Bjørn Mork <[email protected]> writes: > I wonder if I have understood this correctly: > 1) vlan_filtering is required when bridging tagged and untagged DSA > ports, and > 2) all bridge ports, including the wireless VIFs, must be configured > with the correct VIDs when vlan_filtering is enabled > > An if so, how are we supposed to configure that?
quarky just posted a great tip in the forum: https://forum.openwrt.org/t/mt7621-dsa-switch-vlan-configuration/65458/2?u=bmork Despite having looked for exactly this, I had not seen the "vlan_default_pvid" setting before. This seems to solve the problem I described. I believe the tagged wan port, where one VID on wan is part of a bridge, is a semi-common usecase for OpenWrt (and CPEs in general). Maybe this kind of bridge automatically should enable settings like: ip link set <br-name> type bridge vlan_default_pvid <wan-vid> ip link set <br-name> type bridge vlan_filtering 1 as described by quarky? AFAICS, a DSA based brigde won't work without something like that, and having each user figure that out by themselves is going to create a lot of frustration... Bjørn _______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
