From: Dan Haab <dan.h...@legrand.com>
This prepares support for models XAP-1610 and XWR-3150. Flashing
requires using Luxul firmware version:
1) 8.1.0 or newer for XAP-1610
2) 6.4.0 or newer for XWR-3150
and uploading firmware using "Firmware Update" web UI page.
Signed-off-by: Dan Haab <dan.h...@legrand.com>
---
.../bcm53xx/base-files/etc/board.d/02_network | 22 ++++++++++++++++++-
target/linux/bcm53xx/image/Makefile | 18 +++++++++++++++
2 files changed, 39 insertions(+), 1 deletion(-)
diff --git a/target/linux/bcm53xx/base-files/etc/board.d/02_network
b/target/linux/bcm53xx/base-files/etc/board.d/02_network
index f86f12407f..9256cbdc54 100755
--- a/target/linux/bcm53xx/base-files/etc/board.d/02_network
+++ b/target/linux/bcm53xx/base-files/etc/board.d/02_network
@@ -36,6 +36,15 @@ bcm53xx_setup_interfaces()
ucidef_add_switch "switch0" \
"0:wan" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5@eth0"
;;
+ luxul,xap-1610-v1)
+ ucidef_add_switch "switch0" \
+ "0:lan" "1:lan" "5@eth0"
+ ucidef_set_interface_lan "eth0.1" "dhcp"
+ ;;
+ luxul,xwr-3150-v1)
+ ucidef_add_switch "switch0" \
+ "0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "4:wan" "5@eth0"
+ ;;
phicomm,k3)
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "2:lan" "3:wan" "5@eth0"
@@ -100,7 +109,18 @@ bcm53xx_setup_macs()
esac
# If WAN MAC isn't explicitly set, calculate it using base MAC as
reference.
- [ -z "$wan_macaddr" -a -n "$etXmacaddr" ] && wan_macaddr=$(macaddr_add
"$etXmacaddr" 1)
+ [ -z "$wan_macaddr" -a -n "$etXmacaddr" ] && {
+ local offset=1
+
+ case "$board" in
+ luxul,xwr-3100v1 | \
+ luxul,xwr-3150-v1)
+ offset=5
+ ;;
+ esac
+
+ wan_macaddr=$(macaddr_add "$etXmacaddr" $offset)
+ }
[ -n "$wan_macaddr" ] && ucidef_set_interface_macaddr "wan"
"$wan_macaddr"
}
diff --git a/target/linux/bcm53xx/image/Makefile
b/target/linux/bcm53xx/image/Makefile
index 610af03abe..b3ec1e99a2 100644
--- a/target/linux/bcm53xx/image/Makefile
+++ b/target/linux/bcm53xx/image/Makefile
@@ -291,6 +291,15 @@ define Device/luxul-abr-4500
endef
TARGET_DEVICES += luxul-abr-4500
+define Device/luxul-xap-1610
+ $(Device/luxul)
+ DEVICE_MODEL := XAP-1610
+ DEVICE_PACKAGES := $(BRCMFMAC_4366C0)
+ IMAGE/lxl := append-rootfs | trx-serial | luxul-lxl
+ LUXUL_BOARD := XAP-1610
+endef
+TARGET_DEVICES += luxul-xap-1610
+
define Device/luxul-xbr-4500
$(Device/luxul)
DEVICE_MODEL := XBR-4500
@@ -299,6 +308,15 @@ define Device/luxul-xbr-4500
endef
TARGET_DEVICES += luxul-xbr-4500
+define Device/luxul-xwr-3150
+ $(Device/luxul)
+ DEVICE_MODEL := XWR-3150
+ DEVICE_PACKAGES := $(BRCMFMAC_4366C0) $(USB3_PACKAGES)
+ DEVICE_DTS := bcm47094-luxul-xwr-3150-v1
+ LUXUL_BOARD := XWR-3150
+endef
+TARGET_DEVICES += luxul-xwr-3150
+
define Device/netgear
DEVICE_VENDOR := NETGEAR
IMAGES := chk
--
2.17.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
