Hi, > -----Original Message----- > From: openwrt-devel [mailto:openwrt-devel-boun...@lists.openwrt.org] > On Behalf Of Paul Spooren > Sent: Sonntag, 14. Juni 2020 22:22 > To: m...@adrianschmutzler.de; openwrt-devel@lists.openwrt.org > Subject: Re: [OpenWrt-Devel] [PATCH][RFC] build: disable target name in > image filename > > Hi, > > On 6/14/20 10:00 AM, m...@adrianschmutzler.de wrote: > >> -----Original Message----- > >> From: openwrt-devel [mailto:openwrt-devel- > boun...@lists.openwrt.org] > >> On Behalf Of Paul Spooren > >> Sent: Sonntag, 14. Juni 2020 11:34 > >> To: openwrt-devel@lists.openwrt.org > >> Subject: [OpenWrt-Devel] [PATCH][RFC] build: disable target name in > >> image filename > >> > >> The target/subtarget information in image filenames is barely of any > >> use for developers or end users. > >> > >> A developer reads the profile name and the target is either obvious > >> due to previous work or `cd targets/ && grep -r <profile>` tells the > >> target within 3ms. If no buildroot is available `cat <image> | tail > >> -c 200` allows a look at the attached metadata which includes the > target/subtarget. > >> > >> For users the information is entirely useless and maybe even harmful. > >> Target names like `cortexa9` could easily be mistaken as an actual > >> device name while the only relevant information would be > `linksys_wrt3200acm`. > >> Images are more realistically downloaded via a Wiki entry or a > >> firmware wizard. > >> > >> This commit therefore adds the new image option called > >> CONFIG_TARGET_FILENAMES to make the target/subtarget filename part > >> optional. It is disabled by default. > >> > >> As the profile name `generic` appears multiple times in the x86 > >> target as well as in oceton and ath25, the proposed patch on GitHub > >> should be merged > >> first: > >> * treewide: use unique profile names #3082 > >> https://github.com/openwrt/openwrt/pull/3082 > >> > >> Newly produced files would look like the following: > >> * openwrt-linksys_wrt3200acm-initramfs-kernel.bin > >> * openwrt-linksys_wrt3200acm.manifest > >> * openwrt-linksys_wrt3200acm-squashfs-factory.img > >> * openwrt-linksys_wrt3200acm-squashfs-sysupgrade.bin > > I just think of ar71xx and ath79, where we have the same device but > different targets. Of course, the name won't be exactly equal, as ath79 will > have e.g. tplink_ prefix and ar71xx won't. > Isn't ar71xx removed from master builds? It's neither at snapshot > https://downloads.openwrt.org/snapshots/targets/ nor planed to be re- > added to any upcoming release, is it?
Yes, but it's just an example for a similar situation which might arise in the future. Then, we even might not have the current situation with the different device names, but may end up with completely identical names except for the target. > > For bcm63xx, we have two subtargets that build the same devices. > > If we look at PR#2957, we might have a now bmips target at some point > that features the same devices as bcm63xx. > Can you please explain why that's the case? Why do we offer different > images for the same device? I understand that for ar71xx -> ath79 within a I don't have any idea why this situation at bcm63xx exists; I just got aware of it at some point. Maybe Noltari or KanjiMonster can help ... > transfer period but it's never the scope to offer different "flavors" > long term, is it? > > This won't necessarily break anything, as images will still be in different > folders (at least in /bin). > I would be at least confusing and reverts the "unique profile name" idea. > > However, we couldn't tell the difference between ar71xx/ath79 or similar > from the image name (easily) after this change, or whether it's generic or > smp for bcm63xx. For my personal taste, this drawback is bigger that the gain > we will get from removing the target/subtarget part. > Again, this sounds like a undesirable state where we not only build but also > maintain multiple images for the save device. Wouldn't it be possible to add > the target to all those "legacy images", however remove it wherever a target > uses device tree and images.mk aka has long term support? Well, just look at the situation in 19.07. There we have both ar71xx and ath79 for the same devices, and even if we wanted, it would actually be quite hard to really filter out the ath79 devices in ar71xx. I really don't think removing the target from image names will pay out in the future. > > So, unless there is overwhelming support, I tend to NAK this. > :( A compromise could be found by just removing the subtarget, but keeping the target in file names. This would mostly solve your problem with the generic names (at least there would be less duplicate info), but there would be significantly less situations where this was an impediment. Normally, no duplicate devices in a target exist, and if they are moved between subtargets, they are actually moved and not copied. The only remaining problem I can think of at the moment would be the bcm63xx situation, and maybe that one can be resolved at low cost. Best Adrian > > Best > Paul > > > >> Signed-off-by: Paul Spooren <m...@aparcar.org> > >> --- > >> It's been a while since I made a controversial patch[0] so it feels about > time. > >> > >> [0]: https://github.com/openwrt/openwrt/pull/2107 > >> > >> include/image.mk | 9 +++++---- > >> package/base-files/image-config.in | 9 +++++++++ > >> 2 files changed, 14 insertions(+), 4 deletions(-) > >> > >> diff --git a/include/image.mk b/include/image.mk index > >> 984b64fb9c..c6fc467c9e 100644 > >> --- a/include/image.mk > >> +++ b/include/image.mk > >> @@ -37,11 +37,12 @@ KDIR=$(KERNEL_BUILD_DIR) > KDIR_TMP=$(KDIR)/tmp > >> DTS_DIR:=$(LINUX_DIR)/arch/$(LINUX_KARCH)/boot/dts > >> > >> +IMG_PREFIX_TARGET:=$(if > $(CONFIG_TARGET_FILENAMES),$(BOARD)$(if > >> +$(SUBTARGET),-$(SUBTARGET))-) > >> IMG_PREFIX_EXTRA:=$(if $(EXTRA_IMAGE_NAME),$(call > >> sanitize,$(EXTRA_IMAGE_NAME))-) IMG_PREFIX_VERNUM:=$(if > >> $(CONFIG_VERSION_FILENAMES),$(call sanitize,$(VERSION_NUMBER))-) > >> IMG_PREFIX_VERCODE:=$(if > $(CONFIG_VERSION_CODE_FILENAMES),$(call > >> sanitize,$(VERSION_CODE))-) > >> > >> -IMG_PREFIX:=$(VERSION_DIST_SANITIZED)- > >> > $(IMG_PREFIX_VERNUM)$(IMG_PREFIX_VERCODE)$(IMG_PREFIX_EXTRA)$ > >> (BOARD)$(if $(SUBTARGET),-$(SUBTARGET)) > >> +IMG_PREFIX:=$(VERSION_DIST_SANITIZED)- > >> $(IMG_PREFIX_VERNUM)$(IMG_PREFIX_ > >> +VERCODE)$(IMG_PREFIX_EXTRA)$(IMG_PREFIX_TARGET) > >> IMG_ROOTFS:=$(IMG_PREFIX)-rootfs > >> IMG_COMBINED:=$(IMG_PREFIX)-combined > >> IMG_PART_SIGNATURE:=$(shell echo > >> $(SOURCE_DATE_EPOCH)$(LINUX_VERMAGIC) | mkhash md5 | cut -b1-8) > @@ > >> -293,7 +294,7 @@ endef > >> > >> define Image/Manifest > >> $(call opkg,$(TARGET_DIR_ORIG)) list-installed > \ > >> - $(BIN_DIR)/$(IMG_PREFIX)$(if $(PROFILE_SANITIZED),- > >> $(PROFILE_SANITIZED)).manifest > >> + $(BIN_DIR)/$(IMG_PREFIX)$(if > >> +$(PROFILE_SANITIZED),$(PROFILE_SANITIZED)).manifest > >> endef > >> > >> define Image/gzip-ext4-padded-squashfs @@ -317,7 +318,7 @@ ifdef > >> CONFIG_TARGET_ROOTFS_TARGZ > >> define Image/Build/targz > >> $(TAR) -cp --numeric-owner --owner=0 --group=0 --mode=a-s -- > >> sort=name \ > >> $(if $(SOURCE_DATE_EPOCH),-- > >> mtime="@$(SOURCE_DATE_EPOCH)") \ > >> - -C $(TARGET_DIR)/ . | gzip -9n > > >> $(BIN_DIR)/$(IMG_PREFIX)$(if $(PROFILE_SANITIZED),- > >> $(PROFILE_SANITIZED))-rootfs.tar.gz > >> + -C $(TARGET_DIR)/ . | gzip -9n > > >> $(BIN_DIR)/$(IMG_PREFIX)$(if > >> +$(PROFILE_SANITIZED),$(PROFILE_SANITIZED))-rootfs.tar.gz > >> endef > >> endif > >> > >> @@ -385,7 +386,7 @@ define Device/Init > >> > >> IMAGES := > >> ARTIFACTS := > >> - IMAGE_PREFIX := $(IMG_PREFIX)-$(1) > >> + IMAGE_PREFIX := $(IMG_PREFIX)$(1) > >> IMAGE_NAME = $$(IMAGE_PREFIX)-$$(1)-$$(2) > >> IMAGE_SIZE := > >> KERNEL_PREFIX = $$(IMAGE_PREFIX) > >> diff --git a/package/base-files/image-config.in > >> b/package/base-files/image- config.in index 3432db525a..5a70d51a7a > >> 100644 > >> --- a/package/base-files/image-config.in > >> +++ b/package/base-files/image-config.in > >> @@ -264,6 +264,15 @@ if VERSIONOPT > >> Enable this to include the revision identifier or the > configured > >> version code into the firmware image, SDK- and > Image Builder > >> archive > >> file names > >> + > >> + config TARGET_FILENAMES > >> + bool > >> + prompt "Target and subtarget in filenames" > >> + default n > >> + help > >> + Enable this to include the target (and subtarget) in > >> + firmware image, SDK- and Image Builder archive file > >> names > >> + > >> endif > >> > >> > >> -- > >> 2.20.1 > >> > >> > >> _______________________________________________ > >> openwrt-devel mailing list > >> openwrt-devel@lists.openwrt.org > >> https://lists.openwrt.org/mailman/listinfo/openwrt-devel > > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/mailman/listinfo/openwrt-devel
openpgp-digital-signature.asc
Description: PGP signature
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
