On 6/5/19 4:31 PM, Tomasz Maciej Nowak wrote:
> From: Marko Ratkaj <marko.rat...@sartura.hr>
>
> Cc: Vladimir Vid <vladimir....@sartura.hr>
> Signed-off-by: Marko Ratkaj <marko.rat...@sartura.hr>
> [added sfp related patches from Russell King]
> Signed-off-by: Marek Behún <marek.be...@nic.cz>
> [rebase; rework patches; separate and cleanup kernel configs;
> add espessobin dts; adjust venom dts]
> Signed-off-by: Tomasz Maciej Nowak <tome...@o2.pl>
> ---
> target/linux/mvebu/Makefile | 1 +
> target/linux/mvebu/config-4.19 | 501 ++++++++++++
> .../cortexa53/{config-default => config-4.14} | 0
> target/linux/mvebu/cortexa53/config-4.19 | 114 +++
> .../cortexa72/{config-default => config-4.14} | 0
> target/linux/mvebu/cortexa72/config-4.19 | 122 +++
> .../arm/boot/dts/armada-385-linksys-venom.dts | 213 +++++
> .../marvell/armada-3720-espressobin-emmc.dts | 28 +
> .../armada-3720-espressobin-v7-emmc.dts | 43 +
> .../marvell/armada-3720-espressobin-v7.dts | 31 +
> .../patches-4.19/002-add_powertables.patch | 770 ++++++++++++++++++
> .../patches-4.19/003-add_switch_nodes.patch | 40 +
> .../004-add_sata_disk_activity_trigger.patch | 39 +
> ...5-linksys_hardcode_nand_ecc_settings.patch | 17 +
> ...Mangle-bootloader-s-kernel-arguments.patch | 201 +++++
> .../patches-4.19/100-find_active_root.patch | 60 ++
> .../patches-4.19/102-revert_i2c_delay.patch | 15 +
> .../205-armada-385-rd-mtd-partitions.patch | 19 +
> .../206-ARM-mvebu-385-ap-Add-partitions.patch | 35 +
> .../210-clearfog_switch_node.patch | 21 +
> .../220-disable-untested-dsa-boards.patch | 30 +
> ...-armada-xp-linksys-mamba-broken-idle.patch | 10 +
> .../300-mvneta-tx-queue-workaround.patch | 35 +
> ...dicate-failure-to-enter-deeper-sleep.patch | 40 +
> ...-pci-mvebu-time-out-reset-on-link-up.patch | 60 ++
> ...-call-mac_config-during-resolve-when.patch | 44 +
> ...ink-ensure-inband-AN-works-correctly.patch | 59 ++
> ...etdev-sfp_bus-and-use-for-start-stop.patch | 39 +
> ...5-net-phy-marvell10g-add-SFP-support.patch | 155 ++++
> .../406-sfp-add-sfp-compatible.patch | 24 +
> ...7-sfp-display-SFP-module-information.patch | 297 +++++++
> .../408-sfp-more-cotsworks-fixes.patch | 44 +
> ...da388-clearfog-emmc-on-clearfog-base.patch | 87 ++
> ...rmada388-clearfog-document-MPP-usage.patch | 124 +++
> .../patches-4.19/450-reprobe_sfp_phy.patch | 94 +++
> ...l-armada37xx-Add-emmc-sdio-pinctrl-d.patch | 40 +
> ...l-armada-37xx-Enable-emmc-on-espress.patch | 49 ++
> ...ts-marvell-armada37xx-Add-eth0-alias.patch | 20 +
> ...da-3720-espressobin-correct-spi-node.patch | 58 ++
> ...l-armada-3720-espressobin-add-ports-.patch | 26 +
> ...rdvark-Convert-to-use-pci_host_probe.patch | 44 +
> ...-device-to-the-same-MAX-payload-size.patch | 138 ++++
> ...ardvark-disable-LOS-state-by-default.patch | 55 ++
> ...ark-allow-to-specify-link-capability.patch | 43 +
> ...-3720-espressobin-set-max-link-to-ge.patch | 73 ++
> 45 files changed, 3958 insertions(+)
> create mode 100644 target/linux/mvebu/config-4.19
> rename target/linux/mvebu/cortexa53/{config-default => config-4.14} (100%)
> create mode 100644 target/linux/mvebu/cortexa53/config-4.19
> rename target/linux/mvebu/cortexa72/{config-default => config-4.14} (100%)
> create mode 100644 target/linux/mvebu/cortexa72/config-4.19
> create mode 100644
> target/linux/mvebu/files-4.19/arch/arm/boot/dts/armada-385-linksys-venom.dts
> create mode 100644
> target/linux/mvebu/files-4.19/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts
> create mode 100644
> target/linux/mvebu/files-4.19/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
> create mode 100644
> target/linux/mvebu/files-4.19/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
> create mode 100644 target/linux/mvebu/patches-4.19/002-add_powertables.patch
> create mode 100644 target/linux/mvebu/patches-4.19/003-add_switch_nodes.patch
> create mode 100644
> target/linux/mvebu/patches-4.19/004-add_sata_disk_activity_trigger.patch
> create mode 100644
> target/linux/mvebu/patches-4.19/005-linksys_hardcode_nand_ecc_settings.patch
> create mode 100644
> target/linux/mvebu/patches-4.19/006-mvebu-Mangle-bootloader-s-kernel-arguments.patch
> create mode 100644 target/linux/mvebu/patches-4.19/100-find_active_root.patch
> create mode 100644 target/linux/mvebu/patches-4.19/102-revert_i2c_delay.patch
> create mode 100644
> target/linux/mvebu/patches-4.19/205-armada-385-rd-mtd-partitions.patch
> create mode 100644
> target/linux/mvebu/patches-4.19/206-ARM-mvebu-385-ap-Add-partitions.patch
> create mode 100644
> target/linux/mvebu/patches-4.19/210-clearfog_switch_node.patch
> create mode 100644
> target/linux/mvebu/patches-4.19/220-disable-untested-dsa-boards.patch
> create mode 100644
> target/linux/mvebu/patches-4.19/230-armada-xp-linksys-mamba-broken-idle.patch
> create mode 100644
> target/linux/mvebu/patches-4.19/300-mvneta-tx-queue-workaround.patch
> create mode 100644
> target/linux/mvebu/patches-4.19/400-cpuidle-mvebu-indicate-failure-to-enter-deeper-sleep.patch
> create mode 100644
> target/linux/mvebu/patches-4.19/401-pci-mvebu-time-out-reset-on-link-up.patch
> create mode 100644
> target/linux/mvebu/patches-4.19/402-net-phylink-only-call-mac_config-during-resolve-when.patch
> create mode 100644
> target/linux/mvebu/patches-4.19/403-net-phylink-ensure-inband-AN-works-correctly.patch
> create mode 100644
> target/linux/mvebu/patches-4.19/404-sfp-provide-netdev-sfp_bus-and-use-for-start-stop.patch
> create mode 100644
> target/linux/mvebu/patches-4.19/405-net-phy-marvell10g-add-SFP-support.patch
> create mode 100644
> target/linux/mvebu/patches-4.19/406-sfp-add-sfp-compatible.patch
> create mode 100644
> target/linux/mvebu/patches-4.19/407-sfp-display-SFP-module-information.patch
> create mode 100644
> target/linux/mvebu/patches-4.19/408-sfp-more-cotsworks-fixes.patch
> create mode 100644
> target/linux/mvebu/patches-4.19/412-ARM-dts-armada388-clearfog-emmc-on-clearfog-base.patch
> create mode 100644
> target/linux/mvebu/patches-4.19/415-ARM-dts-armada388-clearfog-document-MPP-usage.patch
> create mode 100644 target/linux/mvebu/patches-4.19/450-reprobe_sfp_phy.patch
> create mode 100644
> target/linux/mvebu/patches-4.19/513-arm64-dts-marvell-armada37xx-Add-emmc-sdio-pinctrl-d.patch
> create mode 100644
> target/linux/mvebu/patches-4.19/514-arm64-dts-marvell-armada-37xx-Enable-emmc-on-espress.patch
> create mode 100644
> target/linux/mvebu/patches-4.19/520-arm64-dts-marvell-armada37xx-Add-eth0-alias.patch
> create mode 100644
> target/linux/mvebu/patches-4.19/521-arm64-dts-armada-3720-espressobin-correct-spi-node.patch
> create mode 100644
> target/linux/mvebu/patches-4.19/522-arm64-dts-marvell-armada-3720-espressobin-add-ports-.patch
> create mode 100644
> target/linux/mvebu/patches-4.19/523-Revert-PCI-aardvark-Convert-to-use-pci_host_probe.patch
> create mode 100644
> target/linux/mvebu/patches-4.19/524-PCI-aardvark-set-host-and-device-to-the-same-MAX-payload-size.patch
> create mode 100644
> target/linux/mvebu/patches-4.19/526-PCI-aardvark-disable-LOS-state-by-default.patch
> create mode 100644
> target/linux/mvebu/patches-4.19/527-PCI-aardvark-allow-to-specify-link-capability.patch
> create mode 100644
> target/linux/mvebu/patches-4.19/528-arm64-dts-armada-3720-espressobin-set-max-link-to-ge.patch
>
> diff --git a/target/linux/mvebu/Makefile b/target/linux/mvebu/Makefile
> index a920f6db7d..f39573c002 100644
> --- a/target/linux/mvebu/Makefile
> +++ b/target/linux/mvebu/Makefile
> @@ -13,6 +13,7 @@ SUBTARGETS:=cortexa9 cortexa53 cortexa72
> MAINTAINER:=Imre Kaloz <ka...@openwrt.org>
>
> KERNEL_PATCHVER:=4.14
> +KERNEL_TESTING_PATCHVER:=4.19
>
> include $(INCLUDE_DIR)/target.mk
>
> diff --git a/target/linux/mvebu/config-4.19 b/target/linux/mvebu/config-4.19
> new file mode 100644
> index 0000000000..2c996d4dcb
> --- /dev/null
> +++ b/target/linux/mvebu/config-4.19
Please run "make target/linux/{clean,refresh} V=99" again to refresh
this configuration some options are now in the generic configuration
like CONFIG_MSCC_OCELOT_SWITCH.
......
> diff --git
> a/target/linux/mvebu/patches-4.19/404-sfp-provide-netdev-sfp_bus-and-use-for-start-stop.patch
>
> b/target/linux/mvebu/patches-4.19/404-sfp-provide-netdev-sfp_bus-and-use-for-start-stop.patch
> new file mode 100644
> index 0000000000..bd8f64dcbe
> --- /dev/null
> +++
> b/target/linux/mvebu/patches-4.19/404-sfp-provide-netdev-sfp_bus-and-use-for-start-stop.patch
> @@ -0,0 +1,39 @@
> +From 0068a89747e7c1d9a0bbb7282a34382a4274638a Mon Sep 17 00:00:00 2001
> +From: Russell King <rmk+ker...@armlinux.org.uk>
> +Date: Fri, 14 Apr 2017 16:41:55 +0100
> +Subject: [PATCH] sfp: provide netdev sfp_bus and use for start/stop
> +
> +Add a netdev sfp_bus pointer for propagating the phylink start/stop
> +actions to the SFP cage: the SFP cage may not be directly connected to
> +phylink, but may be the other side of a fixed PHY, and SFP needs to
> +know when the netdev is brought up or taken down.
> +
> +Signed-off-by: Russell King <rmk+ker...@armlinux.org.uk>
> +---
> + drivers/net/phy/phylink.c | 8 ++++----
> + 1 file changed, 4 insertions(+), 4 deletions(-)
> +
> +--- a/drivers/net/phy/phylink.c
> ++++ b/drivers/net/phy/phylink.c
> +@@ -943,8 +943,8 @@ void phylink_start(struct phylink *pl)
> +
> + if (pl->link_an_mode == MLO_AN_FIXED && !IS_ERR(pl->link_gpio))
> + mod_timer(&pl->link_poll, jiffies + HZ);
> +- if (pl->sfp_bus)
> +- sfp_upstream_start(pl->sfp_bus);
> ++ if (pl->netdev->sfp_bus)
> ++ sfp_upstream_start(pl->netdev->sfp_bus);
> + if (pl->phydev)
> + phy_start(pl->phydev);
> + }
> +@@ -965,8 +965,8 @@ void phylink_stop(struct phylink *pl)
> +
> + if (pl->phydev)
> + phy_stop(pl->phydev);
> +- if (pl->sfp_bus)
> +- sfp_upstream_stop(pl->sfp_bus);
> ++ if (pl->netdev->sfp_bus)
> ++ sfp_upstream_stop(pl->netdev->sfp_bus);
> + if (pl->link_an_mode == MLO_AN_FIXED && !IS_ERR(pl->link_gpio))
> + del_timer_sync(&pl->link_poll);
> +
Is this patch still needed?
Shouldn't the SFP supported be integaretd into upstream now? I think the
SFP related patches should be mostly backports or older versions of the
upstream SFP support patches which wnet upstream.
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
