The factory firmware omits the JFFS2 end-marker while flashing via
web-interface. Add a 64k padding after the marker fixes this problem.
When the end-marker is not present, OpenWRT won't save the overlayfs
after initial flash.
Reported-by: Andreas Ziegler <d...@andreas-ziegler.de>
Signed-off-by: David Bauer <m...@david-bauer.net>
---
target/linux/ramips/image/mt76x8.mk | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/target/linux/ramips/image/mt76x8.mk
b/target/linux/ramips/image/mt76x8.mk
index 571ddf3d51..ba3354a8a6 100644
--- a/target/linux/ramips/image/mt76x8.mk
+++ b/target/linux/ramips/image/mt76x8.mk
@@ -135,7 +135,7 @@ define Device/netgear_r6120
IMAGES += factory.img
IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE)| append-rootfs |
pad-rootfs
IMAGE/sysupgrade.bin := $$(IMAGE/default) | append-metadata | check-size
$$$$(IMAGE_SIZE)
- IMAGE/factory.img := pad-extra 576k | $$(IMAGE/default) | \
+ IMAGE/factory.img := pad-extra 576k | $$(IMAGE/default) | pad-to
$$$$(BLOCKSIZE) | \
sercom-footer | pad-to 128 | zip R6120.bin | sercom-seal
endef
TARGET_DEVICES += netgear_r6120
--
2.21.0
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
