This patchset goes on with the attempt to - speed up caldata/eeprom handling by reading blockwise, - merge the similar functions in one library.
It depends on the patch "ath79: speed up ath9k-eeprom extraction" by Dmitry Tunin to be applied beforehand. It replaces my earlier patchsets - Speed up caldata/eeprom handling for ar71xx/ath79 - Speed up caldata/eeprom handling with common file The patches 1 to 4 have been run-tested (all at once) on the following devices: TP-Link WDR4300 (ar71xx and ath79) Ubnt AC Mesh (ath79) TP-Link CPE210 v2 (ar71xx) The patches 5 and 6 are optional. Since a have no ipq40xx or ramips device at hand, I cannot test them. Thus, one can apply patches 1 to 4 and then easily do patches 5 and 6 if/after they are tested. (So they do not hold up the earlier patches.) However, it would be nice if someone did test ramips and ipq40xx. Adrian Schmutzler (6): ath79: Speed up caldata/eeprom handling ar71xx: Speed up caldata/eeprom handling ar71xx: Speed up mtd extraction in ar71xx.sh ar71xx/ath79: Merge eeprom/caldata extraction into eeprom.sh ipq40xx: Make use of common eeprom.sh library for caldata ramips: Merge ath9k-eeprom extraction to common eeprom.sh package/base-files/files/lib/functions/eeprom.sh | 91 ++++++++++++++++++++ .../etc/hotplug.d/firmware/10-ath9k-eeprom | 99 +++++----------------- .../etc/hotplug.d/firmware/11-ath10k-caldata | 80 ++++++----------- target/linux/ar71xx/base-files/lib/ar71xx.sh | 4 +- .../etc/hotplug.d/firmware/10-ath9k-eeprom | 86 ++++++------------- .../etc/hotplug.d/firmware/11-ath10k-caldata | 62 ++++---------- .../etc/hotplug.d/firmware/11-ath10k-caldata | 82 +++++------------- .../etc/hotplug.d/firmware/10-rt2x00-eeprom | 32 ++----- 8 files changed, 209 insertions(+), 327 deletions(-) create mode 100644 package/base-files/files/lib/functions/eeprom.sh -- 2.11.0 _______________________________________________ openwrt-devel mailing list openwrt-devel@lists.openwrt.org https://lists.openwrt.org/mailman/listinfo/openwrt-devel
