First group the interfaces on the DSA switch into the right LAN/WAN groups. Tested successfully on the Itian Square One SQ201 and the SL93512 reference design with the Vitesse DSA switches.
The RTL8366RB on the DIR-685 is still under development but this setup is a starting point but since the WAN and the LAN ports share the same ethernet CPU port the ethernet port should not be part of either WAN or LAN. Signed-off-by: Linus Walleij <linus.wall...@linaro.org> --- .../gemini/base-files/etc/board.d/02_network | 25 +++++++++++++++++++ 1 file changed, 25 insertions(+) create mode 100755 target/linux/gemini/base-files/etc/board.d/02_network diff --git a/target/linux/gemini/base-files/etc/board.d/02_network b/target/linux/gemini/base-files/etc/board.d/02_network new file mode 100755 index 000000000000..87f888e92c28 --- /dev/null +++ b/target/linux/gemini/base-files/etc/board.d/02_network @@ -0,0 +1,25 @@ +#!/bin/sh + +. /lib/functions/uci-defaults.sh + +board_config_update + +case "$(board_name)" in +storlink,gemini324) + # These are all connected to eth1 thru VSC7385 + ucidef_set_interfaces_lan_wan "eth1 lan1 lan2 lan3 lan4" "eth0" + ;; +itian,sq201) + # These are all connected to eth1 thru VSC7395 + ucidef_set_interfaces_lan_wan "eth1 lan1 lan2 lan3 lan4" "eth0" + ;; +dlink,dir-685) + # These are all connected to eth0 thru RTL8366RB + ucidef_set_interface "eth" ifname "eth0" protocol "none" + ucidef_set_interfaces_lan_wan "lan0 lan1 lan2 lan3" "wan" + ;; +esac + +board_config_flush + +exit 0 -- 2.21.0 _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
