Set the default state for LEDs to off. When a trigger is set, the
trigger will turn the LED automatically on.
Currently LEDs might stay on, e.g. when the LED trigger is set to a
netdev trigger and the interface is never activated or the 'none'
trigger is selected without setting the 'default' option to 0 and it's
set for the LED indicating the system running state.
Using off as a default value is also consistent with the documentation
in the OpenWrt wiki.
Signed-off-by: David Bauer <m...@david-bauer.net>
---
package/base-files/files/etc/init.d/led | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/package/base-files/files/etc/init.d/led
b/package/base-files/files/etc/init.d/led
index 932a69a82b..277fb4e76f 100755
--- a/package/base-files/files/etc/init.d/led
+++ b/package/base-files/files/etc/init.d/led
@@ -21,7 +21,7 @@ load_led() {
config_get dev $1 dev
config_get ports $1 port
config_get mode $1 mode
- config_get_bool default $1 default "nil"
+ config_get_bool default $1 default "0"
config_get delayon $1 delayon
config_get delayoff $1 delayoff
config_get interval $1 interval "50"
--
2.28.0
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
