The old GPIO based phy reset (phy-reset-gpio) will be removed form
the ipq40xx mdio driver in the future.
Signed-off-by: Daniel Danzberger <dan...@dd-wrt.com>
---
.../files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git
a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts
b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts
index b6eb99278b..e75d07606a 100644
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts
+++ b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-wpj419.dts
@@ -236,9 +236,10 @@
mdio@90000 {
status = "okay";
- phy-reset-gpio = <&tlmm 47 0>;
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
+ reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
+ reset-delay-us = <5000>;
};
ess-psgmii@98000 {
--
2.24.0.rc1
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
