This patch adds supports for GL-MV1000.
Specification:
- SOC: Marvell Armada 88F3720 (1GHz)
- Flash: 16MB (W25Q128FWSIG)
- RAM: 1GB DDR4
- Ethernet: 3x GE (1 WAN + 2 LAN)
- EMMC: 8GB EMMC (KLM8G1GETF-B041)
- MicroSD: 1x microSD slot
- USB: 1x USB 2.0 port(TypeA),1x USB 3.0 port(TypeC)
- Button: 1x reset button,1x slide switch
- LED: 3x greed LED
- UART: 1x UART on PCB (JP1: 3.3V, RX, TX, GND)
Signed-off-by: Li Zhang <li.zh...@gl-inet.com>
---
package/boot/uboot-envtools/files/mvebu | 3 +
.../cortexa53/base-files/etc/board.d/02_network | 3 +-
.../boot/dts/marvell/armada-gl-mv1000-emmc.dts | 68 ++++++++++++++++++++++
target/linux/mvebu/image/Makefile | 9 +++
target/linux/mvebu/image/cortexa53.mk | 9 +++
target/linux/mvebu/image/gen_mvebu_sdcard_img.sh | 6 ++
.../mvebu/image/generic-arm64-emmc.bootscript | 12 ++++
7 files changed, 109 insertions(+), 1 deletion(-)
create mode 100644
target/linux/mvebu/files-4.19/arch/arm64/boot/dts/marvell/armada-gl-mv1000-emmc.dts
create mode 100644 target/linux/mvebu/image/generic-arm64-emmc.bootscript
diff --git a/package/boot/uboot-envtools/files/mvebu
b/package/boot/uboot-envtools/files/mvebu
index 7902384..9d23c77 100644
--- a/package/boot/uboot-envtools/files/mvebu
+++ b/package/boot/uboot-envtools/files/mvebu
@@ -24,6 +24,9 @@ globalscale,espressobin-v7-emmc|\
marvell,armada8040-mcbin)
ubootenv_add_uci_config "/dev/mtd0" "0x3f0000" "0x10000" "0x10000" "1"
;;
+glinet,gl-mv1000-emmc)
+ ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x8000" "0x8000" "1"
+ ;;
linksys,caiman|\
linksys,cobra|\
linksys,shelby)
diff --git a/target/linux/mvebu/cortexa53/base-files/etc/board.d/02_network
b/target/linux/mvebu/cortexa53/base-files/etc/board.d/02_network
index ba4b930..e5ff667 100755
--- a/target/linux/mvebu/cortexa53/base-files/etc/board.d/02_network
+++ b/target/linux/mvebu/cortexa53/base-files/etc/board.d/02_network
@@ -14,7 +14,8 @@ case "$board" in
globalscale,espressobin|\
globalscale,espressobin-emmc|\
globalscale,espressobin-v7|\
-globalscale,espressobin-v7-emmc)
+globalscale,espressobin-v7-emmc|\
+glinet,gl-mv1000-emmc)
ucidef_set_interfaces_lan_wan "lan0 lan1" "wan"
;;
marvell,armada-3720-db|\
diff --git
a/target/linux/mvebu/files-4.19/arch/arm64/boot/dts/marvell/armada-gl-mv1000-emmc.dts
b/target/linux/mvebu/files-4.19/arch/arm64/boot/dts/marvell/armada-gl-mv1000-emmc.dts
new file mode 100644
index 0000000..fe01dfe
--- /dev/null
+++
b/target/linux/mvebu/files-4.19/arch/arm64/boot/dts/marvell/armada-gl-mv1000-emmc.dts
@@ -0,0 +1,68 @@
+/*
+ * Device Tree file for GL.iNet GL-MV1000
+ */
+
+#include "armada-3720-espressobin.dts"
+
+/ {
+ model = "GL.inet GL-MV1000 (Marvell)";
+ compatible = "glinet,gl-mv1000-emmc";
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ reg = <0>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <104000000>;
+ m25p,fast-read;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0 0xf0000>;
+ };
+
+ partition@f0000 {
+ label = "u-boot-env";
+ reg = <0Xf0000 0x8000>;
+ };
+
+ art: partition@f8000 {
+ label = "art";
+ reg = <0xf8000 0x8000>;
+ };
+
+ };
+ };
+};
+
+&sdhci1 {
+ wp-inverted;
+ bus-width = <4>;
+ cd-gpios = <&gpionb 17 GPIO_ACTIVE_LOW>;
+ marvell,pad-type = "sd";
+ no-1-8-v;
+ vqmmc-supply = <&vcc_sd_reg1>;
+ status = "okay";
+};
+
+
+&sdhci0 {
+ bus-width = <8>;
+ mmc-ddr-1_8v;
+ mmc-hs400-1_8v;
+ non-removable;
+ no-sd;
+ no-sdio;
+ marvell,pad-type = "fixed-1-8v";
+ status = "okay";
+};
+
+ð0 {
+ mtd-mac-address = <&art 0x0>;
+};
diff --git a/target/linux/mvebu/image/Makefile
b/target/linux/mvebu/image/Makefile
index ef92748..b848049 100644
--- a/target/linux/mvebu/image/Makefile
+++ b/target/linux/mvebu/image/Makefile
@@ -107,6 +107,15 @@ define Device/Default-arm64
KERNEL := kernel-bin
endef
+define Device/Default-arm64-emmc
+ BOOT_SCRIPT := generic-arm64-emmc
+ DEVICE_DTS_DIR := $(DTS_DIR)/marvell
+ IMAGES := emmc.img
+ IMAGE/emmc.img := boot-scr | boot-img-ext4 | sdcard-img-ext4 |
append-metadata
+ KERNEL_NAME := Image
+ KERNEL := kernel-bin
+endef
+
define Device/NAND-128K
BLOCKSIZE := 128k
PAGESIZE := 2048
diff --git a/target/linux/mvebu/image/cortexa53.mk
b/target/linux/mvebu/image/cortexa53.mk
index 77f5c79..4dfd0b4 100644
--- a/target/linux/mvebu/image/cortexa53.mk
+++ b/target/linux/mvebu/image/cortexa53.mk
@@ -69,3 +69,12 @@ define Device/methode_udpu
BOOT_SCRIPT := udpu
endef
TARGET_DEVICES += methode_udpu
+
+define Device/glinet_gl-mv1000-emmc
+ $(call Device/Default-arm64-emmc)
+ DEVICE_TITLE := GL.iNet GL-MV1000 EMMC
+ DEVICE_DTS := armada-gl-mv1000-emmc
+ SUPPORTED_DEVICES := glinet,gl-mv1000-emmc
+endef
+TARGET_DEVICES += glinet_gl-mv1000-emmc
+
diff --git a/target/linux/mvebu/image/gen_mvebu_sdcard_img.sh
b/target/linux/mvebu/image/gen_mvebu_sdcard_img.sh
index 842e591..50028fe 100755
--- a/target/linux/mvebu/image/gen_mvebu_sdcard_img.sh
+++ b/target/linux/mvebu/image/gen_mvebu_sdcard_img.sh
@@ -51,6 +51,12 @@ while [ "$#" -ge 3 ]; do
shift; shift; shift
done
+model=''
+model=$(echo $OUTFILE | grep "gl-mv1000-emmc")
+[ "$model" != "" ] && {
+ ptgen_args="$ptgen_args -t 83 -p 7093504"
+}
+
head=16
sect=63
diff --git a/target/linux/mvebu/image/generic-arm64-emmc.bootscript
b/target/linux/mvebu/image/generic-arm64-emmc.bootscript
new file mode 100644
index 0000000..4de4d39
--- /dev/null
+++ b/target/linux/mvebu/image/generic-arm64-emmc.bootscript
@@ -0,0 +1,12 @@
+setenv bootargs "root=/dev/mmcblk0p2 rw rootwait"
+
+if test -n "${console}"; then
+ setenv bootargs "${bootargs} ${console}"
+fi
+
+setenv mmcdev 0
+
+load mmc ${mmcdev}:1 ${fdt_addr} @DTB@.dtb
+load mmc ${mmcdev}:1 ${kernel_addr} Image
+
+booti ${kernel_addr} - ${fdt_addr}
--
2.7.4
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
