Hello Adrian,
On 9/2/19 6:13 PM, Adrian Schmutzler wrote:
> Hi,
>
> we just have encountered the case of a 5 GHz radio on a MT7610E chip that
> does not provide its MAC address via caldata.
>
> We tried the following:
>
> &pcie0 {
> wifi@0,0 {
> reg = <0x0000 0 0 0 0>;
> mediatek,mtd-eeprom = <&factory 0x8000>;
> ieee80211-freq-limit = <5000000 6000000>;
> mtd-mac-address = <&factory 0x28>;
> mtd-mac-address-increment = <2>;
> };
> };
>
> But the device insists on using the address from 0x8004.
>
> Any ideas? Is mtd-mac-address(-increment) not implemented for this chip?
This issue persists for quite some time, the mt76 driver does not
call mt76_eeprom_override upon initialization. I'm sadly not aware why
this is the case. A PR for this is open in mt76 for quite some time.
You might have some luck pinging mbd directly or going thru linux-wireless.
See https://github.com/openwrt/mt76/pull/209
Best wishes
David
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
