Reading and writing to and from flash storage is slow and currently,
especially since some scripts use a block size of 1 to be able skip.
This patch reworks the extraction scripts to be much faster and
efficient by reading and writing in possibly one big block.
This is based on the initial commit a69e101 for ipq40xx by
Christian Lamparter <chunk...@gmail.com>.
Speed comparison @ UBNT AC-Mesh (ath79, test performed manually)
results in a time reduction of 99.9 %.
> time dd if=/dev/mtd6 of=/lib/firmware/test-slow bs=1 count=4096 skip=4096
4096+0 records in
4096+0 records out
real 0m 16.84s
user 0m 0.07s
sys 0m 13.54s
> time dd if=/dev/mtd6 of=/lib/firmware/test-fast bs=4096 count=1 skip=4096
> iflag=skip_bytes
1+0 records in
1+0 records out
real 0m 0.02s
user 0m 0.00s
sys 0m 0.02s
Speed comparison @ TP-Link TL-WDR4300 (ar71xx, tested manually)
results in a time reduction of 99.9 %.
> time dd if=/dev/mtd3 of=/lib/firmware/test-slow bs=1 count=4096 skip=4096
4096+0 records in
4096+0 records out
real 0m 15.85s
user 0m 0.06s
sys 0m 13.28s
> time dd if=/dev/mtd3 of=/lib/firmware/test-fast bs=4096 count=1 skip=4096
> iflag=skip_bytes
1+0 records in
1+0 records out
real 0m 0.02s
user 0m 0.00s
sys 0m 0.02s
Signed-off-by: Adrian Schmutzler <freif...@adrianschmutzler.de>
---
package/base-files/files/lib/functions/eeprom.sh | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/package/base-files/files/lib/functions/eeprom.sh
b/package/base-files/files/lib/functions/eeprom.sh
index 13494b63db..f0941fe8d8 100644
--- a/package/base-files/files/lib/functions/eeprom.sh
+++ b/package/base-files/files/lib/functions/eeprom.sh
@@ -21,7 +21,7 @@ mtd_eeprom_extract() {
[ -n "$mtd" ] || \
eeprom_die "no mtd device found for partition $part"
- dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count
2>/dev/null || \
+ dd if=$mtd of=/lib/firmware/$FIRMWARE bs=$count skip=$offset count=1
iflag=skip_bytes 2>/dev/null || \
eeprom_die "failed to extract from $mtd"
}
@@ -41,7 +41,7 @@ mtd_eeprom_extract_check() {
[ "$count" = "$cal_size" ] || \
eeprom_die "no calibration data found in $part"
- dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count
2>/dev/null || \
+ dd if=$mtd of=/lib/firmware/$FIRMWARE bs=$count skip=$offset count=1
iflag=skip_bytes 2>/dev/null || \
eeprom_die "failed to extract from $mtd"
}
@@ -74,7 +74,7 @@ ubi_eeprom_extract() {
[ -n "$ubi" ] || \
eeprom_die "no UBI volume found for $part"
- dd if=/dev/$ubi of=/lib/firmware/$FIRMWARE bs=1 skip=$offset
count=$count 2>/dev/null || \
+ dd if=/dev/$ubi of=/lib/firmware/$FIRMWARE bs=$count skip=$offset
count=1 iflag=skip_bytes 2>/dev/null || \
eeprom_die "failed to extract from $ubi"
}
@@ -83,6 +83,6 @@ ath10kcal_from_file() {
local offset=$2
local count=$3
- dd if=$source of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count
2>/dev/null || \
+ dd if=$source of=/lib/firmware/$FIRMWARE bs=$count skip=$offset count=1
iflag=skip_bytes 2>/dev/null || \
ath10kcal_die "failed to extract calibration data from $source"
}
--
2.11.0
_______________________________________________
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
