> Am 15.09.2019 um 22:46 schrieb Daniel Golle <[email protected]>: > > Hi Ivan, > > On Sun, Sep 15, 2019 at 09:28:35PM +0200, Ivan Hörler wrote: >> Hi >> Now after nowing how to make a PR, im interested to know how you think about >> some thaughts of me. >> >> Linkit Smart 7688 has a blast of tools they offer in the original firmware >> bild. Compared the one openWRT offers is verry slim. >> Is that ment to be so or did nobody care until me? >> >> Some of the Tools: >> 1. Automatic activation as Accesspoint, because the board is ment for IOT >> and has no Ethernet port. Right now with the official OpenWRT build can not >> be connected to any network without addtional Serial converter. > > This has been a lengthy debate and if at all, then activating wifi > by default should only be done on devices without any ethernet. > LinkIt Smart is a devboard and Ethernet may well be attached, but > there are examples of consumer systems without any Ethernet port > which are useless unless wifi is enabled by default. > Most recent debate is here > https://github.com/openwrt/openwrt/pull/2408 > <https://github.com/openwrt/openwrt/pull/2408>
It looks to me as the Devolo Magic 2 Device has Ethernet ports. The Linkit Smart 7688 is a bare Development board with no Ethernet socket. The only way to configure a openWRT without wifi, is to buy another tool. A serial to usb adapter and wire the bins to the RX/TX of the board. In my eyes its no security risk to enable the accesspoint feature in the same way as Mediatek does in the official firmware on a dev-board. I would also apply the same forced self defined password to the same mac-adress based ssid as described in the manual <https://labs.mediatek.com/en/download/ih80Qtjo> so a user that buy’s that device can switch to recent openWRT OS without to read separate doc’s. proposal: ssid=LinkIt_Smart_7688-[ending6digid-MAC-address] could look like: ssid=LinkIt_Smart_7688-6AYR2N do you agree in this? > >> >> 2. Luci WebGUI > > LuCI is shipped with OpenWrt releases by default, but not in the > development snapshots. Good. I noticed that already. Does Luci already provide a check if a password exists before login? Mediatek developed a selfmade reduced GUI to force Users to set a Password before a Login is possible. Its made as a Web-form that checks if a password exists and forces the user to set a password if none exists. If not, do you agree to let me develop such forced password seting? > >> >> 3. Language: Python with PIP >> >> 4. Language: Node with NPM >> >> 5. mraa from Intel >> >> 6. some upm modules from Intel >> >> What of this list wold be possible to integrate in to a official openWRT >> release without scratching rules? > > All those other things are installable using 'opkg' on the running > system. Or you may use the ImageBuilder to build images with software > of your choice preinstalled. I will test this packages after solveing Number 1 & 2. > > > Cheers > > > Daniel > >> >> Regards, Ivan Hörler >> _______________________________________________ >> openwrt-devel mailing list >> [email protected] >> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
_______________________________________________ openwrt-devel mailing list [email protected] https://lists.openwrt.org/mailman/listinfo/openwrt-devel
