Hi, There are now quite some changes in the OpenWrt 19.07 branch compared to the 19.07-rc1.
The builds are looking ok: http://buildbot.openwrt.org/openwrt-19.07/images/grid I looked through the responses to 19.07-rc1 in the forum and the bug tracker and it looks mostly good. https://forum.openwrt.org/t/openwrt-19-07-0-first-release-candidate/48040 https://bugs.openwrt.org/index.php?reported%5B%5D=10 I saw the following reports: MT7621/MT7620: NETDEV WATCHDOG: eth0 (mtk_soc_eth): https://bugs.openwrt.org/index.php?do=details&task_id=2628 https://bugs.openwrt.org/index.php?do=details&task_id=2617 https://bugs.openwrt.org/index.php?do=details&task_id=2605 It looks like there is a throughput problem with ath10k-ct on QCA9984, https://bugs.openwrt.org/index.php?do=details&task_id=2593 there are multiple reports in the Forum. For me QCA9880 on a BTHH5A with ath10k-ct on 5GHz works in openwrt 19.07 The AP can do 180 MBit/s TX and only 40 Mbit/s RX over about 8m with a wall in between with sae-mixed to a Intel iwl8265. It is also very close to 40MBit/s not much changing the lowest I saw in about 30 outputs from iperf3 was 38.8 MBit/s and them highest 41.2 MBit/s Are there any more known regressions and serious bugs? Images for the following devices are probably too big: * WR902AC * EnGenius ESR-9752 ( EnGenius ESR-9753 ) Jow has some pending patches to deactivate support for some of them: https://patchwork.ozlabs.org/project/openwrt/list/?series=143332 This looks good to me. We should mention how to install wpad-openssl or wpad-wolfssl to get WPA3 support in the release notes. Hauke
signature.asc
Description: OpenPGP digital signature
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
