From: Ataberk Özen <ataberkozen...@gmail.com>
This commit adds support for Xiaomi's Mi Router 4C device.
Specifications:
- CPU: MediaTek MT7628AN (580MHz)
- Flash: 16MB
- RAM: 64MB DDR2
- 2.4 GHz: IEEE 802.11b/g/n with Integrated LNA and PA
- Antennas: 4x external single band antennas
- WAN: 1x 10/100M
- LAN: 2x 10/100M
- LEDs: 2x yellow/blue. Programmable (labelled as power on case) -
Non-programmable (shows WAN activity)
- Button: Reset
How to install:
1- Use OpenWRTInvasion to gain telnet and ftp access.
2- Push openwrt firmware to /tmp/ using ftp.
3- Connect to router using telnet. (IP: 192.168.31.1 - Username: root - No
password)
4- Use command "mtd -r write /tmp/firmware.bin OS1" to flash into the router..
5- It takes around 2 minutes. After that router will restart itself to OpenWrt.
Signed-off-by: Ataberk Özen <ataberkozen...@gmail.com>
---
package/boot/uboot-envtools/files/ramips | 1 +
.../ramips/dts/mt7628an_xiaomi_mi-router-4c.dts | 134 +++++++++++++++++++++
target/linux/ramips/image/mt76x8.mk | 8 ++
.../mt76x8/base-files/etc/board.d/02_network | 5 +
.../ramips/mt76x8/base-files/etc/init.d/bootcount | 1 +
5 files changed, 149 insertions(+)
create mode 100644 target/linux/ramips/dts/mt7628an_xiaomi_mi-router-4c.dts
diff --git a/package/boot/uboot-envtools/files/ramips
b/package/boot/uboot-envtools/files/ramips
index 80a91f0..18edc5a 100644
--- a/package/boot/uboot-envtools/files/ramips
+++ b/package/boot/uboot-envtools/files/ramips
@@ -29,6 +29,7 @@ buffalo,wsr-1166dhp|\
buffalo,wsr-600dhp|\
mediatek,linkit-smart-7688|\
samknows,whitebox-v8|\
+xiaomi,mi-router-4c|\
xiaomi,miwifi-nano|\
zbtlink,zbt-wg2626)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x1000" "0x10000"
diff --git a/target/linux/ramips/dts/mt7628an_xiaomi_mi-router-4c.dts
b/target/linux/ramips/dts/mt7628an_xiaomi_mi-router-4c.dts
new file mode 100644
index 0000000..0ff88fe
--- /dev/null
+++ b/target/linux/ramips/dts/mt7628an_xiaomi_mi-router-4c.dts
@@ -0,0 +1,134 @@
+//SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "mt7628an.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "xiaomi,mi-router-4c", "mediatek,mt7628an-soc";
+ model = "Xiaomi Mi Router 4C";
+
+ aliases {
+ led-boot = &led_power_yellow;
+ led-failsafe = &led_power_yellow;
+ led-running = &led_power_blue;
+ led-upgrade = &led_power_yellow;
+ label-mac-device = ðernet;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power_blue: power_blue {
+ label = "mi-router-4c:blue:power";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_yellow: power_yellow {
+ label = "mi-router-4c:yellow:power";
+ gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+};
+
+&state_default {
+ gpio {
+ groups = "gpio", "wdt", "wled_an";
+ function = "gpio";
+ };
+};
+
+&ehci {
+ status = "disabled";
+};
+
+&ohci {
+ status = "disabled";
+};
+
+&esw {
+ mediatek,portmap = <0x3d>;
+ mediatek,portdisable = <0x29>;
+};
+
+&wmac {
+ status = "okay";
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "bootloader";
+ reg = <0x0 0x20000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "config";
+ reg = <0x20000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@30000 {
+ label = "factory";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "crash";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "cfg_bak";
+ reg = <0x50000 0x10000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "overlay";
+ reg = <0x60000 0x100000>;
+ read-only;
+ };
+
+ partition@160000 {
+ label = "firmware";
+ reg = <0x160000 0xea0000>;
+ compatible = "denx,uimage";
+ };
+ };
+ };
+};
diff --git a/target/linux/ramips/image/mt76x8.mk
b/target/linux/ramips/image/mt76x8.mk
index 908e2df..f35b332 100644
--- a/target/linux/ramips/image/mt76x8.mk
+++ b/target/linux/ramips/image/mt76x8.mk
@@ -680,6 +680,14 @@ define Device/xiaomi_mir4a-100m
endef
TARGET_DEVICES += xiaomi_mir4a-100m
+define Device/xiaomi_mi-router-4c
+ IMAGE_SIZE := 14976k
+ DEVICE_VENDOR := Xiaomi
+ DEVICE_MODEL := Mi Router 4C
+ DEVICE_PACKAGES := uboot-envtools
+endef
+TARGET_DEVICES += xiaomi_mi-router-4c
+
define Device/xiaomi_miwifi-nano
IMAGE_SIZE := 16064k
DEVICE_VENDOR := Xiaomi
diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network
b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network
index 5a5ba58..66dd6db 100755
--- a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network
@@ -126,6 +126,10 @@ ramips_setup_interfaces()
ucidef_add_switch "switch0" \
"4:lan:1" "2:lan:2" "0:wan" "6@eth0"
;;
+ xiaomi,mi-router-4c)
+ ucidef_add_switch "switch0" \
+ "4:lan:1" "2:lan:2" "1:wan" "6@eth0"
+ ;;
xiaomi,miwifi-nano)
ucidef_add_switch "switch0" \
"0:lan:2" "2:lan:1" "4:wan" "6@eth0"
@@ -222,6 +226,7 @@ ramips_setup_macs()
label_mac=$(mtd_get_mac_binary factory 0x4)
wan_mac=$(mtd_get_mac_binary factory 0x28)
;;
+ xiaomi,mi-router-4c|\
xiaomi,mir4a-100m)
wan_mac=$(mtd_get_mac_binary factory 0x4)
;;
diff --git a/target/linux/ramips/mt76x8/base-files/etc/init.d/bootcount
b/target/linux/ramips/mt76x8/base-files/etc/init.d/bootcount
index 3c21433..23f1e71 100755
--- a/target/linux/ramips/mt76x8/base-files/etc/init.d/bootcount
+++ b/target/linux/ramips/mt76x8/base-files/etc/init.d/bootcount
@@ -8,6 +8,7 @@ boot() {
[ -n "$(fw_printenv bootcount bootchanged 2>/dev/null)" ] &&\
echo -e "bootcount\nbootchanged\n" |
/usr/sbin/fw_setenv -s -
;;
+ xiaomi,mi-router-4c|\
xiaomi,miwifi-nano)
fw_setenv flag_boot_success 1
;;
--
2.7.4
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
