[OpenWrt-Devel] [PATCH 1/2] ramips: add label MAC address for TP-Link Archer C20i

[Adrian Schmutzler]

Current OpenWrt MAC setup:
eth0             &rom 0xf100    :48
eth0.2           eth0+1         :49
wlan0 (5 GHz)    &radio 0x8004  different OUI
wlan1 (2.4 GHz)  &radio 0x4     same OUI as wlan0

Label MAC address corresponds to eth0 (&ethernet).

No additional addresses found in hexdump of rom/radio.

Signed-off-by: Adrian Schmutzler <freif...@adrianschmutzler.de>
---
 target/linux/ramips/dts/mt7620a_tplink_archer-c20i.dts | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/target/linux/ramips/dts/mt7620a_tplink_archer-c20i.dts 
b/target/linux/ramips/dts/mt7620a_tplink_archer-c20i.dts
index e085162531..5ee6d67192 100644
--- a/target/linux/ramips/dts/mt7620a_tplink_archer-c20i.dts
+++ b/target/linux/ramips/dts/mt7620a_tplink_archer-c20i.dts
@@ -9,6 +9,10 @@
        compatible = "tplink,archer-c20i", "ralink,mt7620a-soc";
        model = "TP-Link Archer C20i";
 
+       aliases {
+               label-mac-device = &ethernet;
+       };
+
        chosen {
                bootargs = "console=ttyS0,115200";
        };
-- 
2.20.1


_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel