10/12/2018 23:46, Petr Štetiar:
In ar71xx/mach-ubnt-xm.c there's following code:
static void __init ubnt_xw_init(void) {
...
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_MII_GMAC0 |
AR934X_ETH_CFG_MII_GMAC0_SLAVE);
...
}
But I couldn't find a way how to set it up via DTS.
Would you please add an explanation to the commit message what the
devicetree property does and why we might need it.
Mathias
Tested-by: Joe Ayers <[email protected]>
Signed-off-by: Petr Štetiar <[email protected]>
---
.../linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_gmac.c | 1 +
1 file changed, 1 insertion(+)
diff --git
a/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_gmac.c
b/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_gmac.c
index e69abb6..cc0a15d 100644
--- a/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_gmac.c
+++ b/target/linux/ath79/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_gmac.c
@@ -53,6 +53,7 @@ static void ag71xx_setup_gmac_934x(struct device_node *np,
void __iomem *base)
ag71xx_of_bit(np, "rgmii-gmac0", &val, AR934X_ETH_CFG_RGMII_GMAC0);
ag71xx_of_bit(np, "mii-gmac0", &val, AR934X_ETH_CFG_MII_GMAC0);
+ ag71xx_of_bit(np, "mii-gmac0-slave", &val,
AR934X_ETH_CFG_MII_GMAC0_SLAVE);
ag71xx_of_bit(np, "gmii-gmac0", &val, AR934X_ETH_CFG_GMII_GMAC0);
ag71xx_of_bit(np, "switch-phy-swap", &val, AR934X_ETH_CFG_SW_PHY_SWAP);
ag71xx_of_bit(np, "switch-only-mode", &val,
_______________________________________________
openwrt-devel mailing list
[email protected]
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
