Ben Greear <gree...@candelatech.com> [2019-04-05 07:22:51]:

Hi Ben,

while searching for the kmod with the same md5sum as the one used on the
device, I've found out, that OpenWrt is not using upstream ath10k kernel
module, so I don't want to make more noise on the ath10k mailing list[1], so
let's continue this topic on openwrt-devel where it probably belongs.

> Can you use gdb to print out the lines of code around that crash site in
> t2h_msg_handler?

> >  [<87622780>] ath10k_htt_t2h_msg_handler+0x27e0/0x31dc [ath10k_core]
(gdb) l *ath10k_htt_t2h_msg_handler+0x27e0
0x227b0 is in ath10k_htt_rx_handle_amsdu 
(/ath10k-ct-2019-03-25-2e917efb/ath10k-4.19/htt_rx.c:374).
369     
370                     /* FIXME: we must report msdu payload since this is 
what caller
371                      * expects now
372                      */
373                     skb_put(msdu, offsetof(struct htt_rx_desc, 
msdu_payload));
374                     skb_pull(msdu, offsetof(struct htt_rx_desc, 
msdu_payload));
375     
376                     /*
377                      * Sanity check - confirm the HW is finished filling in 
the
378                      * rx data.

> >  [<8764901c>] ath10k_ce_rx_update_write_idx+0x9c/0xc4 [ath10k_core]
(gdb) l* ath10k_ce_rx_update_write_idx+0x9c
0x4904c is in ath10k_ce_rx_update_write_idx 
(/opt/devel/openwrt-gluon/gluon.git/openwrt/build_dir/target-mips_24kc_musl/linux-ath79_generic/ath10k-ct-2019-03-25-2e917efb/ath10k-4.19/ce.c:763).
758             if (((cur_write_idx + nentries) & nentries_mask) == 
dest_ring->sw_index)
759                     nentries -= 1;
760     
761             write_index = CE_RING_IDX_ADD(nentries_mask, write_index, 
nentries);
762             ath10k_ce_dest_ring_write_index_set(ar, ctrl_addr, write_index);
763             dest_ring->write_index = write_index;
764     }
765     EXPORT_SYMBOL(ath10k_ce_rx_update_write_idx);
766     
767     int ath10k_ce_rx_post_buf(struct ath10k_ce_pipe *pipe, void *ctx,

> I can figure out which message caused it I can add debugging and/or 
> protective code.

Thanks and good luck!

1. http://lists.infradead.org/pipermail/ath10k/2019-April/013138.html

-- ynezz

_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel

Reply via email to