Dnia 2019-05-25, o godz. 09:30:29
Birger Koblitz <m...@birger-koblitz.de> napisał(a):
Hi,
> The model is also compatible with the newer EW-7478AC, at least the
> firmware can be cross-flashed after changing the magic bytes at the
> beginning of the image from RN79 to RN70. The newer device merely has
> external antennas.
Could you also add support for EW-7478AC? I can test it.
See my comments below.
> + compatible = "edimax,ew-7476rpc", "ralink,mt7620a-soc";
> + model = "Edimax EW7476RPC";
Should be "Edimax EW-7476RPC";
> + };
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + led_power: power {
> + label = "ew-7476rpc:green:power";
> + gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
> + };
> + internet {
> + label = "ew-7476rpc:green:internet";
> + gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
> + };
> + wlan2g {
> + label = "ew-7476rpc:blue:wlan2g";
> + gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
> + linux,default-trigger = "phy1tpt";
> + };
> + wlan5g {
> + label = "ew-7476rpc:blue:wlan5g";
> + gpios = <&gpio2 31 GPIO_ACTIVE_LOW>;
> + linux,default-trigger = "phy0tpt";
Missing indentation?
> +
> +/*
> + gpio_export {
> + compatible = "gpio-export";
> + #size-cells = <0>;
> + usb-power {
> + gpio-export,name="usb-power";
> + gpio-export,output=<1>;
> + gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
> + };
> + };
> + */
Remove comment.
> +
> +&gsw {
> + mediatek,port5 = "gmac";
> + mediatek,rtl8211e-reset = "yes";
Or better use mediatek,rtl8211e-reset = <1>;
>
> + pr_info("gsw: mt7620_hw_init: mdio_mode set, disabling ephy\n");
unnecessary comment
> struct platform_device *pdev = of_find_device_by_node(np);
> struct mt7620_gsw *gsw;
> + const char *rtl8211e_reset = NULL;
...
> -
> + of_property_read_string(np, "mediatek,rtl8211e-reset",
> &rtl8211e_reset);
> + if (rtl8211e_reset && !strcmp(rtl8211e_reset, "yes"))
> + reset_realtek_phy();
of_get_property(np, "mediatek,rtl8211e-reset", NULL) etc.
> + append-metadata | check-size $$$$(IMAGE_SIZE)
> + DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 kmod-usb-ohci kmod-phy-realtek
Edimax EW-7476RPC has USB port? Drop kmod-usb2 and kmod-usb-ohci package.
--
Pozdrawiam,
Cezary Jackiewicz
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
