On Mon, 2 Mar 2020 at 10:21, Enrico Mioso <mrkiko...@gmail.com> wrote: > > Hi! I flashed OpenWRt master (commit > 4349d4c6823bfe09caabbdd3c9a65198addc76d6) on this device. All seems to work > fine, but I sawthis in the dmesg. > > should I worry about my flash chip? > thank you guys!! > > Enrico
This could be a software bug the same as FS#2837 [1]. Please try reverting the said commit (15a0701cdde8eeae2a54880b813cdb8cdc09a384) and see if it solves the issue for you. [1] https://bugs.openwrt.org/index.php?do=details&task_id=2837 Regards, yousong > > config.buildinfo: > > CONFIG_TARGET_ramips=y > CONFIG_TARGET_ramips_mt7621=y > CONFIG_TARGET_ramips_mt7621_DEVICE_zbtlink_zbt-wg3526-32m=y > CONFIG_FEED_luci=y > CONFIG_FEED_packages=y > CONFIG_FEED_routing=y > CONFIG_FEED_telephony=y > CONFIG_IMAGEOPT=y > # CONFIG_KERNEL_CRASHLOG is not set > CONFIG_KERNEL_MIPS_FPU_EMULATOR=y > CONFIG_KERNEL_MIPS_FP_SUPPORT=y > # CONFIG_KERNEL_SWAP is not set > CONFIG_PACKAGE_ip-tiny=y > CONFIG_PACKAGE_kmod-crypto-crc32=y > CONFIG_PACKAGE_kmod-crypto-crc32c=y > CONFIG_PACKAGE_kmod-crypto-hash=y > CONFIG_PACKAGE_kmod-fs-ext4=y > CONFIG_PACKAGE_kmod-fs-f2fs=y > CONFIG_PACKAGE_kmod-fs-vfat=y > CONFIG_PACKAGE_kmod-lib-crc16=y > CONFIG_PACKAGE_kmod-mii=y > CONFIG_PACKAGE_kmod-nls-cp437=y > CONFIG_PACKAGE_kmod-nls-iso8859-1=y > CONFIG_PACKAGE_kmod-nls-utf8=y > CONFIG_PACKAGE_kmod-tun=y > CONFIG_PACKAGE_kmod-udptunnel4=y > CONFIG_PACKAGE_kmod-udptunnel6=y > CONFIG_PACKAGE_kmod-usb-net=y > CONFIG_PACKAGE_kmod-usb-net-qmi-wwan=y > CONFIG_PACKAGE_kmod-usb-serial=y > CONFIG_PACKAGE_kmod-usb-serial-option=y > CONFIG_PACKAGE_kmod-usb-serial-qualcomm=m > CONFIG_PACKAGE_kmod-usb-serial-wwan=y > CONFIG_PACKAGE_kmod-usb-wdm=y > CONFIG_PACKAGE_kmod-wireguard=y > CONFIG_PACKAGE_wireguard=y > CONFIG_PACKAGE_wireguard-tools=y > > full dmesg: > [ 0.000000] Linux version 4.14.171 (mrkiko@mStation) (gcc version 8.3.0 > (OpenWrt GCC 8.3.0 r12417-4349d4c682)) #0 SMP Sun Mar 1 22:39:27 2020 > [ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3 > [ 0.000000] bootconsole [early0] enabled > [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc) > [ 0.000000] MIPS: machine is Zbtlink ZBT-WG3526 (32M) > [ 0.000000] Determined physical RAM map: > [ 0.000000] memory: 1c000000 @ 00000000 (usable) > [ 0.000000] memory: 04000000 @ 20000000 (usable) > [ 0.000000] Initrd not found or empty - disabling initrd > [ 0.000000] VPE topology {2,2} total 4 > [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. > [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 > bytes > [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. > [ 0.000000] Zone ranges: > [ 0.000000] Normal [mem 0x0000000000000000-0x000000000fffffff] > [ 0.000000] HighMem [mem 0x0000000010000000-0x0000000023ffffff] > [ 0.000000] Movable zone start for each node > [ 0.000000] Early memory node ranges > [ 0.000000] node 0: [mem 0x0000000000000000-0x000000001bffffff] > [ 0.000000] node 0: [mem 0x0000000020000000-0x0000000023ffffff] > [ 0.000000] Initmem setup node 0 [mem > 0x0000000000000000-0x0000000023ffffff] > [ 0.000000] On node 0 totalpages: 131072 > [ 0.000000] free_area_init_node: node 0, pgdat 805f8360, node_mem_map > 81003000 > [ 0.000000] Normal zone: 576 pages used for memmap > [ 0.000000] Normal zone: 0 pages reserved > [ 0.000000] Normal zone: 65536 pages, LIFO batch:15 > [ 0.000000] HighMem zone: 65536 pages, LIFO batch:15 > [ 0.000000] random: get_random_bytes called from start_kernel+0x9c/0x4d8 > with crng_init=0 > [ 0.000000] percpu: Embedded 14 pages/cpu s26544 r8192 d22608 u57344 > [ 0.000000] pcpu-alloc: s26544 r8192 d22608 u57344 alloc=14*4096 > [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 > [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130496 > [ 0.000000] Kernel command line: console=ttyS0,115200 > rootfstype=squashfs,jffs2 > [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) > [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) > [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) > [ 0.000000] Writing ErrCtl register=0001aa20 > [ 0.000000] Readback ErrCtl register=0001aa20 > [ 0.000000] Memory: 510976K/524288K available (4819K kernel code, 244K > rwdata, 1048K rodata, 1236K init, 253K bss, 13312K reserved, 0K cma-reserved, > 262144K highmem) > [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 > [ 0.000000] Hierarchical RCU implementation. > [ 0.000000] NR_IRQS: 256 > [ 0.000000] CPU Clock: 880MHz > [ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: > 0xcaf478abb4, max_idle_ns: 440795247997 ns > [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, > max_idle_ns: 4343773742 ns > [ 0.000010] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every > 4880645118ns > [ 0.007824] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688) > [ 0.073981] pid_max: default: 32768 minimum: 301 > [ 0.078798] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) > [ 0.085307] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 > bytes) > [ 0.094587] Hierarchical SRCU implementation. > [ 0.099822] smp: Bringing up secondary CPUs ... > [ 0.105966] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. > [ 0.105975] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 > bytes > [ 0.105987] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. > [ 0.106134] CPU1 revision is: 0001992f (MIPS 1004Kc) > [ 0.164579] Synchronize counters for CPU 1: done. > [ 0.206013] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. > [ 0.206021] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 > bytes > [ 0.206030] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. > [ 0.206106] CPU2 revision is: 0001992f (MIPS 1004Kc) > [ 0.255787] Synchronize counters for CPU 2: done. > [ 0.287157] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. > [ 0.287165] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 > bytes > [ 0.287173] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. > [ 0.287253] CPU3 revision is: 0001992f (MIPS 1004Kc) > [ 0.340970] Synchronize counters for CPU 3: done. > [ 0.370844] smp: Brought up 1 node, 4 CPUs > [ 0.379150] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, > max_idle_ns: 19112604462750000 ns > [ 0.388958] futex hash table entries: 1024 (order: 3, 32768 bytes) > [ 0.395386] pinctrl core: initialized pinctrl subsystem > [ 0.402163] NET: Registered protocol family 16 > [ 0.417708] FPU Affinity set after 11720 emulations > [ 0.419274] pull PCIe RST: RALINK_RSTCTRL = 0 > [ 0.723989] release PCIe RST: RALINK_RSTCTRL = 7000000 > [ 0.729022] ***** Xtal 40MHz ***** > [ 0.732396] release PCIe RST: RALINK_RSTCTRL = 7000000 > [ 0.737502] Port 0 N_FTS = 1b105000 > [ 0.740944] Port 1 N_FTS = 1b105000 > [ 0.744404] Port 2 N_FTS = 1b105000 > [ 1.899350] -> 21007f2 > [ 1.901704] PCIE0 enabled > [ 1.904298] PCIE1 enabled > [ 1.906887] PCIE2 enabled > [ 1.909509] PCI host bridge /pcie@1e140000 ranges: > [ 1.914254] MEM 0x0000000060000000..0x000000006fffffff > [ 1.919420] IO 0x000000001e160000..0x000000001e16ffff > [ 1.924629] PCI coherence region base: 0xbfbf8000, mask/settings: > 0x60000000 > [ 1.941857] mt7621_gpio 1e000600.gpio: registering 32 gpios > [ 1.947712] mt7621_gpio 1e000600.gpio: registering 32 gpios > [ 1.953491] mt7621_gpio 1e000600.gpio: registering 32 gpios > [ 1.960794] i2c-mt7621 1e000900.i2c: clock 100KHz, re-start not support > [ 1.967960] PCI host bridge to bus 0000:00 > [ 1.972045] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff] > [ 1.978812] pci_bus 0000:00: root bus resource [io 0xffffffff] > [ 1.984709] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0] > [ 1.991433] pci_bus 0000:00: No busn resource found for root bus, will use > [bus 00-ff] > [ 1.999368] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400 > [ 1.999411] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff] > [ 1.999423] pci 0000:00:00.0: reg 0x14: [mem 0x60500000-0x6050ffff] > [ 1.999490] pci 0000:00:00.0: supports D1 > [ 1.999499] pci 0000:00:00.0: PME# supported from D0 D1 D3hot > [ 1.999757] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400 > [ 1.999796] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff] > [ 1.999816] pci 0000:00:01.0: reg 0x14: [mem 0x60510000-0x6051ffff] > [ 1.999882] pci 0000:00:01.0: supports D1 > [ 1.999892] pci 0000:00:01.0: PME# supported from D0 D1 D3hot > [ 2.000115] pci 0000:00:02.0: [0e8d:0801] type 01 class 0x060400 > [ 2.000165] pci 0000:00:02.0: reg 0x10: [mem 0x00000000-0x7fffffff] > [ 2.000183] pci 0000:00:02.0: reg 0x14: [mem 0x60520000-0x6052ffff] > [ 2.000245] pci 0000:00:02.0: supports D1 > [ 2.000254] pci 0000:00:02.0: PME# supported from D0 D1 D3hot > [ 2.000748] pci 0000:01:00.0: [14c3:7603] type 00 class 0x028000 > [ 2.000808] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff] > [ 2.000945] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold > [ 2.001153] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 > [ 2.001419] pci 0000:02:00.0: [14c3:7662] type 00 class 0x028000 > [ 2.001485] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit] > [ 2.001533] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] > [ 2.001627] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold > [ 2.001838] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 > [ 2.002102] pci 0000:03:00.0: [1b21:0611] type 00 class 0x010185 > [ 2.002159] pci 0000:03:00.0: reg 0x10: [io 0x0000-0x0007] > [ 2.002180] pci 0000:03:00.0: reg 0x14: [io 0x0000-0x0003] > [ 2.002196] pci 0000:03:00.0: reg 0x18: [io 0x0000-0x0007] > [ 2.002211] pci 0000:03:00.0: reg 0x1c: [io 0x0000-0x0003] > [ 2.002226] pci 0000:03:00.0: reg 0x20: [io 0x0000-0x000f] > [ 2.002243] pci 0000:03:00.0: reg 0x24: [mem 0x00000000-0x000001ff] > [ 2.002258] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] > [ 2.002540] pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 03 > [ 2.002567] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 03 > [ 2.002672] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000] > [ 2.009184] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000] > [ 2.016154] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000] > [ 2.022661] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000] > [ 2.029599] pci 0000:00:02.0: BAR 0: no space for [mem size 0x80000000] > [ 2.036146] pci 0000:00:02.0: BAR 0: failed to assign [mem size 0x80000000] > [ 2.043082] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff] > [ 2.049796] pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff] > [ 2.056554] pci 0000:00:01.0: BAR 9: assigned [mem 0x60200000-0x602fffff > pref] > [ 2.063704] pci 0000:00:02.0: BAR 8: assigned [mem 0x60300000-0x603fffff] > [ 2.070468] pci 0000:00:02.0: BAR 9: assigned [mem 0x60400000-0x604fffff > pref] > [ 2.077622] pci 0000:00:00.0: BAR 1: assigned [mem 0x60500000-0x6050ffff] > [ 2.084385] pci 0000:00:01.0: BAR 1: assigned [mem 0x60510000-0x6051ffff] > [ 2.091099] pci 0000:00:02.0: BAR 1: assigned [mem 0x60520000-0x6052ffff] > [ 2.097858] pci 0000:00:02.0: BAR 7: no space for [io size 0x1000] > [ 2.104050] pci 0000:00:02.0: BAR 7: failed to assign [io size 0x1000] > [ 2.110649] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff] > [ 2.117367] pci 0000:00:00.0: PCI bridge to [bus 01] > [ 2.122309] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff] > [ 2.129034] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff > 64bit] > [ 2.136311] pci 0000:02:00.0: BAR 6: assigned [mem 0x60200000-0x6020ffff > pref] > [ 2.143449] pci 0000:00:01.0: PCI bridge to [bus 02] > [ 2.148397] pci 0000:00:01.0: bridge window [mem 0x60100000-0x601fffff] > [ 2.155113] pci 0000:00:01.0: bridge window [mem 0x60200000-0x602fffff > pref] > [ 2.162321] pci 0000:03:00.0: BAR 6: assigned [mem 0x60400000-0x6040ffff > pref] > [ 2.169461] pci 0000:03:00.0: BAR 5: assigned [mem 0x60300000-0x603001ff] > [ 2.176239] pci 0000:03:00.0: BAR 4: no space for [io size 0x0010] > [ 2.182415] pci 0000:03:00.0: BAR 4: failed to assign [io size 0x0010] > [ 2.189015] pci 0000:03:00.0: BAR 0: no space for [io size 0x0008] > [ 2.195202] pci 0000:03:00.0: BAR 0: failed to assign [io size 0x0008] > [ 2.201791] pci 0000:03:00.0: BAR 2: no space for [io size 0x0008] > [ 2.207994] pci 0000:03:00.0: BAR 2: failed to assign [io size 0x0008] > [ 2.214583] pci 0000:03:00.0: BAR 1: no space for [io size 0x0004] > [ 2.220778] pci 0000:03:00.0: BAR 1: failed to assign [io size 0x0004] > [ 2.227363] pci 0000:03:00.0: BAR 3: no space for [io size 0x0004] > [ 2.233573] pci 0000:03:00.0: BAR 3: failed to assign [io size 0x0004] > [ 2.240152] pci 0000:00:02.0: PCI bridge to [bus 03] > [ 2.245057] pci 0000:00:02.0: bridge window [mem 0x60300000-0x603fffff] > [ 2.251823] pci 0000:00:02.0: bridge window [mem 0x60400000-0x604fffff > pref] > [ 2.260578] clocksource: Switched to clocksource GIC > [ 2.267445] NET: Registered protocol family 2 > [ 2.272412] TCP established hash table entries: 2048 (order: 1, 8192 bytes) > [ 2.279294] TCP bind hash table entries: 2048 (order: 2, 16384 bytes) > [ 2.285758] TCP: Hash tables configured (established 2048 bind 2048) > [ 2.292181] UDP hash table entries: 256 (order: 1, 8192 bytes) > [ 2.297953] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) > [ 2.304453] NET: Registered protocol family 1 > [ 2.308785] PCI: CLS 0 bytes, default 32 > [ 2.540520] 4 CPUs re-calibrate udelay(lpj = 2924544) > [ 2.547457] workingset: timestamp_bits=14 max_order=17 bucket_order=3 > [ 2.560344] random: fast init done > [ 2.561698] squashfs: version 4.0 (2009/01/31) Phillip Lougher > [ 2.569467] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) > (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. > [ 2.583068] bounce: pool size: 64 pages > [ 2.586843] io scheduler noop registered > [ 2.590753] io scheduler deadline registered (default) > [ 2.596839] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled > [ 2.604556] console [ttyS0] disabled > [ 2.608110] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, > base_baud = 3125000) is a 16550A > [ 2.617182] console [ttyS0] enabled > [ 2.624065] bootconsole [early0] disabled > [ 2.634362] MediaTek Nand driver init, version v2.1 Fix AHB virt2phys error > [ 2.641781] spi-mt7621 1e000b00.spi: sys_freq: 220000000 > [ 2.656954] m25p80 spi0.0: w25q256 (32768 Kbytes) > [ 2.661740] 4 fixed-partitions partitions found on MTD device spi0.0 > [ 2.668061] Creating 4 MTD partitions on "spi0.0": > [ 2.672858] 0x000000000000-0x000000030000 : "u-boot" > [ 2.678933] 0x000000030000-0x000000040000 : "u-boot-env" > [ 2.685304] 0x000000040000-0x000000050000 : "factory" > [ 2.691398] 0x000000050000-0x000002000000 : "firmware" > [ 2.697705] 2 uimage-fw partitions found on MTD device firmware > [ 2.703690] Creating 2 MTD partitions on "firmware": > [ 2.708648] 0x000000000000-0x0000001ee085 : "kernel" > [ 2.714719] 0x0000001ee085-0x000001fb0000 : "rootfs" > [ 2.720707] mtd: device 5 (rootfs) set to be root filesystem > [ 2.726481] 1 squashfs-split partitions found on MTD device rootfs > [ 2.732675] Creating 1 MTD partitions on "rootfs": > [ 2.737458] 0x000000301f7b-0x000001dc1f7b : "rootfs_data" > [ 2.744522] libphy: Fixed MDIO Bus: probed > [ 2.812601] libphy: mdio: probed > [ 4.216935] mtk_soc_eth 1e100000.ethernet: loaded mt7530 driver > [ 4.223693] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at > 0xbe100000, irq 22 > [ 4.234981] NET: Registered protocol family 10 > [ 4.241266] Segment Routing with IPv6 > [ 4.245029] NET: Registered protocol family 17 > [ 4.249517] 8021q: 802.1Q VLAN Support v1.8 > [ 4.256516] hctosys: unable to open rtc device (rtc0) > [ 4.268945] VFS: Mounted root (squashfs filesystem) readonly on device > 31:5. > [ 4.280996] Freeing unused kernel memory: 1236K > [ 4.285530] This architecture does not have kernel memory protection. > [ 5.081003] init: Console is alive > [ 5.084684] init: - watchdog - > [ 6.517665] mtk_soc_eth 1e100000.ethernet eth0: port 1 link up > [ 7.139026] kmodloader: loading kernel modules from /etc/modules-boot.d/* > [ 7.294061] usbcore: registered new interface driver usbfs > [ 7.299662] usbcore: registered new interface driver hub > [ 7.305276] usbcore: registered new device driver usb > [ 7.358336] SCSI subsystem initialized > [ 7.374839] libata version 3.00 loaded. > [ 7.378342] bus=0x3, slot = 0x2, irq=0x0 > [ 7.382417] ahci 0000:03:00.0: version 3.0 > [ 7.382596] ahci 0000:03:00.0: SSS flag set, parallel bus scan disabled > [ 7.389239] ahci 0000:03:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 > impl IDE mode > [ 7.397240] ahci 0000:03:00.0: flags: 64bit ncq sntf stag led clo pmp pio > slum part ccc sxs > [ 7.407968] scsi host0: ahci > [ 7.411615] scsi host1: ahci > [ 7.414789] ata1: SATA max UDMA/133 abar m512@0x60300000 port 0x60300100 > irq 26 > [ 7.422101] ata2: SATA max UDMA/133 abar m512@0x60300000 port 0x60300180 > irq 26 > [ 7.770593] ata1: SATA link down (SStatus 0 SControl 300) > [ 8.110583] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) > [ 8.117043] ata2.00: ATA-9: WDC WDS120G2G0A-00JH30, UE450000, max UDMA/133 > [ 8.123907] ata2.00: 234455040 sectors, multi 1: LBA48 NCQ (depth 31/32) > [ 8.136074] ata2.00: configured for UDMA/133 > [ 8.141072] scsi 1:0:0:0: Direct-Access ATA WDC WDS120G2G0A- 0000 > PQ: 0 ANSI: 5 > [ 8.151374] sd 1:0:0:0: [sda] 234455040 512-byte logical blocks: (120 > GB/112 GiB) > [ 8.158945] sd 1:0:0:0: [sda] Write Protect is off > [ 8.163738] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 > [ 8.163930] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, > doesn't support DPO or FUA > [ 8.175472] sda: sda1 > [ 8.179936] sd 1:0:0:0: [sda] Attached SCSI disk > [ 8.191138] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vbus not found, > using dummy regulator > [ 8.199866] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vusb33 not found, > using dummy regulator > [ 8.208828] xhci-mtk 1e1c0000.xhci: xHCI Host Controller > [ 8.214173] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus > number 1 > [ 8.230756] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 > quirks 0x0000000000210010 > [ 8.239939] xhci-mtk 1e1c0000.xhci: irq 21, io mem 0x1e1c0000 > [ 8.246713] hub 1-0:1.0: USB hub found > [ 8.250640] hub 1-0:1.0: 2 ports detected > [ 8.255263] xhci-mtk 1e1c0000.xhci: xHCI Host Controller > [ 8.260669] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus > number 2 > [ 8.268136] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed > [ 8.274792] usb usb2: We don't know the algorithms for LPM for this host, > disabling LPM. > [ 8.283784] hub 2-0:1.0: USB hub found > [ 8.287609] hub 2-0:1.0: 1 port detected > [ 8.364965] kmodloader: done loading kernel modules from > /etc/modules-boot.d/* > [ 8.380970] init: - preinit - > [ 8.410283] mmc0: new high speed SDHC card at address 0001 > [ 8.416874] mmcblk0: mmc0:0001 SD16G 14.5 GiB > [ 8.422931] mmcblk0: p1 > [ 8.770627] usb 1-2: new high-speed USB device number 2 using xhci-mtk > [ 8.990032] random: procd: uninitialized urandom read (4 bytes read) > [ 9.591926] mtk_soc_eth 1e100000.ethernet: PPE started > [ 13.968763] jffs2: notice: (560) jffs2_build_xattr_subsystem: complete > building xattr subsystem, 3 of xdatum (0 unchecked, 1 orphan) and 3 of xref > (1 dead, 0 orphan) found. > [ 13.986700] mount_root: switching to jffs2 overlay > [ 14.022588] overlayfs: upper fs does not support tmpfile. > [ 14.034779] urandom-seed: Seeding with /etc/urandom.seed > [ 14.119024] mtk_soc_eth 1e100000.ethernet: 0x100 = 0x6060000c, 0x10c = > 0x80818 > [ 14.134986] procd: - early - > [ 14.137975] procd: - watchdog - > [ 14.284751] random: crng init done > [ 14.810827] procd: - watchdog - > [ 14.814343] procd: - ubus - > [ 14.876562] procd: - init - > [ 17.368834] kmodloader: loading kernel modules from /etc/modules.d/* > [ 17.396659] tun: Universal TUN/TAP device driver, 1.6 > [ 17.419381] ip6_tables: (C) 2000-2006 Netfilter Core Team > [ 17.443499] usbcore: registered new interface driver cdc_wdm > [ 17.452781] Loading modules backported from Linux version > v5.4-rc8-0-gaf42d3466bdc > [ 17.460344] Backport generated by backports.git v5.4-rc8-1-0-g368e8c51 > [ 17.471732] ip_tables: (C) 2000-2006 Netfilter Core Team > [ 17.492855] nf_conntrack version 0.5.0 (8192 buckets, 32768 max) > [ 17.555205] urngd: v1.0.2 started. > [ 17.568477] usbcore: registered new interface driver usbserial > [ 17.574648] usbcore: registered new interface driver usbserial_generic > [ 17.581394] usbserial: USB Serial support registered for generic > [ 17.595893] wireguard: WireGuard 0.0.20200215 loaded. See > www.wireguard.com for information. > [ 17.604380] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld > <ja...@zx2c4.com>. All Rights Reserved. > [ 17.634409] xt_time: kernel timezone is -0000 > [ 17.755582] bus=0x1, slot = 0x0, irq=0xff > [ 17.759851] mt7603e 0000:01:00.0: ASIC revision: 76030010 > [ 19.202019] mt7603e 0000:01:00.0: Firmware Version: ap_pcie > [ 19.207594] mt7603e 0000:01:00.0: Build Time: 20160107100755 > [ 19.250580] mt7603e 0000:01:00.0: firmware init done > [ 19.419817] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' > [ 19.438522] bus=0x2, slot = 0x1, irq=0xff > [ 19.442938] mt76x2e 0000:02:00.0: ASIC revision: 76120044 > [ 20.242838] mt76x2e 0000:02:00.0: ROM patch build: 20141115060606a > [ 20.252627] mt76x2e 0000:02:00.0: Firmware Version: 0.0.00 > [ 20.258119] mt76x2e 0000:02:00.0: Build: 1 > [ 20.262265] mt76x2e 0000:02:00.0: Build Time: 201507311614____ > [ 20.290569] mt76x2e 0000:02:00.0: Firmware running! > [ 20.298547] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht' > [ 20.306087] PPP generic driver version 2.4.2 > [ 20.312296] NET: Registered protocol family 24 > [ 20.320725] qmi_wwan 1-2:1.4: cdc-wdm0: USB WDM device > [ 20.328030] qmi_wwan 1-2:1.4 wwan0: register 'qmi_wwan' at > usb-1e1c0000.xhci-2, WWAN/QMI device, 22:7f:81:5d:34:75 > [ 20.338730] usbcore: registered new interface driver qmi_wwan > [ 20.348443] usbcore: registered new interface driver option > [ 20.354278] usbserial: USB Serial support registered for GSM modem (1-port) > [ 20.361751] option 1-2:1.0: GSM modem (1-port) converter detected > [ 20.368264] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB0 > [ 20.375698] option 1-2:1.1: GSM modem (1-port) converter detected > [ 20.382345] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB1 > [ 20.389722] option 1-2:1.2: GSM modem (1-port) converter detected > [ 20.396328] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB2 > [ 20.403725] option 1-2:1.3: GSM modem (1-port) converter detected > [ 20.410289] usb 1-2: GSM modem (1-port) converter now attached to ttyUSB3 > [ 20.420910] kmodloader: done loading kernel modules from /etc/modules.d/* > [ 38.651152] mtk_soc_eth 1e100000.ethernet: PPE started > [ 38.662679] br-lan: port 1(eth0.1) entered blocking state > [ 38.668153] br-lan: port 1(eth0.1) entered disabled state > [ 38.674180] device eth0.1 entered promiscuous mode > [ 38.679063] device eth0 entered promiscuous mode > [ 38.691079] br-lan: port 1(eth0.1) entered blocking state > [ 38.696492] br-lan: port 1(eth0.1) entered forwarding state > [ 38.702402] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready > [ 39.722362] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready > [ 84.740892] jffs2: Erase at 0x01ab0000 failed immediately: errno -22 > [ 1586.828986] F2FS-fs (sda1): Found nat_bits in checkpoint > [ 1595.128977] F2FS-fs (sda1): Mounted with checkpoint version = 35fafab1 > > > > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/mailman/listinfo/openwrt-devel _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
