(resent due to me being lazy and using reply-to, apologies and pls ignore previous thread)
This patchset introduces support for two Netgear dual-band routers based on the same PCB (29764821) with QCA9563 SoC, AR9580 5GHz chip, 128 MiB RAM, 2 MiB SPI-NOR + 128 MiB SPI-NAND flash: * Netgear WNDR4300 v2 * Netgear WNDR4500 v3 WNDR4300v2 has been tested successfully with this patchset applied to master branch. Since I have no access to 4500v3, configuration for this device is based on information provided by various websites, including abandoned ar71xx patch https://patchwork.ozlabs.org/patch/809227/ Note: technical wikis claim device is running CPU @ 750 MHz, while on my WNDR4300v2 both u-boot and OpenWrt report CPU clock value of 775 MHz. MAC address printed on device label is for LAN interface (ART offset 0x0). Patch #1 is a prerequisite and allows to unmask certain pins for ath9k-compatible wireless chips using Device Tree definition. Parameter is labelled "qca,gpio-mask" and accepts u32 value (see *_GPIO_MASK constants in ath9k/reg.h file). One of main reasons for blocking access to these pins is that they provide only one-way communication (in or out). Here - setting new mask to 0xf6ff (default one is 0xf4ff) enables RFKILL button wired to input pin 9. Patch list (3): mac80211: ath9k: add GPIO mask dts property ath79: add support for Netgear WNDR4300 v2 ath79: add support for Netgear WNDR4500 v3 package/boot/uboot-envtools/files/ath79 | 2 + .../patches/ath/553-ath9k_of_gpio_mask.patch | 25 ++ .../linux/ath79/dts/qca9563_netgear_wndr.dtsi | 262 ++++++++++++++++++ .../ath79/dts/qca9563_netgear_wndr4300-v2.dts | 19 ++ .../ath79/dts/qca9563_netgear_wndr4500-v3.dts | 41 +++ target/linux/ath79/image/nand.mk | 22 ++ .../ath79/nand/base-files/etc/board.d/01_leds | 4 +- .../nand/base-files/etc/board.d/02_network | 8 +- .../etc/hotplug.d/firmware/10-ath9k-eeprom | 8 +- 9 files changed, 386 insertions(+), 5 deletions(-) create mode 100644 package/kernel/mac80211/patches/ath/553-ath9k_of_gpio_mask.patch create mode 100644 target/linux/ath79/dts/qca9563_netgear_wndr.dtsi create mode 100644 target/linux/ath79/dts/qca9563_netgear_wndr4300-v2.dts create mode 100644 target/linux/ath79/dts/qca9563_netgear_wndr4500-v3.dts -- 2.24.1 _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
