference his work with a shorter description of the differences. I expect the lengthy install procedure to be the same and will confirm prior to submission. https://forum.openwrt.org/t/add-support-for-linksys-ea7300-v2/74563 Thanks -- J. Scott Heppler _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
