Hi Ben,
When do you think you can port those changes to your firmware? Thank you for your support. Klevis. On Fri, Sep 20, 2019 at 10:01 PM +0200, "Ben Greear" <gree...@candelatech.com> wrote: On 9/20/19 12:55 PM, Vincent Wiemann wrote: > Hi Klevis, > > have you tried it with a short distance? > If you did you should better ask Ben Greear directly. I asked him to post publicly so that others can help answer and that my own answers might help someone else. I have some patches that should enable coverage class settings for wave-2, but I am too busy with other things right now to port them to my ath10k-ct driver/firmware. Thanks, Ben > > By the way ath10k gen 2 chipsets don't work very well with long distance > links without a > special feature which implementation is only available to companies like > Ubiquiti and very few > people who have an own reverse-engineered implementation. > It works on IPQ401X, QCA9886 and QCA9888 based chips only. > > And it is not possible to set a coverage class for gen 2 devices, yet as far > as I know due to missing > documentation and implementation (correct me if that information is outdated). > Furthermore a high channel width often results in problems > due to lower receiver sensibility. > We have better experiences with lower channel widths and sometimes get more > throughput with that. > > Actually I think this does not explain your connection issues as 13 km is not > that much. > > Regards, > > Vincent Wiemann > > On 20.09.19 18:30, supp...@maxnet.al wrote: >> Hello everyone, >> >> I am trying to setup a custom made outdoor link with Apu2d2 board devices >> and QCA9994 cards from compex. After i installed openwrt and ath10k ct >> driver, kmod ath10k and board-2.bin the device can run a 80MHz channel in >> WDS AP. The problem is that it won't run as station or station wds. It can >> scan >> the SSIDs but won't connect them. >> >> Any suggestion? >> >> Thank you! >> Klevis >> > > _______________________________________________ > openwrt-devel mailing list > openwrt-devel@lists.openwrt.org > https://lists.openwrt.org/mailman/listinfo/openwrt-devel > -- Ben Greear Candela Technologies Inc http://www.candelatech.com
_______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
