This updates the device definition name for octeon target to provide more useful names for the images and be consistent with the increasing number of targets following that scheme.
Since the target is not using device tree yet, this does not touch board_name and thus sets BOARD_NAME in image Makefile to ensure sysupgrade is still working. Signed-off-by: Adrian Schmutzler <freif...@adrianschmutzler.de> --- target/linux/octeon/image/Makefile | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/target/linux/octeon/image/Makefile b/target/linux/octeon/image/Makefile index 42bd5df1da..cb79a9ddf5 100644 --- a/target/linux/octeon/image/Makefile +++ b/target/linux/octeon/image/Makefile @@ -30,19 +30,21 @@ endef TARGET_DEVICES += generic ER_CMDLINE:=-mtdparts=phys_mapped_flash:640k(boot0)ro,640k(boot1)ro,64k(eeprom)ro root=/dev/mmcblk0p2 rootfstype=squashfs,ext4 rootwait -define Device/er +define Device/ubnt_edgerouter DEVICE_VENDOR := Ubiquiti DEVICE_MODEL := EdgeRouter - CMDLINE := $(ER_CMDLINE) + BOARD_NAME := er + CMDLINE := $(ER_CMDLINE) endef -TARGET_DEVICES += er +TARGET_DEVICES += ubnt_edgerouter ERLITE_CMDLINE:=-mtdparts=phys_mapped_flash:512k(boot0)ro,512k(boot1)ro,64k(eeprom)ro root=/dev/sda2 rootfstype=squashfs,ext4 rootwait -define Device/erlite +define Device/ubnt_edgerouter-lite DEVICE_VENDOR := Ubiquiti DEVICE_MODEL := EdgeRouter Lite - CMDLINE := $(ERLITE_CMDLINE) + BOARD_NAME := erlite + CMDLINE := $(ERLITE_CMDLINE) endef -TARGET_DEVICES += erlite +TARGET_DEVICES += ubnt_edgerouter-lite $(eval $(call BuildImage)) -- 2.20.1 _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
