The line_state of the DSL connection is described in the system via a
hexadecimal variable. With this change the hexadecimal is mapped to a decimal
value. With this change it is now possible to store this value in a database,
so that it can be easily evaluated.
This is especially relevant for the collectd and gravana backend.
Signed-off-by: Florian Eckert <f...@dev.tdt.de>
---
.../base-files/lib/functions/lantiq_dsl.sh | 82 +++++++++++++------
1 file changed, 55 insertions(+), 27 deletions(-)
diff --git a/target/linux/lantiq/base-files/lib/functions/lantiq_dsl.sh
b/target/linux/lantiq/base-files/lib/functions/lantiq_dsl.sh
index 11b02fc4aa..4827d10bc5 100755
--- a/target/linux/lantiq/base-files/lib/functions/lantiq_dsl.sh
+++ b/target/linux/lantiq/base-files/lib/functions/lantiq_dsl.sh
@@ -650,40 +650,68 @@ line_data() {
line_state() {
local lsg=$(dsl_cmd lsg)
local ls=$(dsl_val "$lsg" nLineState);
- local s;
+ local s n;
case "$ls" in
- "0x0") s="not initialized" ;;
- "0x1") s="exception" ;;
- "0x10") s="not updated" ;;
- "0xff") s="idle request" ;;
- "0x100") s="idle" ;;
- "0x1ff") s="silent request" ;;
- "0x200") s="silent" ;;
- "0x300") s="handshake" ;;
- "0x380") s="full_init" ;;
- "0x400") s="discovery" ;;
- "0x500") s="training" ;;
- "0x600") s="analysis" ;;
- "0x700") s="exchange" ;;
- "0x800") s="showtime_no_sync" ;;
- "0x801") s="showtime_tc_sync" ;;
- "0x900") s="fastretrain" ;;
- "0xa00") s="lowpower_l2" ;;
- "0xb00") s="loopdiagnostic active" ;;
- "0xb10") s="loopdiagnostic data exchange" ;;
- "0xb20") s="loopdiagnostic data request" ;;
- "0xc00") s="loopdiagnostic complete" ;;
- "0x1000000") s="test" ;;
- "0xd00") s="resync" ;;
- "0x3c0") s="short init entry" ;;
- "") s="not running daemon"; ls="0xfff" ;;
- *) s="unknown" ;;
+ "0x0") s="not initialized"
+ n=1 ;;
+ "0x1") s="exception"
+ n=2 ;;
+ "0x10") s="not updated"
+ n=3 ;;
+ "0xff") s="idle request"
+ n=4 ;;
+ "0x100") s="idle"
+ n=5 ;;
+ "0x1ff") s="silent request"
+ n=6 ;;
+ "0x200") s="silent"
+ n=7 ;;
+ "0x300") s="handshake"
+ n=8 ;;
+ "0x380") s="full_init"
+ n=9 ;;
+ "0x400") s="discovery"
+ n=10 ;;
+ "0x500") s="training"
+ n=11 ;;
+ "0x600") s="analysis"
+ n=12 ;;
+ "0x700") s="exchange"
+ n=13 ;;
+ "0x800") s="showtime_no_sync"
+ n=14 ;;
+ "0x801") s="showtime_tc_sync"
+ n=15 ;;
+ "0x900") s="fastretrain"
+ n=16 ;;
+ "0xa00") s="lowpower_l2"
+ n=17 ;;
+ "0xb00") s="loopdiagnostic active"
+ n=18 ;;
+ "0xb10") s="loopdiagnostic data exchange"
+ n=19 ;;
+ "0xb20") s="loopdiagnostic data request"
+ n=20 ;;
+ "0xc00") s="loopdiagnostic complete"
+ n=21 ;;
+ "0x1000000") s="test"
+ n=22 ;;
+ "0xd00") s="resync"
+ n=23 ;;
+ "0x3c0") s="short init entry"
+ n=24 ;;
+ "") s="not running daemon"
+ ls="0xfff"
+ n=25 ;;
+ *) s="unknown"
+ n=26 ;;
esac
if [ "$action" = "lucistat" ]; then
echo "dsl.line_state_num=$ls"
echo "dsl.line_state_detail=\"$s\""
+ echo "dsl.line_state_mapping=$n"
if [ "$ls" = "0x801" ]; then
echo "dsl.line_state=\"UP\""
else
--
2.20.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
