> -----Original Message-----
> From: openwrt-devel [mailto:openwrt-devel-boun...@lists.openwrt.org]
> On Behalf Of David Bauer
> Sent: Dienstag, 21. Juli 2020 23:40
> To: openwrt-devel@lists.openwrt.org
> Subject: [PATCH] ramips: increase SPI frequency for MT7620 Archer
> 
> Increase the SPI frequency for the MT7620 based TP-Link Archer series to
> 30MHz.

Acked-by: Adrian Schmutzler <freif...@adrianschmutzler.de>

I'm not sure which are the frequency steps actually observed on that target, 
but raising it above the abundant copy/pasted 10 MHz seems a good idea in any 
case.

Best

Adrian

> 
> TP-Link uses different SPI flash chips for the same board revision, so be
> conservative to not break boards with a different chip. 30MHz should be well
> supported by all chips.
> 
> Tested on Archer C2 v1 (GD25Q64B) and Archer C20i (W25Q64FV).
> 
> Archer C20i (before)
> ====================
> root@OpenWrt:~# time dd if=/dev/mtd1 of=/tmp/test.bin bs=64k
> 122+0 records in
> 122+0 records out
> real  0m 15.30s
> user  0m 0.00s
> sys   0m 15.29s
> 
> Archer C20i (after)
> ===================
> root@OpenWrt:~# time dd if=/dev/mtd1 of=/tmp/test.bin bs=64k
> 122+0 records in
> 122+0 records out
> real  0m 5.99s
> user  0m 0.00s
> sys   0m 5.98s
> 
> Signed-off-by: David Bauer <m...@david-bauer.net>
> ---
>  target/linux/ramips/dts/mt7620a_tplink_archer-c2-v1.dts | 2 +-
> target/linux/ramips/dts/mt7620a_tplink_archer-mr200.dts | 2 +-
>  target/linux/ramips/dts/mt7620a_tplink_archer.dtsi      | 2 +-
>  3 files changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/target/linux/ramips/dts/mt7620a_tplink_archer-c2-v1.dts
> b/target/linux/ramips/dts/mt7620a_tplink_archer-c2-v1.dts
> index c0b2c1ae92..75ddc5fb5d 100644
> --- a/target/linux/ramips/dts/mt7620a_tplink_archer-c2-v1.dts
> +++ b/target/linux/ramips/dts/mt7620a_tplink_archer-c2-v1.dts
> @@ -82,7 +82,7 @@
>       flash@0 {
>               compatible = "jedec,spi-nor";
>               reg = <0>;
> -             spi-max-frequency = <10000000>;
> +             spi-max-frequency = <30000000>;
> 
>               partitions {
>                       compatible = "fixed-partitions";
> diff --git a/target/linux/ramips/dts/mt7620a_tplink_archer-mr200.dts
> b/target/linux/ramips/dts/mt7620a_tplink_archer-mr200.dts
> index c3c0efdfe6..0c0f4bb8e9 100644
> --- a/target/linux/ramips/dts/mt7620a_tplink_archer-mr200.dts
> +++ b/target/linux/ramips/dts/mt7620a_tplink_archer-mr200.dts
> @@ -121,7 +121,7 @@
>       flash@0 {
>               compatible = "jedec,spi-nor";
>               reg = <0>;
> -             spi-max-frequency = <10000000>;
> +             spi-max-frequency = <30000000>;
> 
>               partitions {
>                       compatible = "fixed-partitions";
> diff --git a/target/linux/ramips/dts/mt7620a_tplink_archer.dtsi
> b/target/linux/ramips/dts/mt7620a_tplink_archer.dtsi
> index 184627b9f4..670bad615d 100644
> --- a/target/linux/ramips/dts/mt7620a_tplink_archer.dtsi
> +++ b/target/linux/ramips/dts/mt7620a_tplink_archer.dtsi
> @@ -43,7 +43,7 @@
>       flash@0 {
>               compatible = "jedec,spi-nor";
>               reg = <0>;
> -             spi-max-frequency = <10000000>;
> +             spi-max-frequency = <30000000>;
> 
>               partitions {
>                       compatible = "fixed-partitions";
> --
> 2.27.0
> 
> 
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel@lists.openwrt.org
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel

Attachment: openpgp-digital-signature.asc
Description: PGP signature

_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel

Reply via email to