This devices have LEDs connected to the SoC's GPIOs, so it makes no
sense to fiddle with ar8327 LED regs.
Tested-by: Adrian Schmutzler <freif...@adrianschmutzler.de>
Signed-off-by: Petr Štetiar <yn...@true.cz>
---
target/linux/ath79/dts/qca9563_tplink_archer-x7-v5.dtsi | 4 ----
1 file changed, 4 deletions(-)
diff --git a/target/linux/ath79/dts/qca9563_tplink_archer-x7-v5.dtsi
b/target/linux/ath79/dts/qca9563_tplink_archer-x7-v5.dtsi
index 84b938d..e57d1fd 100644
--- a/target/linux/ath79/dts/qca9563_tplink_archer-x7-v5.dtsi
+++ b/target/linux/ath79/dts/qca9563_tplink_archer-x7-v5.dtsi
@@ -161,10 +161,6 @@
qca,ar8327-initvals = <
0x04 0x00080080 /* PORT0 PAD MODE CTRL */
0x10 0x81000080 /* POWER_ON_STRIP */
- 0x50 0xcc35cc35 /* LED_CTRL0 */
- 0x54 0xcb37cb37 /* LED_CTRL1 */
- 0x58 0x00000000 /* LED_CTRL2 */
- 0x5c 0x00f3cf00 /* LED_CTRL3 */
0x7c 0x0000007e /* PORT0_STATUS */
>;
};
--
1.9.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
