The port labled as "LAN" is eth1.
That's different from the -lite variant,
where the only existing port eth0 is used as LAN
Signed-off-by: Andreas Ziegler <d...@andreas-ziegler.de>
---
target/linux/ath79/base-files/etc/board.d/01_leds | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/target/linux/ath79/base-files/etc/board.d/01_leds
b/target/linux/ath79/base-files/etc/board.d/01_leds
index 0b0dda3bcf..66247ca55d 100755
--- a/target/linux/ath79/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/base-files/etc/board.d/01_leds
@@ -65,7 +65,7 @@ glinet,gl-ar150)
;;
glinet,gl-ar300m-nand|\
glinet,gl-ar300m-nor)
- ucidef_set_led_netdev "lan" "LAN" "gl-ar300m:green:lan" "eth0"
+ ucidef_set_led_netdev "lan" "LAN" "gl-ar300m:green:lan" "eth1"
;;
glinet,gl-ar300m-lite)
ucidef_set_led_netdev "lan" "LAN" "gl-ar300m-lite:green:lan" "eth0"
--
2.21.0
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
